The_Nephilim

Yes While I am not able to run as high as I stated here I can get a solid 60% rez @90Hz which looks good to me. I am still going to experiment some more but I do believe I am puishing the envelope as much as it can go with this GPU.. I am thinking if I bought the 4080 I could have gotten 70/80% rez.. but this is fine as I would rather run the higher Hz rate as 60Hz is just wierd on the eyes..

Well I had some time to mess with the settings and with QuadViews only I managed to get DCS running @90Hz and 60% rez. I have tried DLSS in the past and did not like it, it seemed to make the image look wierd hard to describe but it did not look good to me.. I mean the performance might be there and I may give it another try. I am doing better then I thought so far with the 4070Ti, I would like to get 70/80% rez @90Hz that would be golden.. but 60% is not too bad and so far the 2 missions I flew init the FPS were fine and did not did below 11.1MS for Frametime.. Thought a couple guys would post the hz rate and resolution in their VR headsets so I could get a better idea where I should be.. As for the 5090 I doubt I am getting one of those it might be a stretch to get a 5080..

yes the PD slider. and I need to reduce something as I am not able to run at 100% rez @90hz. EDIT: OK I tested this a bit more and I am not able to maintain 90Hz at 80%rez. I settled on 60hz again and 100%rez. I guess the 192bit rate kills the 90hz dream.. The QV is still a bit of a bump but not like I thought it was doing. it would be ok and once I flew towards target area the FPS would drop back down to a stutter fest. so I am not able to do 90hz @ 80%, I might be able to swing 50/60% @ 90hz but that is it.. Looking towards he 5xxx series cards..

Hey, I ran a mission last night and when the action started I was getting lousy Frametimes. so I am going to reduce the rez a bit down too .8 in the VR slider. I also made the config file and set it too the defaults will try this out .. I have the tickbox and everything setup to get the QV working.. thnx guys.

Yes I am goingt o go on a marathon DCS run in a minute. but thank you for mentioning this too me as it prompted me to retry it and it worked this time I still can not believe it how good it works.. Yes, I just the other day went back to Win 10 and I am going to stay there as long as I can.. while there was not much difference in gaming FPS wise just that Win 10 was more familiar for me and seemed a bit better.. Thnxagain

OK what gives here, I had tried this in the past and it never made a difference. well I just tried it and was able to run @90Hz with 100% rez in OpenXR and .9 in dcs vr slider.. Now I am unsure why the Quadviews has not worked in the past but WOW, this is literally amazing and how can I run such High rez as I was not able to in the past.. this is like I have a 4090 now.. yes I was thinking1440P rez for the headset but that was an utter failure on my part as it really looked terrible. I was playing in Mechwarrior it was like a very old 320x230 monitor lol!! Thnx for mentioning Quadviews again and I really dont understand why now it is seeming to be working perfect. this is a whole new ballgame for me..

I did ask Google and AI said this: With a 4070Ti, you should be able to comfortably run a G2 headset at 1440p resolution with a refresh rate around 90Hz; depending on the game and settings, you may even be able to push for higher frame rates, but aiming for a consistent 90fps is a good target for a smooth VR experience. I beleive that is about 66% of native rez.. I will try this but I do believe that is about where I ended up last time at least in DCS..

anyone? I did try another experiment and ran OpenXR @ 100% and then reduced the ingame rez with the VR slider to 7. I guess in essance I just reduced the total rez 30%? I guess it would be the same as running at 70% in openXR tool?

Hey Guys, I am not sure but when I run DCS in VR with my setup in sig I run at 90Hz I can only get 40% of the Native resolution.. now while I keep my Frametimes way under 11.1ms I am wondering why I can't seem to get a higher resolution.. What Rez do you guys run at with a simialr config?

well been looking around doe anykind of PV VR Headsets with a displayport. they either are very cheap and not too good or super spendy. I seen 1 headset DPRVR E4 but it seems it is not available and had many issues but it looked pretty cool. I also seen the Somnium VR1 butthat is 2 Grand.. I have a hard enough time trying to get the 1 grand for Pimax Crystal light.. So at this point it seems Pimax is it besides maybe the Vive that came out but it still using Fresnel lenses and I really want to move away from those.. so Pimax seems to be the otnly game in town for now.. will start saving my pennies as I have a year to get some money for a new headset..

I am getting a similar issue with mt Reverb G2 and I am unsure what casues it but it is a recent thing.. I did see in Win 11 they have possitional tracking and it states if I loose tracking the screen will Grey out which it does so maybe it is that new feature I should disable..

Yes, If I reinstall Windows especially if I think something is infected or similar. I Secure NVME Wipe both drives and reflash BIOS incase of a BIOS infection (Call me Paranoid). I figured since both drives might be infected with a new kind of virus or similar I just wipe both drives. so that is why I think I would need 2 drives one to backup the windows drive and the other to image the Game drive.. It really does not take me long to recover at this point. but I am guessing if I imaged the drive right after I had everything installed and disconnected them from the PC if something did happen I could justt reimage both drives.

there is a program called necksafer which might help you out in this instance..

well I would need two SSD for my image of the 2 drives I currently have. 1 is 500gb for the OS and they other is a 2TB for my games which has a little over 1tb used up for my games.. but what is a good free program for the image program?

Yes I do realise this and I have yet to get the drive I needed to do this.. But since I had 2 seperate drives 1 for my Windows and the other for gaming I am not too sure how much time I could save but I guess any little bit of time shaved off would be good.. maybe one day I will buy the drives needed to do this.. but as of today that is not even on the horizon..

Well I could be the sacrificial lamb and update and test this theory on my PC. I reinstall Winxx so many times it would not matter to do it. I have my reinstalls down to a science.. Does it have a HDMI that is connected to the nVidia GPU?? you could get a DP to HDMI Adapter..

so IF I install these older drivers and currently have no issues will I still see an improvemnt in Frametimes and such or will it just baiscally run the same for me? I guess I would need to test it for myself just wondering .. EDIT: I gave it a shot performancve was a little bit worse.. but not too bad only about 1ms in the apache with the tedac running..

yes not many options here really. but if you trim what you really dont use it might help until next year.. wish I had a better solution for you..

delete some planes or terrains or get a bigger SSD GB wise..

are you using other software with the buttkicker?? there are no setting unless you use 3rd party software?

Yes, I guess the writing on the wall should be headed and time to accept WMR is Dead.. I will keep an eye on the Pimax Crystal Light.. the Q3 is of no interest too me for the fact it does not have a DisplayPort Cable.. Thnx all

umm actually it can work with Steam VR but they mentioned mixed reality and I thought they were referring to WMR but it was not.. so it appears they have standalone or their own software to use for PCVR.. I will fix my OP

well someone had a similar issue and I can say that this is normal. do you use openXR?

your welcome. it does the same for me on WMR and OpenXR..

Well I mean it could work if the wired solution is better then wireless. I am not a big fan of the wireless or the usb option either.. I would prefer a Displayport or similar. I may think about it but I am really not too sure about it.. I guess I could use the wired method but it still has issues I fear will not work well with me.. Have you used the wired solution if so is it better then the wireless?