3Dmigoto VR mod for DCS : Label masking, color enhancement, sharpen, FXAA, copy/paste of radio MSG,....

[Sr.]

37 minutes ago, lefuneste01 said:

I finally managed to create a Target profile for the AH64 (I created special modes for TSD, TADS, IHADSS, otherwise it will not be possible to handle tracking mode for TADS and all FCR options). It took me hours to write it, but finally  I managed to fly a bit the AH64.

So I improved the rotor fix to hide only the one of your own ship and I found a way to hide the infamous TADS mirror in the IHADSS. But it will be another key binding to setup...I need to polish the v15.2, maybe I'll release it for next week end.

 

Does this version work with OpenXR?

https://www.digitalcombatsimulator.com/fr/files/3305420/

[lefuneste01]

29 minutes ago, Sr. said:

Does this version work with OpenXR?

https://www.digitalcombatsimulator.com/fr/files/3305420/

no, you need to do what is explained here : https://forum.dcs.world/topic/207154-3dmigoto-vr-mod-for-dcs-label-masking-color-enhancement-sharpen-fxaa-copypaste-of-radio-msg/?do=findComment&comment=4934976

Edited April 3, 2022 by lefuneste01

[Marklar]

16 hours ago, lefuneste01 said:

Did you use the experimental version for OpenXR ?

Maybe I am blind but I cannot find a link for this experimental version anywhere in this topic. On the first page there is only a link for 15.1 version.

ok. I've found it here. Works great. thx

 

Edited April 4, 2022 by Marklar

[DavePastry]

Lshift-F7 is not opening the menu for me for this version, I believe it is installed and working I have the files in my directory and i installed it using open mod manager like I do for everything else, is there a settings file where this hotkey is set that I could check? 

[Marklar]

Do you have any of these turned on? "cockpit illumination", "lens effect" and SSA

[lefuneste01]

13 hours ago, DavePastry said:

Lshift-F7 is not opening the menu for me for this version, I believe it is installed and working I have the files in my directory and i installed it using open mod manager like I do for everything else, is there a settings file where this hotkey is set that I could check? 

Did you read the troubleshooting guide in first post ?

[Sr.]

On 3/27/2022 at 3:04 AM, zildac said:

On 3/26/2022 at 5:26 PM, lefuneste01 said:

Once launched, the loader is waiting for dcs.exe...I do not understand why it did not find it launched...
But anyway, you should have unzipped all the archive before lauching the loader for the target directory. Then launch DCS.exe...How did you launch it by the way?

The screenshot with the loader running from the archive was just for illustration. I unzipped the archive into the bin directory. Well I actually used ovgme. What is the correct folder structure?

I had to alter my path for it to work in OvGME

G:\DCSMods\3DmigotoDCS_VR_15.0_openXR\bin\3dmigoto

Take everything out of the top level folder named "3DmigotoDCS_VR_15.0_openXR" after extracting. For whatever reason, mine started out as  3DmigotoDCS_VR_15.0_openXR\3DmigotoDCS_VR_15.0_openXR

[pognhek]

HI Lefuneste,

I just installed the new version, and i've got an issue with sharpening options. As long as i activated it, i've got a white screen as if everything was overload.

I've tried to reinstall from scrash by making a repair, and starting from a brand new d3dx_user.ini, same issue.

here is some screenshots, with and without sharpening activated.

 

 

 

 

[Thanatos31]

On 4/3/2022 at 7:12 PM, lefuneste01 said:

it really depends of the context. In some cases (dawn,...) shadows may saturate your GPU (even a 3080Ti). But mostly not.

Did you use the experimental version for OpenXR ?

I've used the most recent version of OPENXR , I've tried with disabling the toolkit and enabling it. 
I think the experimental runtime is the one activated at the top of the app? (not at my computer right now) 

[Ghostman]

Hey There did you ever get this posted? 

Thanks

I forgot to post the 15.1 for openXR...I'll do it today. 

[lefuneste01]

23 hours ago, pognhek said:

HI Lefuneste,

I just installed the new version, and i've got an issue with sharpening options. As long as i activated it, i've got a white screen as if everything was overload.

