Jump to content

Recommended Posts

Posted

What happened with the FPS in the Hornet 1989 : Taskforce Challenger Campaign?

You are kidding me: From stable 40 FPS on the stennis with my Rift S to 28 FPS with the 2.5.6 Version, sometimes only 20 FPS.

Same Hardware, same Settings, same Campaign, same Mission:

 

First screenshot is from the stable, second OB 2.5.6

 

https://photos.app.goo.gl/mrMcB3wcxaRbcsnU8

SYS: II Asus X670E-F || Ryzen 9800X3D || Gainward RTX4090 || 2x48 GB Kingston Fury Renegade 6000Mhz || XPG Core Reactor 850 Watt PSU || Kingston Fury 2 TB NVME SSD || WD SN850 1TB NVME SSD || 1 x 500 GB Crucial MX300 SATA SSD || 2 x HDD 3TB ||

INPUT: II Thrustmaster F-16 & F-18 Stick on Virpil War BRD Bases || WinWing Orion2 F-16EX Viper Throttle Combo || WinWing Orion2 F/A-18 Hornet Throttle Combo (With Finger Lift) || WinWing Takeoff Panel II MFG Crosswind Pedals w. Damper || 3 x Thrustmaster Cougar MFD || Multipurpose UFC || II Wheel Stand Pro II

 VR: HP Reverb G2

Posted

Its the same for me too. My dropped with 20-25 FPS. From 60-65 to 35-40 FPS. Same settings.

And ED said, that new 2.5.6 will not affect performace and FPS....

..:NAVY PILOTS ARE THE THE BEST PILOTS:..

Posted

It's interesting in the simple carrier takeoff training missions the Impact is not as high as in the Campaign.

 

See last 2 screenshots: https://photos.app.goo.gl/mrMcB3wcxaRbcsnU8

 

The 3rd is the caucasus training takeoff Mission and the 4th is the gulf training takeoff.

 

FPS better than in campaign

SYS: II Asus X670E-F || Ryzen 9800X3D || Gainward RTX4090 || 2x48 GB Kingston Fury Renegade 6000Mhz || XPG Core Reactor 850 Watt PSU || Kingston Fury 2 TB NVME SSD || WD SN850 1TB NVME SSD || 1 x 500 GB Crucial MX300 SATA SSD || 2 x HDD 3TB ||

INPUT: II Thrustmaster F-16 & F-18 Stick on Virpil War BRD Bases || WinWing Orion2 F-16EX Viper Throttle Combo || WinWing Orion2 F/A-18 Hornet Throttle Combo (With Finger Lift) || WinWing Takeoff Panel II MFG Crosswind Pedals w. Damper || 3 x Thrustmaster Cougar MFD || Multipurpose UFC || II Wheel Stand Pro II

 VR: HP Reverb G2

Posted (edited)

What is also intresting, that i can't see the Oculus Layer Info with Version 2.5.6. That's where you can check if the pixeldensity was set correct. Usually the menu is projected in the Headset in front of the ingame graphics :helpsmilie:

Edited by Gripen 4-1

SYS: II Asus X670E-F || Ryzen 9800X3D || Gainward RTX4090 || 2x48 GB Kingston Fury Renegade 6000Mhz || XPG Core Reactor 850 Watt PSU || Kingston Fury 2 TB NVME SSD || WD SN850 1TB NVME SSD || 1 x 500 GB Crucial MX300 SATA SSD || 2 x HDD 3TB ||

INPUT: II Thrustmaster F-16 & F-18 Stick on Virpil War BRD Bases || WinWing Orion2 F-16EX Viper Throttle Combo || WinWing Orion2 F/A-18 Hornet Throttle Combo (With Finger Lift) || WinWing Takeoff Panel II MFG Crosswind Pedals w. Damper || 3 x Thrustmaster Cougar MFD || Multipurpose UFC || II Wheel Stand Pro II

 VR: HP Reverb G2

Posted

Yep can't see OculusTrayTool hud info in game.

Asus Prime X570-P * Ryzen 5800X3D + Scythe Fuma cooler * RTX 4080 Super * Corsair 64GB DDR4 3600MHz * Samsung 980 pro 2Tb + 1Tb nvme * Samsung 850 EVO 512Gb SSD * Corsair RM850x V2/2018 * HP Reverb G2 * CH Fighterstick/Pedals/Throttle * Win11 Pro

Posted

SYS: II Asus X670E-F || Ryzen 9800X3D || Gainward RTX4090 || 2x48 GB Kingston Fury Renegade 6000Mhz || XPG Core Reactor 850 Watt PSU || Kingston Fury 2 TB NVME SSD || WD SN850 1TB NVME SSD || 1 x 500 GB Crucial MX300 SATA SSD || 2 x HDD 3TB ||

INPUT: II Thrustmaster F-16 & F-18 Stick on Virpil War BRD Bases || WinWing Orion2 F-16EX Viper Throttle Combo || WinWing Orion2 F/A-18 Hornet Throttle Combo (With Finger Lift) || WinWing Takeoff Panel II MFG Crosswind Pedals w. Damper || 3 x Thrustmaster Cougar MFD || Multipurpose UFC || II Wheel Stand Pro II

 VR: HP Reverb G2

Posted
Hmm try deleting your FXO and MetaShaders 2 folders in your user/username/SavedGames/DCSOB folder and see if that helps. It has done wonders in the past.

 

Already done; I do this after every update

SYS: II Asus X670E-F || Ryzen 9800X3D || Gainward RTX4090 || 2x48 GB Kingston Fury Renegade 6000Mhz || XPG Core Reactor 850 Watt PSU || Kingston Fury 2 TB NVME SSD || WD SN850 1TB NVME SSD || 1 x 500 GB Crucial MX300 SATA SSD || 2 x HDD 3TB ||

INPUT: II Thrustmaster F-16 & F-18 Stick on Virpil War BRD Bases || WinWing Orion2 F-16EX Viper Throttle Combo || WinWing Orion2 F/A-18 Hornet Throttle Combo (With Finger Lift) || WinWing Takeoff Panel II MFG Crosswind Pedals w. Damper || 3 x Thrustmaster Cougar MFD || Multipurpose UFC || II Wheel Stand Pro II

 VR: HP Reverb G2

Posted

Massive fps hit. Marginal system

Intel Core i7 3630QM @ 2.40GHz ( Max Turbo Frequency 3.40 GHz)

16.0GB Dual-Channel DDR3 @ 798MHz

2047MB NVIDIA GeForce GT 635M

447GB KINGSTON SA400S37480G (SATA-2 (SSD))

Still it was playable in 1920x1080. Now single digits as often as not.

Intel Core i7 3630QM @ 2.40GHz (Max Turbo Frequency 3.40 GHz) | 16.0GB Dual-Channel DDR3 @ 798MHz | 2047MB NVIDIA GeForce GT 635M | 447GB KINGSTON SA400S37480G (SATA-2 (SSD))

  • ED Team
Posted

Best advice is to remove all unofficial mods run a cleanup and repair or verify for steam users.

 

Delete your metashader2 and fxo folder from your dcs folder in saved games and then restart DCS.

 

If you still have problems attach your dcs log and we will take a look.

 

thanks

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal

Posted
Best advice is to remove all unofficial mods run a cleanup and repair or verify for steam users.

 

Delete your metashader2 and fxo folder from your dcs folder in saved games and then restart DCS.

 

If you still have problems attach your dcs log and we will take a look.

 

thanks

 

Hi Big Newy!

 

Shaders already deleted multiple times, no mods installed, already ran a repair……..:helpsmilie:

 

Performance is really poor! Can't see Oculus HUD anymore. There must be a serious Problem with the update

SYS: II Asus X670E-F || Ryzen 9800X3D || Gainward RTX4090 || 2x48 GB Kingston Fury Renegade 6000Mhz || XPG Core Reactor 850 Watt PSU || Kingston Fury 2 TB NVME SSD || WD SN850 1TB NVME SSD || 1 x 500 GB Crucial MX300 SATA SSD || 2 x HDD 3TB ||

INPUT: II Thrustmaster F-16 & F-18 Stick on Virpil War BRD Bases || WinWing Orion2 F-16EX Viper Throttle Combo || WinWing Orion2 F/A-18 Hornet Throttle Combo (With Finger Lift) || WinWing Takeoff Panel II MFG Crosswind Pedals w. Damper || 3 x Thrustmaster Cougar MFD || Multipurpose UFC || II Wheel Stand Pro II

 VR: HP Reverb G2

Posted

Loading times also increased

FC3 | UH-1 | Mi-8 | A-10C II | F/A-18 | Ka-50 III | F-14 | F-16 | AH-64 Mi-24 | F-5 | F-15EF-4| Tornado

Persian Gulf | Nevada | Syria | NS-430 | Supercarrier // Wishlist: CH-53 | UH-60

 

Youtube

MS FFB2 - TM Warthog - CH Pro Pedals - Trackir 5

Posted (edited)

If I take off and circle arraound the Stennis the FPS always get very low, if the Stennis gets in sight. So there must be a problem with the Stennis since the update

Edited by Gripen 4-1

SYS: II Asus X670E-F || Ryzen 9800X3D || Gainward RTX4090 || 2x48 GB Kingston Fury Renegade 6000Mhz || XPG Core Reactor 850 Watt PSU || Kingston Fury 2 TB NVME SSD || WD SN850 1TB NVME SSD || 1 x 500 GB Crucial MX300 SATA SSD || 2 x HDD 3TB ||

