silverdevil

great minds think alike if i find an answer, i will share.

thanks for the response. my problem with F16 at least is i barely touch the pedals and the plane jerks to one side or the other depending on which pedal is pressed. but when you get to speed on a roll out the rudder is fine. i am like you and am aware of seat position. it does make a difference. i even have caster brakes on the chair to keep it still. the pedals sit on a carpet square with "male" velcro on the bottom of the pedals to keep them from moving. thanks again for the input.

Hello. Welcome to the DCS: F-16C Viper Section.

Hello All I have been flying F16 from day one release and have always had problems with rudder. The sensitivity of NWS vs rudder is quite different. What are the suggestions for pedals curves? Dead zone needed for NWS? Pedals are MFG Crosswinds. Thanks!

besides the Im going to shoot myself in the foot comment ( ) i agree. i have been with DCS for a while and there has never been anyone from ED making any promises on EA modules. for obvious reasons. it is easy for us to anonymously sit in our cosy game rooms and complain about this and that. also there is nothing in the End-User License Agreement or Terms of service with any mention of EA. so by buying and installing a product, you have agreed to said contracts.

hello again. sorry for the delay. so that area is indeed not modeled for tarmac. i could tell the AC did not roll as well as on runway. there is no marked entrance off the runway either. lastly there is no parking. i checked every available parking spot in mission editor and none fall in the area. i think they house aliens over there

unfortunately in DCS logs, much like windows events, there are always errors in the logs. most of the time i see nothing relevant. i personally and regularly have upwards of 300 errors in my log. for modules that are not even in the mission i am flying. why? i wish i knew. good luck and clear skies.

yeah i figured that too. i thought showing OP what it is supposed to look like, there could could be some self realization what to do. oh well like my dad used to say "try to do right and look what it gets you" you get the win max.

this is an example for what the folder structure is. null the BIN and the BIN-MT folders are populated. the updater is in the BIN folder dir-BIN.txtdir-BIN-MT.txt

hello. i suggest as a test to change from MSAA to TAA Set Preload Radius to max. 30000. Enable Full Screen mode. Disable civil traffic. Consider using TAA instead of MSAA. see if these changes matter. MSAA is a known resource hog.

Hell. Indeed there is no difference in the versions. BETA and Single Thread have been deprecated. Most clean mods and customizations go in DCS folder in saved games. Repair will not replace these files. Main program folders with non default files will be removed during a repair. Last question you had "no bin"? You mean the folder in the DCS folder?

i was stationed in wildflecken in m60 tanks. when we went to border, quite regularly, without a doubt i saw soviet armor on the other side. i think you meant roll over west germany. the fulda gap was purported to have the highest concentration of artillery anywhere in the world at that time.

hello. you should start your own topic. your issues could be caused by something unrelated to the OP's problem. not everyone has the issue and it is probably difficult for ED to troubleshoot "me too" replies. if you post one i will help. upload dcs.log is primary evidence.

glad to help!

there are many ERROR events in your log. i did not count but i estimate over 1000. not all would be an issue because there are always errors in dcs.log. with that said these could be causing the issues. 2024-11-26 17:10:54.734 ERROR EDCORE (Main): Drivers errors while mounting coremods/aircraft/f-15e/liveries/f-15ese/usaf 17th ws af90 low vis clean.zip: 2024-11-26 17:10:54.734 ERROR EDCORE (Main): ZipDriver: Failed to open zip archive coremods/aircraft/f-15e/liveries/f-15ese/usaf 17th ws af90 low vis clean.zip. 2024-11-26 17:10:55.503 ERROR Scripting (Main): declare loadout fail, duplicate not allowed: "{SPRD}" from "./CoreMods/aircraft/MiG-21bis/Entry/Aw", original located here "./CoreMods/aircraft/AircraftWeaponPack/JATOConts.lua" 2024-11-26 17:10:55.723 ERROR EDCORE (Main): Drivers errors while mounting coremods/aircraft/oh-58d/liveries/oh58d/roughmet add text.txt: 2024-11-26 17:10:55.723 ERROR EDCORE (Main): ZipDriver: Failed to open zip archive coremods/aircraft/oh-58d/liveries/oh58d/roughmet add text.txt. 2024-11-26 17:10:59.587 INFO DX11BACKEND (13528): DX11Renderer initialization (w:1025 h:1032 fullscrn:0 vsync:0 adapter:0 monitor:0 shaderErrors:1) 2024-11-26 17:11:03.506 ERROR_ONCE DX11BACKEND (11376): texture 'KevinWakePattern812x1024.dds' not found. Asked from '' seems you have some texture problems and also a weird resolution error you can temporarily disable mods and do a repair. see if that helps. oh-58d is especially known for problems in some systems.

