The_Nephilim

Well PD in DCS is at 1.0 and I do run a higher then native for the Rift S in the occulus software. I run it on quality setting which is 1648x1776.. I have run with MSAA x2 so I will try and turn the rez down and the MSAA Off to see what happens.

Yes I do beleieve so but that is what causes it for me. I tried without ASW not sure which is better as I am unable to obtain 80FPS with DCS most times..

I too have a double effect when looking out the sides with a Rift S.. Any solutions here for Occulus.

to find which CPU you have try getting "CPU-Z" by CPUID.. it will give you when you need to know. Hopefully it is a K model Intel but just about any should be good enough.. I ran a G2 with a 1080 GTX vid card and I was fine.

Beats Solo Earmuffs Amazon link

would like to know what you think of it when done.. I did not like the headset not having eramuffs around it in the G2. I did something similar and it sounded so much better..

ahh I watched the entire clip and i needed to move the mouse cursur to get the icon that was blocking the left fps view.. looked good on the new card with those settings..

Hey Nice video but it looks like you have VSync ON?? and I can not see the FPS on the 1080 Left view?

NVM I found the LUA files for the A10C on my Flash drive..

Well they should be fine but what I am wondering is if the Laptop has a HDMI that is directly connected to the video card? I thought I read some laptops will not work with VR??

lighting issue for the cameras in the Quest 2 possibly.

well the max temp for that CPU is 95c so you are pretty hot for just running DCS something might be wrong. I really dont know how much ehat these AMD produce normally but I would think for running DCS 85c is pretty high. Did you build it yourself. One thing could be wrong is either there is no not paste on it it or they did not remove the sticker from the heatsink. https://www.amd.com/en/products/cpu/amd-ryzen-5-5600x

well the SS in Steam VR is probally it. what are you set at rez wise?

I was thinking have you checked for malicous software or miners or similar? does any other game tank that bad?

Hi I was wondering what cooling solution you are using, it looks as if your CPU is being throttled.. perhaps time to do a repaste. have you tyried testing the cpu to see if it being throttled overheating?

you need to run Windows mixed reality for Steam VR and Steam VR with DCS and the G2..

Well that system should run the Rift S and DCS like a dream. Have you checked for miners or adware and such? Also are you Overclocking your CPU? I have a 1080 and the rift works fine with it your 3070 should breeze through it.. Did you set your SuperSampling real high ior something?

Hello, you could post your DCS.log file after DCS Crashes when you press the Win key on WMR Controller.. I would test it but I have an Oculus now but I dont think when I did have WMR Headset that it CTD my DCS?

Well I read what he said there but I am unsure what you are trying to accomplish. another note in that article he said to plug into the Green port, I guess depending on the Soundcard and speaker setup that could be the correct plug but I dont think it is. you need to plug into the ".1" of the 5.1, where .1 is the subwoofer or bass of the system.. the butkicker needs that output. I guess check your Motherboard to see which is the POINT ONE .1 of the system.. Buttkicker explains this in their setup guide, and they give you a double plug for it with the BK Kit. I have a 5.1 system and a VR headset which is USB, like he was saying in that article you use the Main card in my case a soundblaster Z for the Buttkicker and the VR Headset for the sound.. I also EQ'd the sound on the buttkicker to only get the lows and blocked out the Highs in it.. So basically you said it works for you but do you want to ad EQ to the mix or similar? EDIT: I just checked the Green (Lime) is the Front speaker, I checked my Motherboard I only have 3 connectors and not made for qa 5.1 setup cheaper board. But if you have a 5.1 sound built in your motherboard or an addon card that is 5/7.1 you should be good and you I think need to use the Black plug that is the .1 of the 5.1 soundcard which is the bass channel not the FRONTS.

OK I will just post up what I have setup on mine and if you have any question let me know from here: [b]Parts list Software Hardware[/b]: 1. Soundblaster Z - Buttckiker connected to this soundcard. 2. Buttkicker Simulation. Connected to my chair with a fan mod to keep the buttkicker cooler.. I can get pics of this if you want to see it: 3. Voicemeeter banana. used to drive my VR headset and Buttkicker.. 4. Simshaker Payware for DCS.. here is my settings in the Voicemeeter for my setup. Basically you set A1 as a Source and A2 as a source on mine I have this: A1= ASIO Creative SBZ Series ASIO device. (This is an ASIO device becasue that is how I had to set it up in Simshaker which I will show as well pics to follow. A2= Headphone RIFT S. this 2nd device my VR Headset which is USB. you can not get the Buttkicker working with a USB headset without this Voicemeeter or similar software. here is the screenshot of Voicemeeter: Now the settings I use like A1 volume being so high your will be different DON;t Use my settings there for Volume.. here is the Simshaker and what I did to get it working with Voicemeeter and DCS: Note the 6 (5.1) selection which for me uses the ASIO Device. I could not get my setup correctly working with using Mono or 1 Channel.. your setting may be different this is just how I set my Setup which hopefully can giv you an idea on what to do: On the test page I noted the Setting "Good to adjust Volume to max level Sound file TEST.WAV was way to louad for the buttkicker I just selected another sound file and used Loop for test repetitions so I could adjust the Buttkicker volume.. Now that should be it for those 2 programs but if you have any questions let me know.. Also I have a specific startup sequence for my gear as If I do not get the sequence right I will have no sound in the buttkicker.. So here is basically what I do before running DCS: 1. Startup my Joystick Profile. 2. Start Simshaker Aviator. Test Sound module to see if Buttkicker works.. 3. now if you had a WMR Headset you would start that now. so Start WMR and Stema VR. Optional.. 3. Run Voicemeeter (all this was previlously setup on A1 and A2). 4. Test Simshaker again and see if the settings took and your Buttkicker should be thumping now.. 5. Start DCS. All should be working.. Now worth noting what I first set this up I used MONO in Simshaker and when I played DCS I got some artifacts in the sound like digitial bleeps or similar.. I had found out I needed to setup with this config and note your setup may need different settings to get working with your Hardware.. I am just using my setup as an example.. if you qare unable to setup with Voicemeeter Please list your specs like I did noting your Soundcards and where the buttkicker is hooked into.. Rememeber the Buttkicker needs to be plugged into a seperate sound card and using the 2nd VR Herqdset like I did counts as 2 differen t sources.. I found the Buttkicker works best with a Soundblaser card vs the onboard soun d cards and Voicemeeter and Sim shaker Combined.. Hopefully this made sense I tend to leave important details out haha!!

Well I did not see where he mentioned to have better quality bass? I use it because when I use my VR headset which is USB the Buttkicker does not get a signal. Voicemeeter fixes that issue and lets me have the buttkicker on and sound in the headset. With bananna there is a EQ and you can boost the bass and such if that is whaqt you are referring too? IF you would like to use the EQ and such let me know I can show you how I set mine up for use with a VR heqadset and Soundblaster Soundcard with Simshaker and Voicemeeter..

Well if your setup is working now I guess you dont need it. I use it because I use a VR headset and need to run the buttkicker with simshaker. I use a Soundblaster for my Buttkicker which has all the settings I need to use for improved bass. Does your Buttkicker work ok or do you want more bass in it or something?

Yes I use Voice Meeter bannana what do you need help with?

Well I sent it off today and they will be shipping it next day air so hopefully it will not take long to get another back in my hands.

that is not a stock Clock 4.8 is a turbo mode a form of Overclocking.. also this is a DCS forum. but maybe because you are OC you got a random whea error in ME..