INPUT: II Thrustmaster F-16 & F-18 Stick on Virpil War BRD Bases || WinWing Orion2 F-16EX Viper Throttle Combo || WinWing Orion2 F/A-18 Hornet Throttle Combo (With Finger Lift) || WinWing Takeoff Panel II MFG Crosswind Pedals w. Damper || 3 x Thrustmaster Cougar MFD || Multipurpose UFC || II Wheel Stand Pro II

 VR: HP Reverb G2

Posted

Unfortunately there are still huge FPS drop (at least 25-30) , even when i deleted fxo and metashader2 forders and done repair. Same settings.

I hope ED will optimize performance, because DCS is almost unplayable at this level. :(

I have missions, where FPS is 6-7 (was 40-50 before the update).

..:NAVY PILOTS ARE THE THE BEST PILOTS:..

Posted
Best advice is to remove all unofficial mods run a cleanup and repair or verify for steam users.

 

Delete your metashader2 and fxo folder from your dcs folder in saved games and then restart DCS.

 

If you still have problems attach your dcs log and we will take a look.

 

thanks

 

Did the Job for me at least with HP Reverb. Fps are back to normal but i experience an invrease of Gpu frametimes, but still playable with mostly stable 45 Fps.

 

System is a ryzen 3600x with gtx 1080. msaa off. Slrr off, water textures to Medium and shadows flat only.

GeForce RTX 4090 Founders Edition - AMD Ryzen 7 5800X3D - 64Gb RAM - Win11 - HP Reverb G1 - Thrustmaster Warthog HOTAS (40cm extension) - VKB Sim T-Rudder MKIV Pedals

Posted

Played a mission from Stennis, and my server crashed. I took Stennis out and it worked fine. Have not had a chance to look into logs etc, but I run my server on a hidden install on my wife's PC, and she went nuts at the time the crash happened, all her 20+ browsers windows went white and were frozen plus she lost lives her shitty click bait games lol (these have never caused any issues previoulsy). TF DCS was not in the list of running applications when I told her to go Task manager. I am guessing a memory leak, as DCS completely died?

Windows 10 64bit, Intel i7 6700K, 32GB Corsair 2400Mhz, 970 NVMe 500Gb SSD, GeForce 2080 super, HP Reverb, VKB GF PRO, Thrustmaster Warthog throttle, Thrustmaster Pendular rudders, Windows + DCS :thumbup:

 

My youtube channel

Posted

Framerates still shitty in the F18. Instant Mission with many AI Units still low 20's. Campaign Arab Spring Mission 2 13 FPS. Unplayable!!!

SYS: II Asus X670E-F || Ryzen 9800X3D || Gainward RTX4090 || 2x48 GB Kingston Fury Renegade 6000Mhz || XPG Core Reactor 850 Watt PSU || Kingston Fury 2 TB NVME SSD || WD SN850 1TB NVME SSD || 1 x 500 GB Crucial MX300 SATA SSD || 2 x HDD 3TB ||

INPUT: II Thrustmaster F-16 & F-18 Stick on Virpil War BRD Bases || WinWing Orion2 F-16EX Viper Throttle Combo || WinWing Orion2 F/A-18 Hornet Throttle Combo (With Finger Lift) || WinWing Takeoff Panel II MFG Crosswind Pedals w. Damper || 3 x Thrustmaster Cougar MFD || Multipurpose UFC || II Wheel Stand Pro II

 VR: HP Reverb G2

Posted

After the 2.5.6 update, multiplayer with the F-18 on the Nevada map has been horrible. Drop in FPS!

Why doesn't ED solve the problem right away? It has been repeatedly reported on this forum ...

 

Firma DCS.png

CPU: 12th Gen Intel(R) Core(TM) i7-12700K   3.60 GHz - DDR4 64,0 GB - MSI RTX3080ti - Win 11 64bit

Posted

not just carrier. in MP my framerate was just halved, today in a server when I was close to the enemy base, my FPS dropped to single digits, which caused serious motion sickness(VR)

  • 2 weeks later...
Posted

Same issue poor vr performance after update

 

Im having the same performance drop in vr after the update. Drops to 20 and below on ground and 25 to 30 max up in the air. This is in the f18 however using the f18 in normandy gives me good fps cauc or nevada even with not alot going on gives me very low fps. My system is mediocre i7 3770 oc to 4.1ghz 24gb ddr3 gtx 1080 gamerock edition but i never had issues before this update. Some missions are now unplayable in vr. I hope this is addressed i have tried lowering settings and it has 0 effect no matter how low I go I was running medium to high before this without issues.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...