majapahit

you're supposed to hover - if even barely - and then land, not slide in. Hover landing you can practice anywhere. The 'flight envelopes' of a Huey a. >80 knts stay altitude b. 80 knts stay on altitude cruise c. 60-20 knts descending @ -500 f/min d. 20 knt anticipate 'sink', anticipate yaw e. 10 feet come to 0 knt hover with pitch, chk yaw d. 5ft come to 0 knt hover horizontal chk yaw e. touch down with minimal descent rate. Read the manual, carefully, copter aerodynamics. 2 cts

I had to use 'custom' as the DCS version and path to get it working (and as admin)

You stand up from you chair

Happened to me You have to run KBB as administrator

No 'Default Profile' to resize? New to Kneeboard builder (EDIT: had to run 'administrator'

+

noticed "external cargo safety" twice with error notifier in 'UH-1H Sim' binding setup I searched the input .lua's and cannot find a double, so there must a a typo in the keyboard vs the joystick <default.lua> ? can't see what the error might be though ?

put the gain down

return and replace ? The Rift connection cable also plugs into the goggles side. Find a YT that shows how to unclick the foam holder from the Rift, unplug the cable from the goggles (clean with air or alcohol, maybe), re-plug in, test. ?

yep, that would be next plan, test with just 1 video card. This would point to, 1. DCS incompatibility with hardware setup, 2. driver issue, which is about the same problem, 3. DCS/VR rendering problem, which last would lead to a. repair/uninstall/reinstall Oculus software b. how I optimize FPS is easing the work VR has to do, so in NVidia driver setup, 'texture quality'<> "performance", MSAA OFF, FXAA OFF, VIRTUAL REALITY pre-renderframes "4" (<<< !), Optimization OFF Antialias <> Application Anisotropic <> Application in DCS MSAA OFF OR TRY lowest 2x (Sometimes OFF makes things worse) SSAA OFF in DCS VR Tab Pixel density "1" Custom IPD nope etc and see of stutters are gone, the picture will look washed out horrible but if no stutters you can then dial things back in Oh and try Oculus Tray Tool which runs parallel to Oculus software and sets Supersampling AA and "ASW" per game title, and is another pain in the neck to figure out, just to smoothen the Rift output I for instance dial in Texture filtering quality for DCS to "performance" which is an idiot choice and then dial Oculus Tray Tool Supersampling to max 2.5, which is an insane choice VIRTUAL REALITY pre-renderframes "4" which is weird DCS VR Pixel density to 1.6, which is weird because this should be the same as Oculus Tray Tool SS, but this works, reasonable sharpness, smooth. What happens is with 'Texture filtering quality' to "performance", this more than halves the texture size and thus rendering work, and then these smaller textures I then Max out with supersampling of he Tray Tool and then DCS. How weird is that. Oculus updates on their software are also sometimes quite drastic and keep up with that, my Sensors work a lot better since the last update for instance, this VR stuff is just all too new. With other VR titles then again, everything standard works fine.

MAYBE brother has a bad install. Option 3 I sometimes - rarely - have to delete the install and start over. Option 2 'repair' the install "X:\DCS\bin\DCS_updater.exe -repair" Option 1 delete 'saved games' directory, will be rebuild, lose all settings Option 0 repair the shaders in the 'saved games' directory, delete 'fxo' & 'metashaders2' directory, these will be rebuild in 1st new start of DCS in reverse order 2 cts

Which is an indication for a repair of your 'saved games' directory, or b. simply backup your old and start a fresh 'saved game' directory which generates all (new and up to date) key bindings ..

the 'wing fold' result in my HTML generation: "RShift - O" Wing Fold Control Handle - CCW/Left Right Vertical Panel "RCtrl - O" Wing Fold Control Handle - CW/Right Right Vertical Panel Wing Fold Control Handle - FOLD Right Vertical Panel Wing Fold Control Handle - FOLD/HOLD Special For Joystick; Right Vertical Panel Wing Fold Control Handle - HOLD Right Vertical Panel Wing Fold Control Handle - PULL Right Vertical Panel "O" Wing Fold Control Handle - PULL/STOW Right Vertical Panel Wing Fold Control Handle - SPREAD Right Vertical Panel Wing Fold Control Handle - SPREAD/HOLD Special For Joystick; Right Vertical Panel Wing Fold Control Handle - STOW Right Vertical Panel both left and right and that seems to be default the functions that seem duplicates one has to ask DCS, don't need, haven't tried

Here a pic of my VA

Indeed ^^ when you hit the deck, immediately full throttle (or military if you're like me and military is 'good enough') no breaks. No engine power will have the wire pull you backwards and thus your nose wheel up if you're on the brakes and even if you are not.

'Tap' high gain, I give quite the dot of throttle an immediately back off as soon as I move, and then 'tap' my way to the catapult. In case of after trap, after raising hook, first thing to immediately do is 'wings fold' (a Voiceattack macro command in my case) and HI gain locks and makes for very easy taxiing (without hitting anything also and start a bloody fire)

When your Enter key works but your set TDC not, you've set up something backwards. Why have you 'realistic TDC unchecked' whilst your method seems the realistic way is my first thought? You do have sensor focus first?

And check alt-tab with task manager 'performance' if not a windows background task kicks in (like indexing, defragmenting, updating) check disk read writes etc.

I gave my 2cts the other day on a DCS Facebook fan page. It does make 'sense' to go for the highest specs, when you're doing, have to do, your upgrade 'cycle' anyway. My one but last build was rather satisfying and I kept it for many years but at a certain point when your motherboard's soundcard fails and the sleep function stops working, it's just time to send these to the bin. That's when you do your research of the up-to-date performance/price stats. You then buy the fastest stuff around you can afford because you have to get new stuff. 2 more cts.

Haven't tried the new A10C method, my TMWH works fine with push&slew, also with the latest updates, all TMWH appear not to be equal.

Remove the foam frame, is what I did, my eyes need more than 7.0 distance, without the foam frame (search YT mod its simply unclick) your eyes get nearer to the lenses., and I filled this up with tweaking a piece of foam to get it right, solved my issues. My eyes are -2

I use a target script that loads 120 DX on/off states for every switch, so the definitions can all be done in the DCS controls. It's couple of replies here above, attached.

FYI, I noticed an update link in this weekend's DCS sale news. My TMWH push&slew was one of those that already worked, but today, I think DCS tweaked the snap circle a tad bigger, and snap a tad faster, which is great fun. Now smooth and almighty quick, those ground targets can be locked in sequence like never before ..

If you switch on the control indicator you can see exactly what the FCS does, and yes it trims when you hard bank left clean, and it keeps trimming when dirtying up.

2018 gave problems in my setup. These 2018 are specifically made for the new rudder pedals. Which I don't have. 2017 are the same for TMWH only. This is about throttle firmware I suggest somebody might want to check if that possibly is the culprit for the SC not working. I don't know, mine works. The 'Update Service' gives an online check of the firmware status, not about any drivers. I suggest DCS might want to check this, would save some work maybe.