Raz_Specter Posted August 4, 2017 Share Posted August 4, 2017 (edited) The British Fighting Vehicle Group are proud to present to the DCS community: WWII Ground Equipment Pack. Download: IC compatible: Saved Games Version: Download This Pack is Comprised of: - WWII Airfield Tractor - WWII Airfield Tractor pulling Type-C Bomb Trolly with Bombs - WWII Airfield Tractor pulling Type-C Bomb Trolly with HVAR Rockets - WWII Accumulator Trolly (For the Spitfire) - WWII WMC Re-Fuel Truck - WWII RAF Road Block with Sand bags - WWII British Army Road Block with Sand bags - WWII Fuel Barrel (single) and Group of - WWII Maintenance Ladders - WWII Bararge balloon both LAND and NAVAL (Heights: High = 4600ft, Medium= 2500ft, Low = 1200ft) also included a Ground (ready to deploy Balloon also) Balloons are fully collidable including wires. All models are fully interactive and drivable with full Damage Models and PBR textures which work in both 1.5.7 and 2.1. Installation Instructions: Saved Games install: Download the rar (EXTRACT USING THE LATEST VERSION OF WINRAR TO AVOID PROBLEMS) Extract the folder WW2 Airfield Equipment BFVG into C:\Users\<your username>\Saved Games\<DCS Version>\Mods\tech Done We hope you enjoy encompassing this pack into your missions and hope it brings more immersive scenarios Many thanks Mithandra (Call Sign: Specter) Suntsag (Call Sign: Naked) Edited August 6, 2017 by Raz_Specter Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
EL_LEJI Posted August 4, 2017 Share Posted August 4, 2017 Great!!! Thank you so much :thumbup: http://www.cruzdesanandres.com/ My skins Windows 10 Pro -Asus rog strix z490-e gaming - I7 10700K - Ram Corsair 32 GB 3600 - Samsung 970 evo plus 1tb - RTX 4070TI 12Gb - Gigabyte G32QC 2560 x 1440 (QHD)- Thrustmaster HOTAS Warthog -TPR: Thrustmaster Pendular Rudder - Track IR 5 - VR samsung odyssey plus Link to comment Share on other sites More sharing options...
uboats Posted August 4, 2017 Share Posted August 4, 2017 Looks nice! Sent from my iPhone using Tapatalk [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn | Link to comment Share on other sites More sharing options...
rogonaut Posted August 4, 2017 Share Posted August 4, 2017 high quality, keep them coming :) Link to comment Share on other sites More sharing options...
Esac_mirmidon Posted August 4, 2017 Share Posted August 4, 2017 Brilliant !!! " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4 Link to comment Share on other sites More sharing options...
Hawkeye60 Posted August 4, 2017 Share Posted August 4, 2017 Thank you very much! Outstanding work! Bravo! "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
maks Posted August 6, 2017 Share Posted August 6, 2017 hi there , i followed the installation info , but they dont show up in the ME? is there a reported problem ? thanks for help brgds maks Link to comment Share on other sites More sharing options...
Einauge Posted August 6, 2017 Share Posted August 6, 2017 hi there , i followed the installation info , but they dont show up in the ME? is there a reported problem ? thanks for help brgds maks yep...i have the same problem.:cry: Link to comment Share on other sites More sharing options...
Raz_Specter Posted August 6, 2017 Author Share Posted August 6, 2017 (edited) hi there , i followed the installation info , but they dont show up in the ME? is there a reported problem ? thanks for help brgds maks Hi maks no reported problems at all so the steps are - download the rar file open it with the latest winrar you should see something like SCREEN1 Locate your folder within C:\Users\Specter\Saved Games\DCS.openalpha\Mods\tech Normally you will have to create the Mods folder and within the Mods folder create a folder called tech now go into the tech folder and drag from the winrar window the folder called WW2 Airfield Equipment BFVG so what you should have when finished is the following C:\Users\Specter\Saved Games\DCS.openalpha\Mods\tech\WW2 Airfield Equipment BFVG under the last folder (WW2 Airfield Equipment BFVG) you should see LUA files and several directories *NOTE* in this example i am using DCS.openalpha, if using either live or OB then the directories will be either DCS or DCS.openbeta See SCREEN2 for the completed view Hope that helps Cheers Specter Edited August 6, 2017 by Raz_Specter Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
Einauge Posted August 6, 2017 Share Posted August 6, 2017 Here is my experience. First i read your instructions. Then i.... 1. downloaded and installed newest winrar 2. repaired DCS 2 installation for a clean start. 3. downloaded and installed your mod pack in my saved game folder. "C:\Users\myname\Saved Games\DCS.openalpha\Mods\tech\WW2 Airfield Equipment BFVG" 4. deactivated all other mods. Your Mod was the only active mod. 5. start DCS2 and start mission editor. After 5 min. waiting time i killed dcs2 process with the task manager. 6. deactived your mod. DCS2 is now without mods. Starting again and start mission editor. Waiting time 11s. ok shit happend.Appearently your mod will not starting on my system. However it´s a very good design and work. Link to comment Share on other sites More sharing options...
maks Posted August 6, 2017 Share Posted August 6, 2017 Well it seems mine system does also not accept it? Did follow correctly but no succes , have other mods in this dir e.g. Animals mod, and they work? Strange:music_whistling: Link to comment Share on other sites More sharing options...
