bejvaloCZ Posted December 20, 2023 Share Posted December 20, 2023 Good day. Could someone please help? I have a new mesh network and am trying to get DCS UFC up and running. I think I have everything set up correctly, but the only thing that works, for example on F16, is the COM button and F1-F12, which are in the application on the map. So, for example, communication with ground staff on a tablet works. Does anyone know where the problem could be? Link to comment Share on other sites More sharing options...
Hazel78 Posted December 21, 2023 Share Posted December 21, 2023 "A game-changer for fans of digital combat simulation is the DCS UFC Android app. Its extensive feature set and easy-to-use interface make it a valuable addition to DCS World, elevating the entire gameplay experience. Strongly suggested for ardent virtual pilots!" Thank you guys thank you guys 1 Link to comment Share on other sites More sharing options...
pet333r Posted January 7 Author Share Posted January 7 New version 1.0.2024.0106 avaible - changed graphics for most panels - added 'F' communication buttons on the MFD panel - M-2000C PCN: fixed data display on LCD - A-10C added illumination of engine/APU fire "switches" - F/A-18C IFEI: data display improved - F-16C added the ability to save the color of the DED display - added checking the installed script version - added information about 'high contrast' mode enabled - optimized the size of some switches - changed icons in settings - app code has been optimized 2 1 Link to comment Share on other sites More sharing options...
Despayre Posted January 7 Share Posted January 7 Clicking on "Update script" seems to only give an error... Totally beside the point, "Something goes wrong" should be in the past tense, "Something went wrong". 1 I'm not updating this anymore. It's safe to assume I have all the stuff, and the stuff for the stuff too. Link to comment Share on other sites More sharing options...
pet333r Posted January 7 Author Share Posted January 7 Clicking on "Update script" seems to only give an error... Totally beside the point, "Something goes wrong" should be in the past tense, "Something went wrong". Try manually removing the script and reinstalling it 1 Link to comment Share on other sites More sharing options...
Despayre Posted January 7 Share Posted January 7 8 minutes ago, pet333r said: Try manually removing the script and reinstalling it Wysłane z mojego RMX3363 przy użyciu Tapatalka I just renamed the pw-dev_script dir first, and that seemed to do the trick. Thanks for that quick reply! 1 I'm not updating this anymore. It's safe to assume I have all the stuff, and the stuff for the stuff too. Link to comment Share on other sites More sharing options...
prestupnik Posted January 8 Share Posted January 8 AV8Bna volume , brightnes knob don't work normal with right IP settings, but work fine with wrong IP settings Link to comment Share on other sites More sharing options...
Blueleader Posted January 20 Share Posted January 20 Hello, There is a display problem on IFEI of the F18 for the RPM and OIL on the right. In fact when there are only 2 digits the numbers are slightly shifted to the left. Thank you for this application Link to comment Share on other sites More sharing options...
Andy t Posted January 24 Share Posted January 24 I recently re-installed windows 10. My setup was working fine before reinstall. After reinstall I got latest version of your script and also re-ran batch file to add firewall rules. I am using 3 android tablets. I verified the IP addressed are configured correctly both on the PC and on the tablets inside DCS-UFC. I am using steam based DCS with MT preview start option. I am experiencing the following problems: 1. Opening DCS UFC on tablet after starting a flight, does't display any data for any panel. 2. if I open DCS UFC before flight, I am able to only display data from the sim. I can not "send" any data (i.e: it doesn't respond when I touch the tablet). I would appreciate any help. Link to comment Share on other sites More sharing options...
Chicki Posted January 25 Share Posted January 25 I concur concerning IFEI for f18. Seeing the same thing. Link to comment Share on other sites More sharing options...
Supernova-III Posted January 30 Share Posted January 30 Hello, would this app work on a smartphone? 1 Link to comment Share on other sites More sharing options...
Major_Bloodnok Posted March 29 Share Posted March 29 (edited) Hi. I really hope you're still supporting this app, I've posted some problems on your Facebook page, but no replies. I fly the AV-8B, and have a few issues with DCSUFC. In single player all works fine except top 3 rotary knobs (both comm volumes and UFC brightness). As soon as I touch them on the tablet they rotate back and forth and are unusable. In multiplayer the same thing occurs, but I also loose all LED info being sent to the tablet. But buttons still work. Is this a port conflict, and is there a fix I can do? Any help would be appreciated, as it's a great app but I can't get the best out of it. p.s. All software and scripts are up to date Edited March 29 by Major_Bloodnok Link to comment Share on other sites More sharing options...
MirabelleBenou Posted March 29 Share Posted March 29 Hello ! I mostly use A-10c 2 and since latest update, I have no more "feedback" on the app. No CDU screen, no switch or rotary moving, no light on warning panels, .... If I push a button or rotary with the app, it move ingame, but in the app, no graphic update. Thanks. 06th Multirole Helicopter Regiment Bataillon d'appui aérien - Escadrille HOG Link to comment Share on other sites More sharing options...
CM2024 Posted 10 hours ago Share Posted 10 hours ago I have the same problem on the F/A-18. For example when I type coordinates on the UFC in the app, it updates ingame, but not in the app. I.e.: When I press button 1 in the app, button 1 is pressed ingame, but I don't see the number 1 on the UFC panel in the app. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts