Slippa Posted October 14 Posted October 14 18 hours ago, Cdodders said: nullBombs be spinning Good news if they’re spinning. We might get the upkeeps working So good to see it in our skies 3
Rene Coulon Posted October 18 Posted October 18 On 10/11/2025 at 10:02 PM, BrianTheBrain said: Ai version is out everyone! Pick it up here: https://tallboy-sims.com/ Feel free to give us bug reports here or on discord. HI, Bugs I have so far. Lancaster will not TAXY after landing, shuts down on the runways in Normandy2 Cannot use some airfields the B17 can use even though she has a few feet shorter wingspan Note...is it possible to get her to engage attacking enemy fighters using passive defence at a greater range...0.4/ 0.5 nm is WAY to late. Regards 2 Asus ROG MAXIMUS X Formula Intel i7- 8700K 4.8ghz Asus GTX 2080ti OC edition 64 Gb RAM at 3200mhz Kraken X 72 cooler Samsung CHG90 monitor at 144 htz DCS on M.2 drive 500 Gb
andyc Posted October 18 Posted October 18 48 minutes ago, Rene Coulon said: HI, Bugs I have so far. Lancaster will not TAXY after landing, shuts down on the runways in Normandy2 Cannot use some airfields the B17 can use even though she has a few feet shorter wingspan Note...is it possible to get her to engage attacking enemy fighters using passive defence at a greater range...0.4/ 0.5 nm is WAY to late. Regards I have already mentioned the taxi issue to them on discord. 2
Rene Coulon Posted October 19 Posted October 19 On 6/18/2022 at 8:13 AM, rkk01 said: Interested in the loadout limitations that might apply to the Lancaster within DCS… My understanding is that ED control weapons / ordnance available within DCS??? Clearly the Lancaster justifies some bigger bombs than the 500lbs bombs the Allied WW2 aircraft are currently limited to. I’m specifically thinking of the 4,000lbs Cookie and 12,000lbs Tallboy. There are real world Op Crossbow Lancaster / Tallboy targets on the Channel map, and with South Atlantic making a good “Norway”, we could also use a Tallboy or two in the fjords… (I’d happily forgo the RL Lanc mods that were applied to get the Tallboy airborne ) I have been playing around with the Lancs various bombs....The Big bombs most definately need serious updates from ED . 3 Asus ROG MAXIMUS X Formula Intel i7- 8700K 4.8ghz Asus GTX 2080ti OC edition 64 Gb RAM at 3200mhz Kraken X 72 cooler Samsung CHG90 monitor at 144 htz DCS on M.2 drive 500 Gb
Megalax Posted October 19 Posted October 19 (edited) On 10/13/2025 at 10:38 AM, Scoobyon said: Whats the story about the roundels? I remeber that I put on some post war roundels on top of the wings but I believe that was fixed for all of the liveries, unless your on about something else? They are the modern 2:1 ratio, and incorrect for WW2. WW2 B type roundel : Modern 2:1 roundel : Relinking to the post I made about them here. Edited October 19 by Megalax 2 Megalax's Livery Studio My Liveries in the User Files I'll stick a maple leaf on anything...
Slippa Posted October 20 Posted October 20 I knew it was there somewhere. That’s what I meant about the roundels, cheers Megalax. Plotted some Lancs on the Channel Map the other day. If ‘starting from ramp’ I could only get them planted at Manston. I’ve seen our Lanc take off and land from Biggin a few times and didn’t think it would be a bother. I could ‘take off from ground’ and had them taking off and landing ok from there. Wish ED could make things easier for you tinkerers. Sorting the AI would be a bonus, forming up on anything especially in the turn gets a bit lively. Still chuffed to be able to mess about with it. Well done team 4
Alicatt Posted October 20 Posted October 20 9 hours ago, Slippa said: I knew it was there somewhere. That’s what I meant about the roundels, cheers Megalax. Plotted some Lancs on the Channel Map the other day. If ‘starting from ramp’ I could only get them planted at Manston. I’ve seen our Lanc take off and land from Biggin a few times and didn’t think it would be a bother. I could ‘take off from ground’ and had them taking off and landing ok from there. Wish ED could make things easier for you tinkerers. Sorting the AI would be a bonus, forming up on anything especially in the turn gets a bit lively. Still chuffed to be able to mess about with it. Well done team Seen the Lanc land and take off at Biggin a couple of times when working at the airshow there Should be home next week and then I can at last download the AI Lancaster 3 Sons of Dogs, Come Eat Flesh Clan Cameron
waterman Posted October 20 Posted October 20 10 hours ago, Slippa said: Wish ED could make things easier for you tinkerers. Sorting the AI would be a bonus Yes that is what should happen but it does not ! Just a few words from the Moderators would have been nice for the Lancaster Team. But its just the same old Stone Cold Silence from Moderators for any user made New Mods. Very bad form to just turn your backs and put your fingers in your ears . " Wake up and smell the roses guys " this is an exceptional effort and great for the future of WW2 and DCS ! 3
MAXsenna Posted October 20 Posted October 20 Yes that is what should happen but it does not ! Just a few words from the Moderators would have been nice for the Lancaster Team. But its just the same old Stone Cold Silence from Moderators for any user made New Mods. Very bad form to just turn your backs and put your fingers in your ears . " Wake up and smell the roses guys " this is an exceptional effort and great for the future of WW2 and DCS ! I think you're overreacting "a tiny bit". Imagine all those other modders that will have hurt feelings when their mods doesn't get any attention. Never underestimate feelings! You've been on the Internets long enough.I'm not joking, I'm pretty sure ED pay close attention to this thread. There's a reason some other mods have made their way into the core, and to my knowledge those threads never got even a single positive official acknowledgement from ED.Pretty sure you've seen the videos where the A-4E was featured. And then ED stated it would not be part of the core, but a nod to the team.Wouldn't surprise me at all if we see the Lanc in videos in the future.Personally, if I were ED I would contact YOU to have your trains added to the core. You're doing a fantastic job! Maybe when the train issues in the core get fixed in the future, who knows? I would hire you as the DCS train master if it was up to me! Cheers! Sent from my SM-A536B using Tapatalk 2
