ACEL Posted July 29, 2018 Share Posted July 29, 2018 (edited) In DCS settings: The resolution corresponds to the size of both monitors? => 3286x1080? Nope in dcs I have still 1920*1080, but if I set the resolution to 3286x1080, the main screen extends and I cant see the right half, even if the center point starts ar x0 y0 Edited July 29, 2018 by ACEL 11TSG - www.11tsg.com -- Acel-Sim FB Page -- Acel-Sim in Reddit -- Acel-Sim Discord Channel Link to comment Share on other sites More sharing options...
ddanoismac.com Posted July 29, 2018 Share Posted July 29, 2018 I know this has previously been discussed here before but I've tried the suggestions earlier in the thread but I can't get the Left & Right MFCD to be clear and readable in the exports (please see pics). Has anyone resolved this issue with the new update? BTW, I am using the Cpt Zeen profile files downloaded as of today July 29th. Thanks in advance, Derek Link to comment Share on other sites More sharing options...
RightStuff Posted July 29, 2018 Share Posted July 29, 2018 (edited) Nope in dcs I have still 1920*1080, but if I set the resolution to 3286x1080, the main screen extends and I cant see the right half, even if the center point starts ar x0 y0 The x-resolution has(!) to be the sum of both monitors. Just to get sure: Fullscreen is off? Edited July 29, 2018 by RightStuff Link to comment Share on other sites More sharing options...
MustangSally Posted July 30, 2018 Share Posted July 30, 2018 (edited) Check the following points.... Correctly setup monitors in windows preferably side by side with the primary on the left. DCS options should be Fullscreen unchecked (due to different resolutions) Ensure you have selected the correct monitor config in DCS options Monitor res in DCS options must be 3286x1080 <- this is why you aren't seeing the exports Ensure that your export.lua and helios folder are correctly installed....I see that you have from a previous reply. For example, my configuration... I have 2 monitors - Prim is 2560 x 1440 and secondary 1920 x 1080. Setup side by side in Windows 10 My resolution in DCS is 4480 x 1440 Fullscreen unchecked My monitor config... _ = function(p) return p; end; name = _('2_monitors_FA18C'); Description = 'Right, Left, RWR, IFEI, UFC, and AMPCD in right monitor' --TOTAL DEL VIEWPORT Viewports = { Center = { x = 0; y = 0; width = 2560; height = 1440; viewDx = 0; viewDy = 0; aspect = 16/9; } } --LEFT LEFT_MFCD = { x = 2842; y = 200; width = 389; height = 373; } --RIGHT RIGHT_MFCD = { x = 3821; y = 200; width = 389; height = 373; } -- RWR F18_RWR = { x = 4070; y = 734; width = 183; height = 183; } --AMPCD F18_AMPCD = { x = 3340; y = 690; width = 362; height = 352; } --UFC F18_UFC = { x = 3300; y = 27; width = 461; height = 263; } --IFEI F18_IFEI = { x = 2717; y = 754; width = 524; height = 203; } UIMainView = Viewports.Center Edited July 30, 2018 by MustangSally Ryzen 9 7950X3D - MSI MAG X670E TomaHawk MB, ASUS ROG Ryujin III 360 AIO 64gig Corsair DDR5@6000, Gigabyte GeForce RTX 4090 AORUS Winwing Super Taurus, Orion2, TO / Combat panels, Collective with Topgun MIP Winwing Skywalker pedals, NLR Boeing Mil Edition Simpit, Trackir Link to comment Share on other sites More sharing options...
MustangSally Posted July 30, 2018 Share Posted July 30, 2018 I know this has previously been discussed here before but I've tried the suggestions earlier in the thread but I can't get the Left & Right MFCD to be clear and readable in the exports (please see pics). Has anyone resolved this issue with the new update? BTW, I am using the Cpt Zeen profile files downloaded as of today July 29th. Thanks in advance, Derek Here....https://forums.eagle.ru/showpost.php?p=3555460&postcount=117 Ryzen 9 7950X3D - MSI MAG X670E TomaHawk MB, ASUS ROG Ryujin III 360 AIO 64gig Corsair DDR5@6000, Gigabyte GeForce RTX 4090 AORUS Winwing Super Taurus, Orion2, TO / Combat panels, Collective with Topgun MIP Winwing Skywalker pedals, NLR Boeing Mil Edition Simpit, Trackir Link to comment Share on other sites More sharing options...
Capt Zeen Posted July 30, 2018 Author Share Posted July 30, 2018 Added a Troubleshooting section on the first post. Check there, first, if you got problems ! Probably there is your solution. .. Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel Link to comment Share on other sites More sharing options...