Raz_Specter Posted August 6, 2017 Author Share Posted August 6, 2017 yeah very strange as everyone in our squad tested the release and many others have reported the mod is working perfectly so you are running the latest version of the sim? also check in the RAF Airfield Equipment BFVG folder there is a PDF which explains where in the mission editor all the mods can be found Not sure what else to suggest to be honest Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
heinzknocke Posted August 6, 2017 Share Posted August 6, 2017 Fantastic mod looks good testing out different things at the moment. Would it be possible for some static ww2 aircraft to go along with this ? Heinz Link to comment Share on other sites More sharing options...
uscstaylor Posted August 6, 2017 Share Posted August 6, 2017 Beautiful work Guys Link to comment Share on other sites More sharing options...
Einauge Posted August 7, 2017 Share Posted August 7, 2017 i give it a second try. Complete desinstallation of dcs2 and the save game file. Deleted every trace of the game. Complete new installation of dcs....and voila...same result. DCS hang up when Missioneditor starts. It should not be. Link to comment Share on other sites More sharing options...
REDEYE_CVW-66 Posted August 7, 2017 Share Posted August 7, 2017 Great work guys! Link to comment Share on other sites More sharing options...
SUNTSAG Posted August 7, 2017 Share Posted August 7, 2017 i give it a second try. Complete desinstallation of dcs2 and the save game file. Deleted every trace of the game. Complete new installation of dcs....and voila...same result. DCS hang up when Missioneditor starts. It should not be. Hi Einauge, We have never seen this issue occur with any of our Mods, as we thoroughly test them prior to release. However this does not mean that there is the possibility of the odd exception. In order to help you could you please post images of your saved games folder and paths for Mods? We can take a look and eliminate any obvious issues that may appear to us. We are happy to help where we can. Cheers. :thumbup: Callsign: NAKED My YouTube Channel [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Fureball Posted August 14, 2017 Share Posted August 14, 2017 Hello Einauge,,,, had this problem too... try to install ALL BFGV MODS PACK 1 2 3... AND WW2 at last... then it will be okay... ^^ Link to comment Share on other sites More sharing options...
Raz_Specter Posted August 17, 2017 Author Share Posted August 17, 2017 hmmm, Fureball, thanks for the info, i will this when i am back from holiday, to be fair i have never tested this without the other mods installed. I am back from holiday on Sunday late so will be next week if thats ok Cheers Specter Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
Fureball Posted August 17, 2017 Share Posted August 17, 2017 Well i wish a nice vacation..., ^^ At least on my rig it behaves that way... By the way your mods are sublime... Nice work !!! Link to comment Share on other sites More sharing options...
=Pedro= Posted December 3, 2017 Share Posted December 3, 2017 Awesome work Sir! :thumbup: Gigabyte Z390 Gaming X | i7 9700K@5.0GHz | Asus TUF OC RTX 4090 | 32GB DDR4@3200MHz | HP Reverb G2 | TrackIR 5 | TM Warthog HOTAS | MFG Croswinds Link to comment Share on other sites More sharing options...
fox2bravo Posted December 27, 2017 Share Posted December 27, 2017 After the last update I'm unable to load a mission created with this mod. A pop up message tells me that I need the module installed. Well I have it installed in the file structure as showed in a post here, it even shows up in the module manager. I haven't had any problems related to this before. Maybe there are some new file structure from ED? I have also all other mod from you installed, and no one are working now. Nothing of your equipment are showing up in the drop down list in ME Link to comment Share on other sites More sharing options...
rjetster1 Posted December 27, 2017 Share Posted December 27, 2017 Great job! Link to comment Share on other sites More sharing options...
SUNTSAG Posted December 27, 2017 Share Posted December 27, 2017 After the last update I'm unable to load a mission created with this mod. A pop up message tells me that I need the module installed. Well I have it installed in the file structure as showed in a post here, it even shows up in the module manager. I haven't had any problems related to this before. Maybe there are some new file structure from ED? I have also all other mod from you installed, and no one are working now. Nothing of your equipment are showing up in the drop down list in ME I'm sorry to hear that fox2bravo and I have tested the mod in both 1.5 OB and 2.2 OA with no issues please see images below. It could be your saved games folder has been changed in some way which is usually the cause of issues like this. Please try a new install of the Mod in the saved games folder and let me know if that works. Cheers. Great job! Thanks riejester1 we always appreciate feedback :thumbup: Callsign: NAKED My YouTube Channel [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
fox2bravo Posted December 27, 2017 Share Posted December 27, 2017 I sorted it out:), I had the mods also in the C:\DCS 1.5\Mods\tech folder. Removed them from that location and just kept them in the C:\Users\<your username>\Saved Games\<DCS Version>\Mods\tech. Thanks, and by the way, fabolous work, keep them coming:thumbup: Link to comment Share on other sites More sharing options...
Recommended Posts