emenance

What are the instructions to remove this mod if it causes trouble. I have come back with some time for flying and not up on current modding procedures. Thanks looks great!

Hi I primarily fly the SU27 and the SU33. Am looking for missions for them. I still like to have fun with the KA50 too. Or I might dedicate all of my time to finally get into the F15 on a serious basis. What do you all suggest ?

http://forums.logitech.com/t5/PC-Gam...le/td-p/542496 There are adjustment in the the thing to help with the slop now and before the last firmware update. TRY THIS No more slop for me g940 hotas http://forums.eagle.ru/showthread.ph...highlight=g940 G940 A guide http://forums.eagle.ru/showthread.php?t=45695 The following was posted here before the Dec 2010 Firmware update G940 firmware 1.42 is now available Options 12-21-2010 04:04 PM ok, 6 hours of experiments, the result: a very strange looking setup, but working extremely well. check the ingame cockpit stick responding 1:1 to your input. Logitech Profiler settings Stick: X and Y Axis Properties Sensitivity 0% Dead Zone 0% Range 30% !!! Specific Game Settings Overall Effects Strength 100% Spring Effects Strength 50% Damper Effects Strength 50% Centering Spring 0% unchecked don't forget to unplug and replug the usb connection of the G940, to make shure the new settings are applied. DCS Black Shark Axis Tune Panel Deadzone 0 Saturation y and X 100 Curvature -100 !!! Force Feedback Tune Panel Trimmer Force 100 Shake 0 before starting to fly, quickly unpause and pause the game, then move all inputs (throttle, pedals, stick) to the maximum and minimum to make shure BS gets the calibration of all the inputs. Alec Delorean is offline Add to Alec Delorean's Hey thats a really nice setting. I like that one even better. I had to turn down the overall effects strength to 75 because it was a little too stiff for me at 100 but every thing else is real nice. Good job on that find. Rep up +1.

http://www.pcper.com/hwlb

If you want headphones for all ranges in audio....not just dr dre hip hop. Then get these http://www.motorheadphones.com/en Made to perform on all the ranges. Esp if you dont listen to bass filled hip hop

its a 10c diff than what you would consider normal. Everyone knows that this sim is hard on hardware. Your overthinking it and I wouldn't think about anymore if I were you and that was my set up.

G940 Setup for Flight Sim X http://forums.logitech.com/t5/PC-Gaming/Logitech-Flight-system-G940-How-to-set-it-up-Tutorial/td-p/702946

I have followed the system close since launch. No one ANYWHERE has ever went through adding a spring. We all just complain about it and nothing got done besides the new firmware1.42 that tightened it up alot. http://forums.logitech.com/t5/PC-Gaming/G940-firmware-1-42-is-now-available/td-p/542496 There are adjustment in the the thing to help with the slop now and before the last firmware update. TRY THIS No more slop for me g940 hotas http://forums.eagle.ru/showthread.php?t=55833&highlight=g940 G940 A guide http://forums.eagle.ru/showthread.php?t=45695 The following was posted here before the Dec 2010 Firmware update G940 firmware 1.42 is now available Options 12-21-2010 04:04 PM ok, 6 hours of experiments, the result: a very strange looking setup, but working extremely well. check the ingame cockpit stick responding 1:1 to your input. Logitech Profiler settings Stick: X and Y Axis Properties Sensitivity 0% Dead Zone 0% Range 30% !!! Specific Game Settings Overall Effects Strength 100% Spring Effects Strength 50% Damper Effects Strength 50% Centering Spring 0% unchecked don't forget to unplug and replug the usb connection of the G940, to make shure the new settings are applied. DCS Black Shark Axis Tune Panel Deadzone 0 Saturation y and X 100 Curvature -100 !!! Force Feedback Tune Panel Trimmer Force 100 Shake 0 before starting to fly, quickly unpause and pause the game, then move all inputs (throttle, pedals, stick) to the maximum and minimum to make shure BS gets the calibration of all the inputs. Alec Delorean is offline Add to Alec Delorean's Hey thats a really nice setting. I like that one even better. I had to turn down the overall effects strength to 75 because it was a little too stiff for me at 100 but every thing else is real nice. Good job on that find. Rep up +1.

G940 is not the best but workable if you got a good one and can remove a screw in the throttle. Someday tighten some wire connections in the pedals. WOOPPPPPTEEE DOOOOO HAHA couldn't resist! Not the best solution but works for many.

Curious if there is progress on this problem.

Id like to get in with the Su27 But My stick isnt working with FC3 right now.

Id like to buy a FFB CH Stick someday.

think next New Year and maybe only maybe do it? In a year it might be worth going windows 8 with some touch monitors around you for fun.

id uninstall fc 2 and dl it again and try to reinstall it. Or just remove it. All you need is the first lock on for FC3. The repair button is in the gui last picture I seen. Soon as you start it up?

DCS World and FC3 do not work with my controller so id like to reverse the purchase. Unless im given reason not to.

I have been on Logitech Keyboards for longer than I can remember , over ten years. All SOLID. The current G15 works for me since forever it seems like.. over five years.

I have to disagree. Logitech Mice are some of the most popular, solid products on the planet. The G940 had its problems but it does work for alot of people. The mods and lengths and troubles people have gone through to make it more precise is no less than jaw dropping. Until Thrustmaster or ( the world ) can make a more reliable system for a reasonable cost. I think that even three years later the G940 is worth considering using until you can graduate to the superior Thustmaster Stick and a siatek pedal set up.

Texture template of F-15C model Layered PSD texture template of F-15C model I noticed these photshop PSD files in the download section. I see there are no instructions or information listed for this downloads. What exactly are they and if they are just ultra fine pics for the plane how do we install them in the game.

Thanks for post, i missed it too! mine still works good as I need it to. Its not a bad setup and many people still use it and works good enough for them.

I watched the dates on a couple boxs of these. They were made in a big run and then production stopped. China filled the order and then prayed for sales. Toaster ovens can be made in china and sit in warehouses for years before they are sold out. Typical practice in china.

g940 is not working right in DCS World yet, FC3.

Loaded FC3 and G940 trottle will not assign axis. I hear the g940 needs fixed in here. I hope soon.

Thanks for info. I just installed FC3 and found no updated info for it or no profile to input. I hope they figure it out soon. I want to play FC3. Thanks again .

I think I need help with this. First of all I have it set up alright in FC2 and Black Shark. I have the A10 but dont play it. Not enough time. Anyway, when i go into options to check the Axis the throttle joy and pedals are set to Joy Z If I try to change when working throttle I get joy x or joy y ONLY. Still not sure why I cant change throttle in the game control area ? NOTE: Only 25T is active in DCS World. I own BS2 Patched, FC2 Patched and A10c and none are available through DCS Gui . But I understand that doesn't matter or make much diff.

I have the same problem with DCS World I think I need help with this. First of all I have it set up alright in FC2 and Black Shark. I have the A10 but dont play it. Not enough time. Anyway, when i go into options to check the Axis the throttle joy and pedals are set to Joy Z If I try to change when working throttle I get joy x or joy y ONLY. Very strange. What am I doing wrong? Im a little rusty and have forgotten somethings. Is there not a profile for the Logitech software to grab or something. I noticed that it deems the software isnt populating a basic arrangement of assignments. Still not sure why I cant change throttle in the game control area ?