DCS UFC X ( Android app )

[redtcat2001]

Hi,

someone recently asked about the nozzle position not being shown on the F/A-18C IFEI page....is there any chance that it could be implemented?

By the way, it works great on my winwing MIP system to show the missing engine and fuel data...

Thanks

 

[2IAEFulcrumbg]

Hi I've tried to search in the topic for something like my issue , but I couldn't find anything! So everything works and the MFD's work too, but no display information. buttons seem to work fine on each MFD, I have the latest beta installed. Do I need to manually do something, or is it incompatibility? 

Edited January 30, 2023 by 2IAEFulcrumbg

[dief47]

vor 5 Minuten schrieb 2IAEFulcrumbg:

but no display information

 

The display is not exported, you can only use the buttons. Like the Thrustmaster MFD Cougar, which are only hardware buttons without display.

[2IAEFulcrumbg]

8 minutes ago, dief47 said:

The display is not exported, you can only use the buttons. Like the Thrustmaster MFD Cougar, which are only hardware buttons without display.

Thank you for the quick reply! That still works for me!  Still very useful app, especially the fact that you can use multiple devices! 

[_Milan_]

Am 3.1.2023 um 21:19 schrieb _Milan_:

Hey @pet333r

I really love the app, makes many things much easier. But I have a question, if I am using the app for the F-16 ICP and start a trackfile after the mission it seems like the app inputs were not tracked by the trackfile. Am I missing something? 

Greetings Milan 

Somebody any ideas about my problem? Thanks guys. 

Greetings Milan 

[yuck32]

hi, i have a problem, all buttons work but LCD displays are not exported, i already checked firewall and router ports

UPDATE: everything stopped working

UPDATE 2; Now I have the opposite problem XD, only displays work but not the buttons (ports, IP always under check)

UPDATE 3: everything stopped working again

UPDATE 4: im done with your app 

 

LAST UPDATE 5: okay these are all the issues now:

displays works only if i dont swipe pages or i dont exit

no buttons works except comm/view "F" commands on MAP page

aircraft not displayed on MAP

ports, firewall open, all IP correct (proved by the fact that some functions work in both way)

 

LAST LAST UPDATE: now everything working :D, but I dont know how

Edited February 3, 2023 by yuck32

[_Milan_]

Hey @pet333r

If I am using the app for the F-16 ICP and start a trackfile after the mission it seems like the app inputs were not tracked by the trackfile. Am I missing something? 

 

Greetings Milan 

Edited February 20, 2023 by _Milan_

[TAIPAN_]

There's a bug with the F-14 engine display.

When loading into a new jet, the display still shows the engine FF, RPM etc from the previous jet.

Can this be fixed so it refreshes accordingly? 

Currently the workaround is to restart it.

[Treker]

@pet333r 

Hello, 

Question for F-16 fault display. Is it possible to add Pilot Fault List Display above Caution Advisory Lights? Like DED display is above ICP.

Thank you for great app!

[vctpil]

Hi,

Just a bug report concerning the entered.

I want to enter -38°. I first enter 38, but the apps display +10 and there is no possibility to change the value after that. The aircraft CDU indicate the correct temperature.

See screenshots in attached.

Thanks,

Vincent

[Jascha]

Just a friendly suggestion. For F-16C it would be great to combine ICP page with DED. If DED is right on top it will be more convenient to use. Can it be done?

BTW any update on these suggestions?

On 7/30/2022 at 4:31 PM, pet333r said:

On 7/15/2022 at 4:52 PM, Jascha said:

1. MORE FLEXIBLE PANEL ACCESS IN APP - I'd love to have possibility to choose order of the panels and also option to exclude specific panels from use. So let's say for A-10C I want only UFC and CDU so I can just quickly switch between the two. Other than that it would be handy to have (optional) panel quick access buttons (top or bottom) so it's possible to quickly select a specific panel.

2. MFDs - it would be great if MFD button descriptions are also displayed in the app. So for example, in case of TGP obviously there would not be an actual TGP feed but OSB labels as on the actual TGP screen would be visible in the app as well. Also, in case of A-10C, it would be great to completely emulate DSMS, the same as CDU.

