JayPee Posted August 24, 2014 Posted August 24, 2014 In the past overclocking was a practice that required you to be at least half an engineer, nowadays even the stock software that comes with the hardware provides child proof GUIs with sliders and toggles. The reason I'm suggesting the 4790K is that using the standard software you can already have it run at 4.4Ghz at all times. This is 10% higher than its non-K counterpart for zero difference in price, I'd say that's low hanging fruit... Downside is you need an above par motherboard with a Z97 chipset, an good example is the ASUS Maximus VII, depending on the bells and whistles you want it to have, a mobo of this series will cost you 150 EUR for the bare naked one and 350 EUR for the most pimped one. I'd go with the former and buy a PCIe module if you really really miss a certain functionality like extra USB or WiFi. Also beware of RAM speeds. i7s support 1600Mhz RAM. Overclocking the bus so that it can benefit from higher RAM speeds is difficult, gives hardly any notable improvement, and might even be considered dangerous for the non experienced computer user. Instead, opt for the 'slower' RAM of 1600Mhz and go for 8ms latency RAM. This might be tricky as a lot of brands seem to want you to buy fast RAM with average latency timings while you will want what I just wrote. :) If you want I'll work out a rig for you on paper so you and others can shoot at it.. Figuratively. i7 4790K: 4.8GHz, 1.328V (manual) MSI GTX 970: 1,504MHz core, 1.250V, 8GHz memory
Knubinator Posted August 25, 2014 Posted August 25, 2014 Is there any guide to aerial refueling? I've been trying to do it for a year, and can't connect more than a second. I have a TM Warthog and Saitek pedals, but can never get fuel. Ice been trying and practicing, but I must be missing something. i7 4790k @ 4.4, 32GB RAM, RX480 GTR I fly it all.
Snoopy Posted August 25, 2014 Posted August 25, 2014 Is there any guide to aerial refueling? I've been trying to do it for a year, and can't connect more than a second. I have a TM Warthog and Saitek pedals, but can never get fuel. Ice been trying and practicing, but I must be missing something. http://www.476vfightergroup.com/downloads.php?do=file&id=55 v303d Fighter Group Discord | Virtual 303d Fighter Group Website
Eddie Posted August 25, 2014 Posted August 25, 2014 Is there any guide to aerial refueling? I've been trying to do it for a year, and can't connect more than a second. I have a TM Warthog and Saitek pedals, but can never get fuel. Ice been trying and practicing, but I must be missing something. http://www.476vfightergroup.com/downloads.php?do=file&id=55 Other than what's in the above, practice is all there is to it. Edit: Dammit, sniped by mere seconds.
Allizdog Posted August 28, 2014 Posted August 28, 2014 I would make sure your joystick settings are correct. Maybe your trim settings might be not quite what you want? Experiment. Other than that, what's already been said I guess . . . practice.
Vinny002 Posted August 30, 2014 Posted August 30, 2014 Hi, guys! Question for you, does the free flight mission of the A-10C like rampstart.miz, am I able to refuel at all the airbases? Thanks! Cheers, Vincent
Corrigan Posted August 30, 2014 Posted August 30, 2014 Open the mission in the editor and check if the airfields are Blue. Win10 x64 | SSDs | i5 2500K @ 4.4 GHz | 16 GB RAM | GTX 970 | TM Warthog HOTAS | Saitek pedals | TIR5
Vinny002 Posted September 3, 2014 Posted September 3, 2014 Hi, guys! Question for you, does the A-10C have air brakes or no, if so how do I deploy them? Thanks! Cheers, Vincent
Snoopy Posted September 3, 2014 Posted September 3, 2014 Hi, guys! Question for you, does the A-10C have air brakes or no, if so how do I deploy them? Thanks! Cheers, Vincent :book: page 42 and 90 of the DCS A-10C Flight Manual. :doh: v303d Fighter Group Discord | Virtual 303d Fighter Group Website
Vinny002 Posted September 3, 2014 Posted September 3, 2014 Hi, paulrkiii! Great! Thanks!! Cheers, Vincent
Vinny002 Posted September 4, 2014 Posted September 4, 2014 Hi, guys! Question for you, what is the highest altitude and speed you got the A-10C up to? Thanks! I got the A-10C up to an altitude of around 40,000 feet!! Cheers, Vincent
tommytank Posted September 5, 2014 Posted September 5, 2014 Guys, Is there a way to slave other sensors (e.g. Maverick) to threats identified by the RWR? I guess that would be too easy?