if you are using a DNS name to connect to the server, the accurate IP address needs to point to the DNS name. duh. so yeah it is important. dont ask questions if you dont want help. good luck.

understood. for kicks try different intensity of shadows. and i do not see in this thread that you posted your dcs.log. that may help. PS just saw a post about super carrier secondary shadows are this way (possibly) because it is cheap to render ['shadows'] = 4; ['secondaryShadows'] = 0; probably why i do not have the issue.

i concur with rudel and rob. i only come here to assist users that have issues. some users appear to have more issues than many others for whatever reason. if you stick with it, you are likely to get help and getting fixed. first thing to do is attach your dcs.log. i have personally been at dcs since about 2014 (probably earlier) without any problems to remember.

the global settings will be for every game you play. not all are created equal so to speak. dcs is in a special place. i run a nvida 3090.

yes could be i suppose. possibly the map is not completely loaded. attach your dcs.log for review. maybe something in it will be a clue.

can either of you share what the DNS names are supposed to be? there is a joke in sysadmin arenas "Days Since DNS Problem - 0"

the key with the NCP vs DCS graphics setting are if something says application control, you need to either leave DCS as it is or set the appropriate in DCS. it took me a lonf time to get stuff right. that's also why there is a tab for DCS in NCP. those settings only affect DCS.exe. this is what i have in DCS { ['AA'] = 'DLAA'; ['forestDetailsFactor'] = 1; ['rainDroplets'] = true; ['LensEffects'] = 2; ['box_mouse_cursor'] = false; ['anisotropy'] = 4; ['water'] = 2; ['motionBlurAmount'] = 1; ['BlurFlatShadows'] = 0; ['outputGamma'] = 1.9; ['aspect'] = 2.3888888888889; ['lights'] = 2; ['LODmult'] = 1; ['MSAA'] = 1; ['statsColor'] = { [1] = 250; [2] = 250; [3] = 250; }; ['messagesFontScale'] = 2; ['canopyReflections'] = 1; ['width'] = 3440; ['visibRange'] = 'Extreme'; ['DLSS_PerfQuality'] = 1; ['useDeferredShading'] = 1; ['clutterMaxDistance'] = 0; ['textures'] = 2; ['cockpitGI'] = 0; ['terrainTextures'] = 'max'; ['height'] = 1440; ['multiMonitorSetup'] = '1camera'; ['shadows'] = 4; ['defaultFOV'] = 78; ['shadowTree'] = false; ['chimneySmokeDensity'] = 1; ['secondaryShadows'] = 0; ['SSS'] = 0; ['fullScreen'] = true; ['preloadRadius'] = 50000; ['scaleGui'] = 1; ['Scaling'] = 0.66; ['DOF'] = 0; ['clouds'] = 3; ['sceneryDetailsFactor'] = 1; ['Upscaling'] = 'OFF'; ['Sharpening'] = 0; ['motionBlur'] = 0; ['ColorGradingLUT'] = 0; ['SSLR'] = 0; ['effects'] = 3; ['SSAO'] = 0; ['maxFPS'] = 180; ['sync'] = false; ['heatBlr'] = 0; ['forestDistanceFactor'] = 0.5; ['flatTerrainShadows'] = 0; ['civTraffic'] = ''; ['ScreenshotExt'] = 'jpg'; } with that said, i can see the problems in the screen shots and video you are describing. i haven't noticed it in my case though.

i do not see any problems in graphics setting inside DCS. below are my settings from nvidia. compare them to your settings. the artefact you are talking about is usually AA. but screenshots do not do your observations justice.

heh. i have gotten good at going off the runway with new planes soooo.

i will test. i will probably test with F-16. AV8B is not configured in controls at the moment. i will let you know.