1. This is something I would also like to add, a question of finding some good solution not to change half of the application code

2. I even worked on it, the problem is that each panel and even each OSB button uses a lot of different data (it is not standardized in any way), it would require a huge amount of data checking

[Treker]

@Jascha try portret mode on tablet  It works for me. ICP with DED on top...

[Jascha]

56 minutes ago, Treker said:

@Jascha try portret mode on tablet  It works for me. ICP with DED on top...

Oh, thanks. I didn't know that. But that doesn't help me as my current tablet case supports landscape mode only. Plus it fits nicely just below the screen that way.

My request applies to landscape mode then. ICP panel is too big anyway and for sure there is a place for DED in this orientation as well.

I was also hoping maybe split screen on tablet will be a solution, but I think it's impossible to have the same app in both "windows".

Edited April 10, 2023 by Jascha

[pet333r]

Finally a new update is available, inside a lot of new panels for several machines. It took me a while, but there were a lot of changes, especially in the application code, because what "you can see" is maybe 20% of the changes.

I fixed a lot of things, including some of the ones described here in the forum posts. But for sure there is still something to improve so now I'm going back to work...

changelog for 2023.0430

- A-10C: added V/UHF radio panel ARC-210 / autopilot
- FA-18C: added IFF/ILS/VOL panels
- AV8: added SAAHS / Fuel panels
- AV8: added ELEC / VUHF / ACNIP panels
- AV8: added Lighting panels (internal/external)
- JF-17: added ELEC / ACP
- JF-17 changed font on UFCP
- JF-17 MFCD added support for switches
- F-5E: added Lighting / Weapon panels
- F-14 the entire engine panel has been changed
- F-14 ACMP fixed Master Caution button
- F-14 Lights changed the font size on the knobs
- F-16C UHF: fixed radio frequency knobs
- A-10C AAP: changed handling of switches
- F-16C ICP: fixed display of DED in portrait mode
- FA-18C UFC: LCD display improved
- A-10C CMSC improved data display
- Ka-50 fixed Datalink panel
- Ka-50 PVI fixed swipe panels
- M2000 PPA fixed AUTO switch
- changed a large part of the graphics for: A-10C / AV8 / F-16C / F-14 / FA-18C
- resized buttons of some configurations for better handling
- removed graphics on some panels
- fixed context menu on MFD and JF-17 panels
- information on setting the IP address has been changed
- some switches changed
- application code optimization

 

[TAIPAN_]

Thanks for the update on the F-14 engine panel! Looks very nice so far, haven't had time to fly much yet just ran a quick test.

Also looking forward to the A10C and AV8B changes

[No1sonuk]

Is there a way to make the page change buttons stay at the top of the screen when the page changes orientation?

[Despayre]

Small bug seems to have popped up in the latest release.

 

F-14 - Engines

If left on that page, and you exit the game or leave a server, the app crashes. On any other page, no issue, only if it's on the Engines page.

I wouldn't drop everything to fix that, but it is a bug it seems.

This started only after the latest update, I just hadn't got around to reporting it until now.

[norman99]

Still no chance of getting nozzle position working on the Hornet IFEI?

Other hardware manufacturers (Tek Creations are one) manage to make this work, so the data must be available to read somewhere.

[supersylph]

Can you add a master warning button to the JF17 UFC interface？

[whatthecrappin]

I keep this error on startup of DCS :

 

The following DLCs are not authorized and will be 
disabled:
script cfg @pet333r

 

Any ideas?

 

[Chicki]

Hi.  Been flying the new Sinai map and neither AoA or UFC seems to connect for some reason.  Need help.  Thanks.

[RangerGav]

Hi, love your app and want to ask if we could get the keyboard for the Ah-64 Apache included in the UFC app at some point?

[MavenRaven]

Seconded the Heli question: Is the Apache a possibility? (And Hind, if that makes sense, I'm new to these things ;)).

[YSIAD_RIP]

Another option could be to make a Second App for Helicopters and Older Jets / Warbirds. 

[stenji]

On 5/28/2023 at 10:40 AM, whatthecrappin said:

I keep this error on startup of DCS :

 

The following DLCs are not authorized and will be 
disabled:
script cfg @pet333r

 

Any ideas?

 

Same here.... Any help?