Slippa Posted October 21 Posted October 21 18 hours ago, Alicatt said: Seen the Lanc land and take off at Biggin a couple of times when working at the airshow there Should be home next week and then I can at last download the AI Lancaster Must’ve had one of the best views in the house? Lucky lucky . Had some good days there. 1
Alicatt Posted Wednesday at 10:02 PM Posted Wednesday at 10:02 PM On 10/21/2025 at 3:48 PM, Slippa said: Must’ve had one of the best views in the house? Lucky lucky . Had some good days there. I was on the opposite side of the runway to the public, got a nice wave from a Harrier pilot as he taxied past, at other times we had a stand in the public area. Got to see the Swordfish up close at Yeovil and then a few weeks later at Biggin from beside the taxiway, it was a hard job but someone has to do it 2 Sons of Dogs, Come Eat Flesh Clan Cameron
Pappy2 Posted Thursday at 10:55 AM Posted Thursday at 10:55 AM Thanks again for this great work !!!!! 5
andyc Posted Thursday at 02:10 PM Posted Thursday at 02:10 PM 3 hours ago, Pappy2 said: Thanks again for this great work !!!!! stupid question time but how did you get those shots ?? 1
Slippa Posted Thursday at 03:29 PM Posted Thursday at 03:29 PM Yeah, how do we get in it, it looks great. I tried a few F keys, maybe I need to change my keyboard setup? looks mustard .
Slippa Posted Thursday at 03:53 PM Posted Thursday at 03:53 PM 17 hours ago, Alicatt said: I was on the opposite side of the runway to the public, got a nice wave from a Harrier pilot as he taxied past, at other times we had a stand in the public area. Got to see the Swordfish up close at Yeovil and then a few weeks later at Biggin from beside the taxiway, it was a hard job but someone has to do it Sounds great. They’ve built a nice little Museum on that side, (Chapel side). I popped into the Heritage Hanger then had a look around the Museum earlier this year. Peter Monk has a load of lovelies there, hangar tours are something like £50, just under £3k for half an hour in a Spit if you’re flush. Oh, I just remembered, I’ve still got a 45 minute flight in a Tiger Moth to do . My Great-Uncle was a fitter on Stringbags. He was on the Convoys from ‘42. I got a bit of dust in my eye when I saw one fly after he’d gone. Love to see it doing the rounds. I keep meaning to have a good mooch about in Yeovil. I stopped at the gates last year, summers evening so it was closed. Love a bit of the 303, I’ll have to sort it out. Off to hit all the buttons to get in here . 2
cesarferrolho Posted Thursday at 04:04 PM Posted Thursday at 04:04 PM 33 minutes ago, Slippa said: Yeah, how do we get in it, it looks great. I tried a few F keys, maybe I need to change my keyboard setup? looks mustard . Use F4 view and move around using A W D X and Q E if i'm not mistaken... 1 1
toan Posted Thursday at 05:01 PM Posted Thursday at 05:01 PM Wow ! Very impressive Mod ! Thanks a lot, guys, for sharing this great Lancaster and adding it to RAF for DCS ! 2
Slippa Posted Thursday at 06:31 PM Posted Thursday at 06:31 PM Cheers Cesar If this update ever finishes I’ll give it a go 1
Pappy2 Posted Thursday at 07:22 PM Posted Thursday at 07:22 PM Use F4 view and move around using A W D X and Q E Ou avec clavier Français A Z E S et Q D
G.J.S Posted Thursday at 07:35 PM Posted Thursday at 07:35 PM 3 hours ago, Slippa said: Love a bit of the 303, Masochist! 3 - - - The only real mystery in life is just why kamikaze pilots wore helmets? - - -
Slippa Posted Thursday at 07:44 PM Posted Thursday at 07:44 PM 4 minutes ago, G.J.S said: Masochist! You’ve got a point … at the right time, when it’s empty then 2
crazyeddie Posted Thursday at 08:21 PM Posted Thursday at 08:21 PM Seriously good - well done boys. Roundels you know about - the only issue I had was trying to get it off a too short runway with a Tallboy slung under it, it crashed the mission. Otherwise good on long runways. 2
Slippa Posted Friday at 12:44 AM Posted Friday at 12:44 AM I can move the camera view and position but I’m buggered if I can get in it. I’ve hit every key on the keyboard. Any ideas welcome, how do I get in the bleedin thing? 1
AndyJWest Posted Friday at 01:12 AM Posted Friday at 01:12 AM 27 minutes ago, Slippa said: I can move the camera view and position but I’m buggered if I can get in it. I’ve hit every key on the keyboard. Any ideas welcome, how do I get in the bleedin thing? It's AI only for now. Internal views presumably aren't enabled. 1 1
waterman Posted Friday at 02:36 AM Posted Friday at 02:36 AM (edited) 1 hour ago, Slippa said: I can move the camera view and position but I’m buggered if I can get in it. Press F4 then move mouse to rotate view and carefully press keyboard / to zoom out or carefully press keyboard * to zoom in. Position so when you zoom in camera goes through the side of plane then carefully move mouse to look around. Also works with Trains if you want to be in the Drivers position in the Cab or ride in a coach looking out of the window. The main thing is move mouse and zoom carefully and dont press all the keyboard keys you could start WW3 doin that ! Edited Friday at 02:38 AM by waterman 3
Recommended Posts