112th_Rossi Posted September 5, 2014 Posted September 5, 2014 Guys, Is there a way to slave other sensors (e.g. Maverick) to threats identified by the RWR? I guess that would be too easy? Yes. With your TAD as SOI, move the cursor over the red flashing triangle. DMS Forward Short, then DMS Forward Long to mark SPI. TWS Forward long to slew sensors to SPI. (Edit, from memory, DMS/TWS may be the other way around)
cichlidfan Posted September 5, 2014 Posted September 5, 2014 The RWR does not locate threats for you, so I am confused by what Rossi posted. ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:
whartsell Posted September 5, 2014 Posted September 5, 2014 The RWR only provides type, bearing and strength of a RF emission. Arduino,EOS and Helios Tutorial Static ATC menu mod
112th_Rossi Posted September 5, 2014 Posted September 5, 2014 The RWR does not locate threats for you, so I am confused by what Rossi posted. Sorry, misread. Thought he meant TAD. Theres a round about way to triangulate a thread based on RWR position but I'm not going to go into that. I think in RL it is possible but not reflected in the sim
shagrat Posted September 5, 2014 Posted September 5, 2014 Guys, Is there a way to slave other sensors (e.g. Maverick) to threats identified by the RWR? I guess that would be too easy? Careful! The RWR does not provide ANY distance information! It just tells you direction and strength of a radar signal, plus trying to identify the most dangerous threat. As a rule of thumbs, the closer the icon to the center, the greater the danger of getting shot at, by the unit behind the icon. The inner circular ring provides an estimation of launch distance, so what you want to do is put a threat on the beam and try to keep it out of the inner circle, to stay safe. Unless you want to engage the threat. Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore)
tommytank Posted September 5, 2014 Posted September 5, 2014 Maybe I asked the wrong question. Told me what I needed though. Hadn't noticed the symbology on the TAD, but I've normally got the stores page up.
PFunk1606688187 Posted September 6, 2014 Posted September 6, 2014 Maybe I asked the wrong question. Told me what I needed though. Hadn't noticed the symbology on the TAD, but I've normally got the stores page up. You should pretty much have the TAD page up 24/7. Its the only MFCD page I never don't have up because its the biggest multiplier of your SA you can get. It blends moving map GPS location, target sharing via SPI, flight plan waypoints and mark points and all the other goodies. DSMS is just useless 90% of the time except to check for your remaining stores. You should use the HUD as SOI to cycle your active weapon profiles and switch the Master Mode as appropriate. There's a reason that you have Coolie Hat Down Long as a DSMS page quicklook - this strongly implies that the HOTAS system was designed to not have the DSMS page on the MFCD except very briefly at any point past the preflight stage. As for RWR its an SA instrument only linked to the countermeasures system. It has no link in sim to any other systems. Warning: Nothing I say is automatically correct, even if I think it is.
Vinny002 Posted September 9, 2014 Posted September 9, 2014 (edited) Hi, guys! I'm seeing something strange. The compass tape is not shown on the bottom of the HUD. Do you know what it says on the bottom of the HUD? Please see attached. Thanks! Cheers, Vincent Edited September 9, 2014 by Vinny002
Snoopy Posted September 9, 2014 Posted September 9, 2014 Looks like your scratch pad v303d Fighter Group Discord | Virtual 303d Fighter Group Website
Vinny002 Posted September 9, 2014 Posted September 9, 2014 Hi, paulrkiii! I just checked. By George, you are right! It is my scratchpad! How do I get the compass tape back? I think I got the compass tape back now. Thanks! Cheers, Vincent
shagrat Posted September 9, 2014 Posted September 9, 2014 Press and hold <CLR> on the UFC... as per Manual Section about the UFC. Alternative is the Clear button on the CDU. Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore)
Roger Ramjet Posted September 17, 2014 Posted September 17, 2014 A10 engines For how long can I agonize the engines on full throttle? Till my tanks are dry or the a/c will suffer overtemp or failure? Excuse my English, please.
JayPee Posted September 17, 2014 Posted September 17, 2014 In the sim forever. No sure about the real jet but I've never seen anything indicating otherwise. Maybe Paulrkiii can shed some light on it... i7 4790K: 4.8GHz, 1.328V (manual) MSI GTX 970: 1,504MHz core, 1.250V, 8GHz memory
Recommended Posts