Jump to content

GazAce

Members
  • Posts

    945
  • Joined

  • Last visited

Everything posted by GazAce

  1. I just flew my mission & yep same happened to me but I got a bit further than you did. I took out remaining WP-4 Targets & Radar unit at WP-5 then was heading for another pass to WP-5 & switched on Radio chatter. I was pausing mission on & off as was responding to texts on my mobile. Mission time was around 40 mins when it froze & was weird because all sounds kept playing.. radio chatter & aircraft noise. It's pretty disappointing as I spent months putting it together because of other issues of bombs not releasing from the plane. Anyway, I don't know what to do man, it's a bummer. We should be able to run all missions we create from the ME that don't have Mods.. without all this bs going on you know. Gaz I'm going to give Rise of The Persian Lion Campaign a go & forget about it for now anyway debrief.log
  2. Hey just purchased! Looking forward to doing something different & a nice break from my own stuff here. This looks great & was a reasonable price too.. even with my exchange rate. Thanks for creating Badger633
  3. Yea thanks for that but all my bindings are cool. It's still very clunky at best, no where near as smooth & fluid as it used to be but I've only tried in Cyprus map in a highly built up area with ATFLIR only because it's my latest mission. Thanks for the input though, appreciate
  4. I used to be able to rattle off 4 MAVS & nail 4 moving TGTS in one pass, just check out some of my YouTube Vids & you'll see that. Now after a few months & a few updates later I decided to revisit my good ole MAV. Now I can't even secure one Target. I have "Realistic TDC" option unticked as usual but can't seem to get my MAV Seeker to slew after pressing my Undesignate button. I'm in the Cyprus map & in a built up area. Is this a current bug or has the procedure changed recently? Any ideas anyone? Kind regards Gaz Update here: Pretty sure I got it now.. when you lock up moving TGT on right DDI with PTRK then switch to left DDI & making MAV Seeker as SOI. You then go back to right DDI & cancel the PTRK & this allows the Undesignate button ( or letter S on KB ) to enable Mav seeker slewing. Phew man, at least it works lol Apologies if this has already been covered, I been kinda AWOL Cheers GA
  5. Thanks big time Ironwulf, I very much hope something can be done about this issue as I've had this on Ground Hog Day repeat in my latest Mission Build for the last 3 months, which has been driving me crazy. My mission was actually finished & ready to be posted about 2 months ago but because of my GBU-12s sticking after the first successful release the mission stalled big time. I was racking my brain trying to find & solve the problem & trying to get a short Track for you guys but it always occurred around the 30 - 35 min mark so that was impossible. I must've flown that mission over 50x & I noticed something else weird that happens, if I went for a AAR & returned to the AO the second GBU-12 would come away from my Plane but not the other 2 & this I found was a common occurrence. I will be posting my mission quite soon in the User Files & with the same Loadout that this issue was happening. Look out for it & download a copy, it's called The Gulf War of Iskenderun & it's quite a big one & also will be posting a preview of what to expect on my YouTube ch ( GazAce ) around the same time. Thanks again for looking into this, I very much appreciate it. Regards GA
  6. Exactly the same issues here with both ATFLIR & LITENING. Thanks for posting
  7. Thanks Gieras brother, I do recall using both bridges as well so obviously the Rail Bridge would cancel out the correct Trigger. I'll just cheat a little & place an Infantrymen under or on the bridge for the Trigger like I said earlier. Thanks again man, will lookout for the fix.
  8. Thanks Gieras, Just tried Rail Bridge on a bare Syria map this past min set in Triggers as Map Object Dead & yes the bridge does collapse but does not trigger any result. Same thing happens with Road Bridges.. partially collapses but no result in Triggers Track File & images submitted from Rail Bridge test RAIL BRIDGE DROP NO RESULT.trk