I've tried to reinstall from scrash by making a repair, and starting from a brand new d3dx_user.ini, same issue.

here is some screenshots, with and without sharpening activated.

That's strange, because you should have different settings for cockpit and external. Did you check the trouble shooting guide in first post ? Can you try with sharpen for cockpit only and sharpen and luma settings different from zero ?

4 hours ago, Thanatos31 said:

I've used the most recent version of OPENXR , I've tried with disabling the toolkit and enabling it. 
I think the experimental runtime is the one activated at the top of the app? (not at my computer right now) 

Wait next week end, I'll release the 15.2 which should integrate also the files for OpenXR.

[Thanatos31]

Thank you - as I cannot get it to work with openxr

[pognhek]

hi lefuneste,

yes, i know the troubleshooting doc very well

yes same issue into external and internal sharpen option. I've tried to play with settings of sharpen when i decrease a lot the value, i can distinguish the game but everything is in exceedance as if i have only 4 colors.

No problem, i'll wait the next release, everything is playable without sharpening (and other function works)

Edited April 6, 2022 by pognhek

[lefuneste01]

21 hours ago, pognhek said:

hi lefuneste,

yes, i know the troubleshooting doc very well

yes same issue into external and internal sharpen option. I've tried to play with settings of sharpen when i decrease a lot the value, i can distinguish the game but everything is in exceedance as if i have only 4 colors.

No problem, i'll wait the next release, everything is playable without sharpening (and other function works)

 

I'm not sure the next release will change your issue. Can you post a track or a way to reproduce (which mission)?

[pognhek]

Hi lefuneste,

Do you really want a track file? I do not really use a mission, i use a self made freeflight mission, do you want this one?

But i checked, and it appears on every mission i try.

The only mods i have installed :

-Open fsr

-Simplex v2.31

-Barthek mod terrain causasus and syria

Nvidia drivers 512.15

Please find two examples with external and internal sharpen options.

 

A.

 

 

[pognhek]

additional info :

I made test with a full repair and only your mods (no simplex mods neither open fsr) (and also deleting metashadders2 and fxo directories into saved games) : same issue

 

Do you think it can come from Nvidia settings? (dcs settings are quite common)

Edited April 8, 2022 by pognhek

[lefuneste01]

1 hour ago, pognhek said:

additional info :

I made test with a full repair and only your mods (no simplex mods neither open fsr) (and also deleting metashadders2 and fxo directories into saved games) : same issue

 

Do you think it can come from Nvidia settings? (dcs settings are quite common)

 

Post the mission you are using. Did you use the settings described in troubleshooting guide ?

[lefuneste01]

04/08/2022 : version 15.2 for 2.7.10.19473 Stable and 2.7.11.21408.1 Open beta :

• Better AH64 rotor disabling
• Option to disable TADS & PNVS mirroring
• Compatibility with OpenXR mod.

The TADS mirroring can be toggled off/on by pressing CTRL+i

2 versions are provided:

• The folder 3DmigotoDCS_VR_15.2 must be installed only for usage without openXR mod. The mod will be activated by default at DCS launch.
• The folder 3DmigotoDCS_VR_15.2_openXR must be installed only for usage with openXR mod. The mod must be launched with [DCSInstall]\bin\3dmigoto\3DMigoto Loader.exe prior to DCS.exe execution. 3DMigoto Loader.exe will open a MSDOS windows and wait DCS launch. If dcs.exe has been launched in administrator mode,  3DMigoto Loader.exe must also be launched with this mode.

[Sr.]

On 4/8/2022 at 8:22 AM, lefuneste01 said:

04/08/2022 : version 15.2 for 2.7.10.19473 Stable and 2.7.11.21408.1 Open beta :

• Better AH64 rotor disabling
• Option to disable TADS & PNVS mirroring
• Compatibility with OpenXR mod.