Tomcat Posted July 30, 2018 Share Posted July 30, 2018 Hi Capt Zeen İ have solved all of my problems about your profilo F-18. But unreadable thik lines. when i changed trues and falses to eachother it dont help. Has anyone solved that problem ? Thank you. Link to comment Share on other sites More sharing options...
MustangSally Posted July 30, 2018 Share Posted July 30, 2018 Hi Capt Zeen İ have solved all of my problems about your profilo F-18. But unreadable thik lines. when i changed trues and falses to eachother it dont help. Has anyone solved that problem ? Thank you. Read 2 posts up! Ryzen 9 7950X3D - MSI MAG X670E TomaHawk MB, ASUS ROG Ryujin III 360 AIO 64gig Corsair DDR5@6000, Gigabyte GeForce RTX 4090 AORUS Winwing Super Taurus, Orion2, TO / Combat panels, Collective with Topgun MIP Winwing Skywalker pedals, NLR Boeing Mil Edition Simpit, Trackir Link to comment Share on other sites More sharing options...
capthaltli Posted July 31, 2018 Share Posted July 31, 2018 Read the troubleshooting and am getting this in my export.log 09:53:00:616 : File Path: 09:53:00:616 : Unknown Module Name: FA-18C_hornet 09:54:54:050 : ====== Logfile close ====== Thoughts? [sIGPIC] "GOONIE" [/sIGPIC] "GOONIE" CSG-1 VFA-25 Link to comment Share on other sites More sharing options...
Beamscanner Posted August 1, 2018 Share Posted August 1, 2018 Here....https://forums.eagle.ru/showpost.php?p=3555460&postcount=117 Degrading the quality of the in-game displays to fix the exported displays is not an adequate solution. The more people keep saying that this is a solution, the further down the list this bug gets and the longer it'll take ED to address this issue. Link to comment Share on other sites More sharing options...
MustangSally Posted August 1, 2018 Share Posted August 1, 2018 Degrading the quality of the in-game displays to fix the exported displays is not an adequate solution. The more people keep saying that this is a solution, the further down the list this bug gets and the longer it'll take ED to address this issue. Hmmmm, I use it and it's fine on my ingame as well as exported displays! Ryzen 9 7950X3D - MSI MAG X670E TomaHawk MB, ASUS ROG Ryujin III 360 AIO 64gig Corsair DDR5@6000, Gigabyte GeForce RTX 4090 AORUS Winwing Super Taurus, Orion2, TO / Combat panels, Collective with Topgun MIP Winwing Skywalker pedals, NLR Boeing Mil Edition Simpit, Trackir Link to comment Share on other sites More sharing options...
flyco Posted August 1, 2018 Share Posted August 1, 2018 Thanks a million for the FA-18 Helios set-up. It is great. I have one observation/question. The Hook ByPass switch (Field/Carrier) is a momentary one - I have replaced it with an On/On switch. I understand the advantage of a momentary switch for the Launch Bar switch, but I am left wondering if the Bypass switch was an error. Forgive my temerity in asking. Link to comment Share on other sites More sharing options...
Capt Zeen Posted August 1, 2018 Author Share Posted August 1, 2018 Thanks a million for the FA-18 Helios set-up. It is great. I have one observation/question. The Hook ByPass switch (Field/Carrier) is a momentary one - I have replaced it with an On/On switch. I understand the advantage of a momentary switch for the Launch Bar switch, but I am left wondering if the Bypass switch was an error. Forgive my temerity in asking. Well, probably was a mistake, but easy to fix. Now i am flying with the Hornet, so i can revise everything. Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel Link to comment Share on other sites More sharing options...
ddanoismac.com Posted August 2, 2018 Share Posted August 2, 2018 Here....https://forums.eagle.ru/showpost.php?p=3555460&postcount=117 Many thanks! Link to comment Share on other sites More sharing options...
sobe Posted August 2, 2018 Share Posted August 2, 2018 Capt Z Please check the radar altimeter on the right vertical panel. It does not seem to move when I twist the round dial. Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 . Link to comment Share on other sites More sharing options...
Womb_Raider Posted August 2, 2018 Share Posted August 2, 2018 Any way to fix the fuzzy or faint DDI text? There is no in between. Intel I9 9900K, Asus Prime Z390-P, 32 GB GDDR4, GeForce RTX 2080, 1TB Samsung SDD, TM WartHog, Oculus Rift/TrackIR 5 Products: FC3/F-5/F-16/F-18/F-14/Persian Gulf/Nevada Link to comment Share on other sites More sharing options...
