pappavis

would be cool if one could open a TCP port using LUA, then push a stream to the DCS World engine.

This HOWTO demonstrates howto broadcast commercial radio station aka. Radio Mayak in DCSWorld. Tested with the Ka-50. Its per-mission. What you need; * Some mission editor experience. * A tool which can create OGG-vorbis sound files (audacity, for example) Steps; 1. Start Audacity. Create, or convert an appropriate sound file, of say.. 15 minutes playing time, save in OGG-format . 2. Start DCSWorld, choose mission editor. 3. Create a triggerzone 'RadioMayak' of 30km radius around Maykop airbase. 4. Create a once-off trigger '4 mission start' * type=Coalition has aerodrome, aerodrome=Maykop Khanskaya * action=flag 1, value=On 6. Create another Once Trigger, No Event, condition=Flag is true (1), then select Action--> Radio transmission, then choose <<file you created>>, zone='Radio Mayak', value=FM, loop=on, frequency=103400, power=200 5. Add a Pilot flyable Ka-50 taking off from ramp at Maykop. 6. Save the mission. 7. Start the mission, tune radio to 103,400Mhz FM and.. low & behold.. RADIO MAYAK!!! :D:D tested with Ka-50, might work with P-51D with adjustments to LUA-scripts.

Since patch 1.2 the F7 key doesnt work. I am unable to; F7 - AWACS / request picture F7- Wingman / Cover me F7 - ATC - <<F7 airbase number>> Is this common, anyone else experincing this or just me?

SOLVED!! :) :) this worked!! HOWTO; 1. Select DCS Options from the main menu 2. choose the aircraft, such as Su-25T. 3. Select Axis Assign button. 4. Choose the horizontal/vertical slew in the HOTAS Throttle column, then select either joy_x or joy_y. 5. Click OKE 6. FLy a misison and enjoy

In the A-10C one can slew the TGP using the slew-thing on the throttle. I wanna use the same in the Su-26T & Ka-50. Now I use the directional buttons on the Warthog thorttle. Kinda a waste! In DCS options/emnu , there is no axis, or no way to assign this slew. Other suggestions are using Thrustmaster TARGET software . Oke, but, how come the TGP can be slewed using either the keybord or the slew-thingy I think it must be in a .lua file bcs of these in Throttle - HOTAS Warthog.lua, but not sure. {pressed = iCommandPlaneRadarUp, up = iCommandPlaneRadarStop, name = 'HOTAS Slew Up', category = 'HOTAS'}, {pressed = iCommandPlaneRadarDown, up = iCommandPlaneRadarStop, name = 'HOTAS Slew Down', category = 'HOTAS'}, {pressed = iCommandPlaneRadarLeft, up = iCommandPlaneRadarStop, name = 'HOTAS Slew Left', category = 'HOTAS'}, {pressed = iCommandPlaneRadarRight, up = iCommandPlaneRadarStop, name = 'HOTAS Slew Right', category = 'HOTAS'}, The challenge is NOT to use the TARGET software, coz i figure the secret liesis in a LUA/file, somehwere. Any ideas :joystick:?

Ben er ook bij.. I hope to be there too, As my only transport is a BMW motorcycle an alternative is to rent a car, to get my comp from Den Haag to there.

The Bear is, i think 1:72. @pepin1234 Thanks for the tip, will do it on my next model. Yes, its fictional, my attempt at making our 159th´ squad skin failed, as my color mixes of cream grey, creamwhite didnt work out that well, so i repainted the whole in Black, but stuck with the old paint job underneath.

Hi Guys, Recently I bought these models at Vokzalna station in Kiev, Ukraine :D:D. T-frog matched with our 159th-squad skin Yes, the models paintjobs needs improvement ;)

Can anyone help me? Slew doesnt work in neither Ka-50 nor Su-25T. Going into Options, then trying to assign has no effect. ATM the trimmer-button is used fr slewing, whch is a waste. How can I activate slewing for Ka-50/Su-25T?