The TADS mirroring can be toggled off/on by pressing CTRL+i

2 versions are provided:

• The folder 3DmigotoDCS_VR_15.2 must be installed only for usage without openXR mod. The mod will be activated by default at DCS launch.
• The folder 3DmigotoDCS_VR_15.2_openXR must be installed only for usage with openXR mod. The mod must be launched with [DCSInstall]\bin\3dmigoto\3DMigoto Loader.exe prior to DCS.exe execution. 3DMigoto Loader.exe will open a MSDOS windows and wait DCS launch. If dcs.exe has been launched in administrator mode,  3DMigoto Loader.exe must also be launched with this mode.

Nice work on the rotor mod. 

[speed-of-heat]

Agreed that's nice work!

[pognhek]

On 4/8/2022 at 1:37 PM, lefuneste01 said:

Post the mission you are using. Did you use the settings described in troubleshooting guide ?

 

I finally found out what was going wrong. Something into the "d3dx_user.ini", and previous settings. I made a full repair, and delete the current file, and start with a empty one. And it works.

I've tried to reinstall the previous one, and the issue reappeared.

Here is my file, if you want to investigate.

So thanks for your support.

A.

 

d3dx_user.ini

[zildac]

Just been playing with this as I wanted the ability to remove/reduce the atmospheric haze. I'm using the OXR compatible version and have only used the haze reduction setting and disabled shadows for Trees and Buildings. I'm seeing an FPS hit of ~12FPS with the mod enabled, versus it not being enabled. Is this consider "normal"? Seems pretty high, but I don't have a reference point, as never used it prior to going the OXR route.

[Fiztex]

5 часов назад, zildac сказал:

Just been playing with this as I wanted the ability to remove/reduce the atmospheric haze. I'm using the OXR compatible version and have only used the haze reduction setting and disabled shadows for Trees and Buildings. I'm seeing an FPS hit of ~12FPS with the mod enabled, versus it not being enabled. Is this consider "normal"? Seems pretty high, but I don't have a reference point, as never used it prior to going the OXR route.

It's normal to loose some fps with 3dmigoto, but I have never lost 12, maybe it's indeed related to OXR. But, if you only need to adjust the haze, you'd be better off with a simple edit of the atmosphere.hlsl

Get any Taz1004 version of shaders and look for "Taz1004" comment in that file. You'll see the line with a haze lowering multiplier, and just do the similar thing with your shaders version and that's it. I'd shown you, but I'm on my phone right now.

It will take some time for the game to rebuild shaders when you'll be launching the modules for the first time, but on the bright side it won't take any performance away from you compared to injectors such as 3dmigoto.

Edited April 11, 2022 by Fiztex

[zildac]

41 minutes ago, Fiztex said:

It's normal to loose some fps with 3dmigoto, but I have never lost 12, maybe it's indeed related to OXR. But, if you only need to adjust the haze, you'd be better off with a simple edit of the atmosphere.hlsl

Get any Taz1004 version of shaders and look for "Taz1004" comment in that file. You'll see the line with a haze lowering multiplier, and just do the similar thing with your shaders version and that's it. I'd shown you, but I'm on my phone right now.

It will take some time for the game to rebuild shaders when you'll be launching the modules for the first time, but on the bright side it won't take any performance away from you compared to injectors such as 3dmigoto.

 

Thanks, that was going to be my next question...what file to edit. I'll dig through and edit it, I already have TAZ shaders in OVGME. So will just use that one file. Yeah, I guess it could be related to OXR. Who knows, will maybe try with SVR enabled and see if there's a smaller drop just to confirm or not.

 

Edit: That worked...many thanks

Edited April 11, 2022 by zildac

[lefuneste01]

8 hours ago, zildac said:

Just been playing with this as I wanted the ability to remove/reduce the atmospheric haze. I'm using the OXR compatible version and have only used the haze reduction setting and disabled shadows for Trees and Buildings. I'm seeing an FPS hit of ~12FPS with the mod enabled, versus it not being enabled. Is this consider "normal"? Seems pretty high, but I don't have a reference point, as never used it prior to going the OXR route.

I loose ~4 fps with steamVR, it mat also depend on options activated. I did not test with openXR.