Sundowner.pl Posted June 29, 2021 Posted June 29, 2021 (edited) I'm attempting to make the ASP17 sight look a bit more realistic, it's not fully possible without writing specific shaders for it, but texture replacement seems to getting the job done at least part way there. This is a work in progress, as I'm not 100% satisfied by the current result, but feel free to share your opinion. Download: ASP17 - modified reticle And the real one: Edited June 29, 2021 by Sundowner.pl 3 5 [sIGPIC][/sIGPIC] "If a place needs helicopters, it's probably not worth visiting." - Nick Lappos
Fri13 Posted June 29, 2021 Posted June 29, 2021 (edited) So much better! I was disappointed when I saw that the projector fading on edges is not modeled. So I was hoping it was just a Early Access thing, and I still do. One reason for this is that DCS doesn't model properly the collimator effect ("design eye position") in the HUD's, that you can't see it if you don't have eyes inside the specific area ("eye box"). This makes all HUD's and gunsights look artificial. This makes such effects that you can see the projected information outside the projector and behind a obstacles etc. A thing that ED should try to get better as the SVG was not so good graphical decision to make the highly detailed projection. Edited June 29, 2021 by Fri13 i7-8700k, 32GB 2666Mhz DDR4, 2x 2080S SLI 8GB, Oculus Rift S. i7-8700k, 16GB 2666Mhz DDR4, 1080Ti 11GB, 27" 4K, 65" HDR 4K.
YoYo Posted June 29, 2021 Posted June 29, 2021 Thx! However this default isnt too bad: but of course it "covers" too much, I always try to screw it as much as possible so that it is only slightly visible. Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 4090 24Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
BlackLion161 Posted June 29, 2021 Posted June 29, 2021 10 часов назад, Sundowner.pl сказал: I'm attempting to make the ASP17 sight look a bit more realistic, it's not fully possible without writing specific shaders for it, but texture replacement seems to getting the job done at least part way there. This is a work in progress, as I'm not 100% satisfied by the current result, but feel free to share your opinion. Download: ASP17 - modified reticle And the real one: Very Nice! Thanxs! [sIGPIC][/sIGPIC]
Gunslinger22 Posted July 2, 2021 Posted July 2, 2021 This is a must have, something that become very noticeable in VR is how poorly collimated sights look. Everything else jumps with a realistic feel except how poorly ED have modelled the glow and loss of fidelity a HUD has when nearing the edge of it's focal point. "I'm just a dude, playing a dude, disguised as another dude."
Eldur Posted July 2, 2021 Posted July 2, 2021 The original one is already almost invisible in VR, I guess this mod will remove it completely then...
Gunslinger22 Posted July 2, 2021 Posted July 2, 2021 54 minutes ago, Eldur said: The original one is already almost invisible in VR, I guess this mod will remove it completely then... Invisible in VR you say? I have a G2 and on the default brightness, it is the same luminosity as the sun. Seriously bewildered as to how you think it's almost invisible. "I'm just a dude, playing a dude, disguised as another dude."
Eldur Posted July 2, 2021 Posted July 2, 2021 I'm still on the CV1 and there isn't even remotely any possibility to tune the display settings there. I'm having that issue with all the collimated sights and HUDs though. But at least they are visible. In that other sim they're completely gone unless I sit directly at the sweet spot with µm precision which is why I hardly ever fly that one since I moved to VR. Could be related to the res as I think it's a tad better with the Quest. Can't speak for any LCD or generally more recent high res HMD.
SuperEtendard Posted July 3, 2021 Posted July 3, 2021 (edited) On 6/29/2021 at 6:07 AM, YoYo said: Thx! However this default isnt too bad: but of course it "covers" too much, I always try to screw it as much as possible so that it is only slightly visible. I think that's because it's not properly focused, look at this photo for example, it's much more sharp Edited July 3, 2021 by SuperEtendard
YoYo Posted July 3, 2021 Posted July 3, 2021 16 hours ago, Eldur said: The original one is already almost invisible in VR, I guess this mod will remove it completely then... No any issue in VR for me with default one (but HP Reverb) but Sundowner mod looks better for sure! 1 hour ago, SuperEtendard said: I think that's because it's not properly focused, look at this photo for example, it's much more sharp It depends how close the picture was taken. Webmaster of http://www.yoyosims.pl Win 10 64, i9-13900 KF, RTX 4090 24Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Sundowner.pl Posted July 3, 2021 Author Posted July 3, 2021 The way those sights work is unchanged since the World War 2 - there is a lamp (with filament bulb), that shines on mechanized obscuring screens producing an image of symbology, which then is projected through mirrors and lenses into the combiner glass. In the absolute right circumstances, the image will be crisp. But the inherent flaws in the design will produce image that will not be uniformly lit, the screens get scratched and faded, the combiner glass have some basic coatings reducing ghosting - but not entirely... What I want to do is to represent as many of these natural flaws as possible, while the only tool for that available to us, is the bitmap with its transparency channel. What I will be focusing on now is the brightness of the image, because it is ok for most use cases, but way to dark, to represent the ASP-17 at full brightness setting. 1 [sIGPIC][/sIGPIC] "If a place needs helicopters, it's probably not worth visiting." - Nick Lappos
VampireNZ Posted July 4, 2021 Posted July 4, 2021 Great mod - thanks! It is a shame all HUD projected imagery in DCS looks like it is on a perfect LCD screen, not a projected image. Vampire
Mainstay Posted August 8, 2021 Posted August 8, 2021 ED can you please make this the standard HUD projection? I have the same problem in the F-16 and 18 aswel way to sharp and doesnt feel projected 1
Sundowner.pl Posted August 10, 2021 Author Posted August 10, 2021 What I'm doing is only some texture fakery. ED can add shaders that would make their original texture look realistic without messing with it - like gradient masking the visible range, gradient brightness amplification when in eye is aligned with projected light source, etc. They could also make the K-14 sight more realistic in VR, note that those sights were projecting two images, that were visible by both eyes, without much overlap - the static sight was visible by one, the gyro sight by the other. This aspect of gunsights is not yet implemented in any sim. [sIGPIC][/sIGPIC] "If a place needs helicopters, it's probably not worth visiting." - Nick Lappos
RedeyeStorm Posted October 23, 2024 Posted October 23, 2024 (edited) If you mean, fix it so it passes IC than that is not going to happen until ED allows changed textures to pass or your favorite server allows for non original textures. Edited October 23, 2024 by RedeyeStorm 1
Mainstay Posted October 25, 2024 Posted October 25, 2024 On 10/23/2024 at 8:59 PM, RedeyeStorm said: If you mean, fix it so it passes IC than that is not going to happen until ED allows changed textures to pass or your favorite server allows for non original textures. I mean fix it so it works again.
Recommended Posts