Serial #: 13676 Location: Lephalale, South Africa Purchased: May 2012

you mean this ==>http://files.digitalcombatsimulator.com/en/206727/

productname=DCSWorld. Latest patch 1.2. Incident; Su-25T AI pilot takeoff ignoring buildings from Guduauta airport. Offline, georgian oilwar campaign, misison name=ATO_04.7. This happened after i jumped cockpit to the AI, then jumped back into my own cockpit. Description; My t-frog was damaged so i landed at Guduauta for repairs. My 2nd wingman AI pilot was off somehwere else, and i called him to Rejoin Formation from far out, which he adhered to. My plane was repaired, rearmed, refuelled and i departed. He was then about 10km from home plate, so i jumped into cockpit (R-Alt+J) landed his plane, asked ground crew for repairs. Meanwhile my own plane piloted by AI was heading to the FEBA. I jumped nearly immediatley (R-Alt+J) into my own plane, then using external views noticed my AI wingman was taking off over uneasy terrain as if it was runway, ignoring buildings and flying through them. this above happened twice more in the same mission.

since when does the frog have (air)brakes? :joystick:. Ohhh, u mean the two slaps of jelly on the wingtips.. didnt notice them giving much brakeing power. With no payload and light fuel those "airbrakes" are near useless. The A-10C is heack of nice, beauty but my LOOOOVE is the T-Toad.

ka-50 talk to ground forces havent bought yet either. The Ka-50 has a capability to talk to army ground forces, using 9 preset channels. Is this Ka-50 capability supported in DCS: CA?

ATM to fly BS2 in DSCSw one needs the full version of BS2, however, an indication on when BS2 Upgrade-version will be supported by DCSW wouls be most welcome.

Yes, there is a small FPS increase. How much FPS, difficult to say. Running the LOFC2 stock Su-25T quickstart mission in DCS:world yields a much smoother framerate. Ground units are much more visible. Gfx in both are at Max settings.

I got the steam fixed version, downloaded & flying :) BUT a full BS2 on steam would be perfect! Is there any `öfficial´ complaint thread on the Steam forums? Not wantingto start the 200th coimplaint thread.

I found the Bezel mangement, but cant manage the middle monitor or #2 as its connected onto the TH2Go box! I wanna change the MIDDLE screen,so that the image area moves <>220pixels to the left! When adjusting the middle bezel it can only move to bezel the right, so the frigging blaack area just gets bigger. WEIRD is * Selecting display of 3840x1080 all oke, no black bezel area, but then my third screen is disabled :( * black area = displysize of 5760x1080. * Switch to a lower res like 4890x900 then there is no black bezel area. * My videocard output#2 is to a 1440x9000 monitor. Any vertical res higher than 900 looks to give a black area. WTF?!?

Today I hookedup a third screen to my Matrox Triplehead2Go Digital. BUT, on monitolr#2 there is a 25% 'black' hole. Also, about the same amount of image is not displayed on monitor#3. When I use the monitor VScaling, its possible to scale left but thats only difference of about 5%. Is it something todo with Bezel, if so how can i change it? Desktop is stretched 5760x1080 Drivers: all the latest, also using Matrox PowerDesk 2.07. Videocard: Nvidia GTX460 Monitors: * 3x 24"LEDs capable of 1920x1080 HD (connected to DVI#1). 1 x 10"touchscreen (connected to output DVI#2) SCREENSHOT --> look the black vertical section on monitor#2.

11 12 13 14 15 16

At 0:07, you sure it wasnt one of her high heels that broke? LOL

Lockon1.0 was a massive major upgrade to Flanker 2.0. And then, came LockOn 1.0 vs LOFC 1.2 is the same engine but incredible advancement, maybe not in Gfx but also to missile modelling, accuracy etc etc. I'd love a FC3 upgrade, perhaphs without funky cockpit shadows.. but, the ability to fly (online) Su-25T alongside the A-10C would be absolutley awesome.

In some situations the Shkval can become damaged or disabled. Is there any way to visually aim the Vikhrs/Kh-25ML?

Additionaly, the friendly airfield must have a refuel & rearm truck stationed there.