Deano87 Posted December 29, 2018 Posted December 29, 2018 Yep go for it. I’m in the UK if that makes any difference. I fly for at least 15 hours a week. I have a pretty comprehensive VR sim setup and I have been involved in flight simming for the past 20 years. Also have good understanding of hardware, software and human/computer interfaces. Cheers D Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
DigitalEngine Posted December 29, 2018 Posted December 29, 2018 FireCat, add me too the release version list, Love to help with the beta version, but, to be fair, I'm not sure I'll have much spare time until February. CPU = Intel i7-6700K Motherboard = ASUS ROG Maximus VIII Hero Alpha, w/ the Intel Z170 Chipset, RAM = 64 Gigs of Ripjaws V F4-3400C16Q. GPU = Zotac GTX980ti Amp Extreme Hard-drive = Samsung V-NAD SSD 950 PRO M.2
webweaver40 Posted December 29, 2018 Posted December 29, 2018 Please add me to the list also Sent from my SM-G965U using Tapatalk
FireCat Posted December 29, 2018 Posted December 29, 2018 (edited) DigitalEngine Will do. webweaver40 will add you to the release version list do you also want to be added to the Initial roll-out list? Edited December 29, 2018 by FireCat
webweaver40 Posted December 29, 2018 Posted December 29, 2018 Thank you Sent from my SM-G965U using Tapatalk
Salsam Posted December 29, 2018 Posted December 29, 2018 @Miles Thou I'm on the list but currently don't have the money to join the initial rollout, can I make a request? A "promo" video of the device in use. So basically just you using it normally in DCS. Will help me motivate the need for this device, to my SO ;-) Hopefully it will reach the rest of the community as well :-) A part of NOSIG
hansangb Posted December 29, 2018 Posted December 29, 2018 Hi Deano87 are you interested in the Initial roll-out list do you want to be added? wolle will add you and any others on a daily basis until miles tells me to stop. (I have no idea of the type of timeline for the list. It could be days or weeks so I will update daily.) Initial roll-out list update. Deano87 FireCat FZG_Immel heloguy javelina1 pgh2atl wolle I can be on the initial purchase/rollout as well. I do have every module except for MiGs. Am a Rift user with Pimax 5K+ backer (3,000'ish) so I should have the Pimax for testing in Feb or so. hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
FireCat Posted December 29, 2018 Posted December 29, 2018 (edited) Hi, hansangb you're added. Initial roll-out list as requested by MilesD #266 post. Please read his post before requesting to be added to this list as there is also a release version list which those who have already requested are on. Initial roll-out list D Deano87 F FireCat FZG_Immel H hansangb heloguy J javelina1 P pgh2atl R Ratcatcher V VirusAM W webweaver40 wolle Edited December 29, 2018 by FireCat
Deano87 Posted December 29, 2018 Posted December 29, 2018 I’m still interested in initial roll out testing btw. - missing from above list. Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
webweaver40 Posted December 29, 2018 Posted December 29, 2018 DigitalEngine Will do. webweaver40 will add you to the release version list do you also want to be added to the Initial roll-out list?Sorry, missed the entirety of the message. Yes, please add me to the initial roll out Sent from my SM-G965U using Tapatalk
wolle Posted December 29, 2018 Posted December 29, 2018 Did I get removed from the initial roll out list? [sIGPIC][/sIGPIC] Intel Core I7 4820K @4.3 GHz, Asus P9X79 motherboard, 16 GB RAM @ 933 MHz, NVidia GTX 1070 with 8 GB VRAM, Windows 10 Pro
VirusAM Posted December 29, 2018 Posted December 29, 2018 I agree to be on the first roll out list as well...thanks R7-5800X3D 64GB RTX-4090 LG-38GN950 N/A Realsimulator FFSB MKII Ultra, VKB Stecs Max, Winwing F-16EX Throttle, Winwing Orion (Skywalker) Pedals, Razer Tartarus V2 SpeedMaster Flight Seat, JetSeat
Ratcatcher Posted December 29, 2018 Posted December 29, 2018 Hi, hansangb you're added. Initial roll-out list as requested by MilesD #266 post. Please read his post before requesting to be added to this list as there is also a release version list which those who have already requested are on. Please add us to the initial roll out list. Happy to help initial testing. Techlabs Chameleon Watercooled Gaming PC - Intel Core i7 6700K @ 4.7GHz : Samsung 950 Pro 256GB SSD, Samsung 500 gig SSD, Seagate 1TB 7200RPM Drive : MSI GeForce GTX 1080 "Founders Edition" 8192MB : 800W '80 Plus Gold' Modular Power Supply : 32GB (2x16GB) DDR4 PC4-25600C16 3200MHz : Occulus Rift S : TM Warthog : MFG Crosswind V2 : Win 10 64. PointCTRL.