  9. Does anyone know if this Road Bridge issue is going to be looked at or considered? This is a very real problem for ME tinker type folks like myself. When the Bridge is hit with a 2000 pound bomb or two it partially collapses after burning then doesn't register a hit within Triggers, so no result. Please check this one out ED
  10. Ge Force Driver 466.11 latest vers DCS new update today hopefully will help with these crashes
  11. Over 20 crashes in the last 72 hours.. no mods here. This SIM is virtually unplayable
  12. Ha yea, 2000 pounders sure gonna be fuel taxing but still cant get mine to drop
  13. Hey good folks, seems after 2.7 update Road Bridges cannot be destroyed.. things are now made of Kryptonite. I put 3 x GBU38 into one & it just burned until extinguish, usually one bomb would do the trick. Tested Channel map & Syria Just used a 2000lb GBU-31 on this Bridge in image below & it burns but doesn't collapse. This issue needs looking at please
  14. Yea same here, thank you again man
  15. Hey thanks Oozler but this is my bad, doofus me completely forgot that I changed the mapping to F8 on account of my GeForce recording was set to Alt F9. It works perfectly & looks fantastic & can be viewed anytime from anywhere. Looking fwd to checking this out more in the future. Case closed
  16. Hey good people, apologies if this has been asked & answered before but I would really like to see the LSO in action on my ole Abe Black Pearl SC. Though when I hit Left Alt F9 nothing happens & I checked in controls & it is indeed mapped to that action but wondering how I get this view? Thinking it's only actionable when an AC is landing or.... ?
  17. Yea got it, great to hear Chappy again. Thanks all helpers, much appreciated
  18. Yea thanks Skywarp, looks like it's been pulled, I'm guess copyright stuff. Hey I just found a good one tho called Operation Pontus, got my first Case III in.. busted front gear but still lived lol
  19. Thanks Gierasimov for the tip mate, yea I found it in the manual.. page 117 if anyone's interested reading this post & yes Iron Eagle has been removed, I'm guessing copyright infringement perhaps, who knows
  20. Hey good Pilots, I have already got Iron Eagle campaign modified for F18 but having some issues in the first mission on startup specifically with Nav aligning as the timer counts down incredibly slow or doesn't show at all & I do set my Standby Bara Alt to the correct Airfield elevation. So, I wanted to go back to the user files Campaign to see in the comments if anyone else is experiencing this but I can't seem to locate the Campaign anywhere, all I could find was Iron Eagle 2. Anyone lend a hand with this one?
  21. I don't know what it is but there's just something awesome & exciting about buying a new Campaign here.. Rising Squall & Pontus! Whoo hoo! Lets rock!
  22. Yea I remember all that now, just got distracted testing with this new build & forgot about it. Wish I didn't post this now lol Thanks kindly man
  23. Thanks Tholozor, so the Undesignate button or letter S on kb function is no more yea? ahhh yea that's right, sorry yep, I've been setting up new Rig here & now recall that feature, thanks again cheers
  24. Left DDI is active & AGM-65 MAV has 3 min timed out & is ready for launch & infrared image is all good as is cross hairs. Then Undesignate button is pressed or letter S on your kb for MAV seeker to give ability to slew onto moving target & thus as normal cross hairs collapse around that target & then launch is initiated. I have checked all related mapping controls.. slew Axis is fine as is letter S on keyboard & I have tried in three different maps , three different missions & still I cannot get Undesignate feature to work for MAV F. Sorry if already posted as I did check but couldn't see this report anywhere. I hope can someone also check this & confirm. Cheers thankyou
  25. I appreciate your advice, cheers I've thought about my reply & I was out of line man, so I apologise to you Flappy for being so abrasive & snappy. I was frustrated & pissed off & I won't be coming in Forum anymore to report bugs or problems, I'll just suck it up. It's too unnerving & upsetting & I'm too old for it. Again.. sorry, peace out Thank you, appreciate your tips & advice. GA out Thanks BN, appreciate that mate
×
×
  • Create New...