MustangSally Posted August 2, 2018 Share Posted August 2, 2018 Any way to fix the fuzzy or faint DDI text? There is no in between. Read the first post and also go back one page! Ryzen 9 7950X3D - MSI MAG X670E TomaHawk MB, ASUS ROG Ryujin III 360 AIO 64gig Corsair DDR5@6000, Gigabyte GeForce RTX 4090 AORUS Winwing Super Taurus, Orion2, TO / Combat panels, Collective with Topgun MIP Winwing Skywalker pedals, NLR Boeing Mil Edition Simpit, Trackir Link to comment Share on other sites More sharing options...
Tomcat Posted August 3, 2018 Share Posted August 3, 2018 Hallo again İ've done at last Than after last update my UFC RWR and IFEI gone forever. Any tiny clue?? Thanx Link to comment Share on other sites More sharing options...
MustangSally Posted August 3, 2018 Share Posted August 3, 2018 Hallo again İ've done at last Than after last update my UFC RWR and IFEI gone forever. Any tiny clue?? Thanx There is a trouble shooting guide on page one of this thread. Ryzen 9 7950X3D - MSI MAG X670E TomaHawk MB, ASUS ROG Ryujin III 360 AIO 64gig Corsair DDR5@6000, Gigabyte GeForce RTX 4090 AORUS Winwing Super Taurus, Orion2, TO / Combat panels, Collective with Topgun MIP Winwing Skywalker pedals, NLR Boeing Mil Edition Simpit, Trackir Link to comment Share on other sites More sharing options...
Greekbull Posted August 3, 2018 Share Posted August 3, 2018 It looks like the update broke some of this helios profile. The rwr no longer turns on for me in helios. I also noticed the radar switch on the right console isn't functioning. AMD Ryzen 9 7950X3D | ASUS Crosshair Hero X670E | 64GB G Skill Trident Z DDR5 6000 | Nvidia RTX 4090 FE| Samsung EVO Plus 6 TB M.2 PCIe SSDs | TM Hornet Stick/WinWing Hornet Throttle and MIP | VPC T-50 Stick Base | TM TPR Rudder Pedals W/Damper | Varjo Aero/Pimax Crystal VFA-25 Fist of the Fleet Carrier Strike Group One(CSG-1) Discord Link to comment Share on other sites More sharing options...
Tomcat Posted August 3, 2018 Share Posted August 3, 2018 There is a trouble shooting guide on page one of this thread. No solition for m y problem. And also they are set befor the patch! Link to comment Share on other sites More sharing options...
Greekbull Posted August 4, 2018 Share Posted August 4, 2018 Yeah wish I had the knowledge to fix it. Any pointers on how to map controls with the profile? Would love to get it fixed. Love this profile:D AMD Ryzen 9 7950X3D | ASUS Crosshair Hero X670E | 64GB G Skill Trident Z DDR5 6000 | Nvidia RTX 4090 FE| Samsung EVO Plus 6 TB M.2 PCIe SSDs | TM Hornet Stick/WinWing Hornet Throttle and MIP | VPC T-50 Stick Base | TM TPR Rudder Pedals W/Damper | Varjo Aero/Pimax Crystal VFA-25 Fist of the Fleet Carrier Strike Group One(CSG-1) Discord Link to comment Share on other sites More sharing options...
Capt Zeen Posted August 4, 2018 Author Share Posted August 4, 2018 (edited) The problems with the control for the rwr radar etc, were fixed the following day of the patch. Just download again the export files and replace yours. OK, here you got the Fix for the OpenBeta. ED changed the order of the devices from the number 38, so from that device number till the 56, all the buttons points to a wrong device numbers on the export.lua. I fixed the problem in this new package. You only really need to change the new export files from the package. No changes on the profile itself. http://captzeen.com/helios/downloads.asp .. Edited August 4, 2018 by Capt Zeen Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel Link to comment Share on other sites More sharing options...
Capt Zeen Posted August 4, 2018 Author Share Posted August 4, 2018 No solition for m y problem. And also they are set befor the patch! Tomcat, reinstall the monitor configuration files from the rpofile. download again from my site, in the last patch ED changes some files, and you need the last version of the profile ( UPDATE 1) Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel Link to comment Share on other sites More sharing options...
Greekbull Posted August 4, 2018 Share Posted August 4, 2018 Oh awesome thanks Capt Zeen! AMD Ryzen 9 7950X3D | ASUS Crosshair Hero X670E | 64GB G Skill Trident Z DDR5 6000 | Nvidia RTX 4090 FE| Samsung EVO Plus 6 TB M.2 PCIe SSDs | TM Hornet Stick/WinWing Hornet Throttle and MIP | VPC T-50 Stick Base | TM TPR Rudder Pedals W/Damper | Varjo Aero/Pimax Crystal VFA-25 Fist of the Fleet Carrier Strike Group One(CSG-1) Discord Link to comment Share on other sites More sharing options...
Recommended Posts