FireCat Posted December 29, 2018 Posted December 29, 2018 (edited) Initial roll-out list D Deano87 F FireCat FZG_Immel H hansangb heloguy J javelina1 P pgh2atl R Ratcatcher V VirusAM W webweaver40 winkj wolle Edited December 30, 2018 by FireCat
MilesD Posted December 30, 2018 Author Posted December 30, 2018 @ Deano87, Good question. The buttons can be configured to your preference. Since we don't use the center mouse press in DCS much, I have that configured the farthest back button, as well as a long press to activate it, Short press is the radio menu. Mouse wheel is also emulated with center button hold followed by forward or aft for mouse wheel up or down respectively. I am stil working on the UI for user options. Update: Its been a few years since I used my 3d printer so it took me all day to get it working again. I am printing the FCU enclosure as I write this. I could not find the black ABS so the first prints are in white. The Black ABS will be here Monday. If the production molds are holding things up for the "slow roll" I will ship with the 3D printed enclosures and then ship the production enclosures for replacement of the 3D printed ones. Thanks for the list, I think we have what we need for now. It was very helpful to get an idea for the initial production. I have cleared out my message box so if any of the early posters to this thread would like to be on the "slow roll out" drop me a PM. If all tech questions could be asked in the forum that would be helpful. If one person is asking, I am sure others have the same question. As always, thank you to everyone for your support on this project. I feel its getting close. Miles Now shipping up to website Pre-Order Form date 2022/11/15 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/
MilesD Posted December 30, 2018 Author Posted December 30, 2018 (edited) Update: First proof of concept print, I will CNC mill the front and rear endcaps from sheet ABS tomorrow. The 3D printer does not do well on thin flat parts. Edited December 30, 2018 by MilesD Now shipping up to website Pre-Order Form date 2022/11/15 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/
59thCasper Posted December 30, 2018 Posted December 30, 2018 add me to the lost please :) 59th | Casper [sIGPIC][/sIGPIC] Our Website | Our Facebook Page | YouTube Channel | Our Discord System : 9900k 5ghz, 32GB 4166mhz Ram, 2080Ti, Hotas Warthog, Virpil WarBRD base, MFG Crosswinds, VR + TrackIR, All Modules For DCS
MFG62 Joker Posted December 30, 2018 Posted December 30, 2018 Very nice product. Will be interested to buy as soon as it is sold.
MA_Goblin Posted December 30, 2018 Posted December 30, 2018 Great progress :D I don't have the time to be in the test group but for sure I'll buy the release version. [sIGPIC][/sIGPIC] _____________Semper paratus, In hoc signo vinces________________ PC: Intel i7-8700K (4.9 GHz), Aorus Ultra Gaming Z370 MB, Gigabyte RTX 3080, 32 GB DDR3 (3,2 GHz), Samsung EVO 860 M.2 500 GB SSD + Samsung 960 M.2 250 GB SSD Gaming: Virpil T-50 CM2, TM WH Throttle, Crosswind pedals, HP Reverb
*Rage* Posted December 30, 2018 Posted December 30, 2018 (edited) Add me to the initial rollout please! Edited December 30, 2018 by ///Rage [sIGPIC][/sIGPIC] 64th "Scorpions" Aggressor Squadron Discord: 64th Aggressor Squadron TS: 195.201.110.22
Gladman Posted December 30, 2018 Posted December 30, 2018 Update: First proof of concept print, I will CNC mill the front and rear endcaps from sheet ABS tomorrow. The 3D printer does not do well on thin flat parts. I'll take functional over pretty any day. Keep up the good work. i9 9900K @ 5.1Ghz - ASUS Maximus Hero XI - 32GB 4266 DDR4 RAM - ASUS RTX 2080Ti - 1 TB NVME - NZXT Kraken 62 Watercooling System - Thrustmaster Warthog Hotas (Virpil Base) - MFG Crosswind Pedals - Pimax 5K+ VFA-25 Fist Of The Fleet [sigpic]http://forums.eagle.ru/signaturepics/sigpic99190_2.gif[/sigpic] Virtual Carrier Strike Group 1 | Discord
mr_mojo97 Posted December 30, 2018 Posted December 30, 2018 MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA |
Deano87 Posted December 30, 2018 Posted December 30, 2018 Cool, thanks for the explanation miles! Exciting stuff! Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
Recommended Posts