VTJS17_Fire Posted July 27, 2013 Share Posted July 27, 2013 trim function doesn't work.. confirmed. Hardware: Intel i5 4670K | Zalman NPS9900MAX | GeIL 16GB @1333MHz | Asrock Z97 Pro4 | Sapphire Radeon R9 380X Nitro | Samsung SSDs 840 series 120GB & 250 GB | Samsung HD204UI 2TB | be quiet! Pure Power 530W | Aerocool RS-9 Devil Red | Samsung SyncMaster SA350 24" + ASUS VE198S 19" | Saitek X52 | TrackIR 5 | Thrustmaster MFD Cougar | Speedlink Darksky LED | Razor Diamondback | Razor X-Mat Control | SoundBlaster Tactic 3D Rage ### Software: Windows 10 Pro 64Bit [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Pepec9124 Posted July 27, 2013 Share Posted July 27, 2013 (edited) Another bug found, I can hear some hydraulic system all the time during flight. It's playing pin.ogg in endless loop. It occurs right after ramp takeoff. Maybe somehow connected with refueling system. Will attach track if needed. Edited July 27, 2013 by Pepec9124 Link to comment Share on other sites More sharing options...
Oesau Posted July 27, 2013 Share Posted July 27, 2013 air turbulence noise from the airbrake in the A-10A is no longer present Link to comment Share on other sites More sharing options...
theropod Posted July 28, 2013 Share Posted July 28, 2013 after hotfix, my game cant turn back to menu after i finish flights on single missions and mission editor with A-10A , i'm always getting 'dcs stop working' error after flights. but i am not getting same crash with other planes of fc3. Link to comment Share on other sites More sharing options...
71st_Mastiff Posted July 28, 2013 Share Posted July 28, 2013 air turbulence noise from the airbrake in the A-10A is no longer present confirmed I put it in the DCS World section, I guess they need to move that one too. " any failure you meet, is never a defeat; merely a set up for a greater come back, " W Forbes "Success is not final, failure is not fatal, it is the courage to continue that counts," Winston Churchill " He who never changes his mind, never changes anything," MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 || MSI RTX 4080S|Game1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Asus|| Link to comment Share on other sites More sharing options...
Conroy Posted July 28, 2013 Share Posted July 28, 2013 ^^^ This bug in A-10A AFM (flying fine without wings) already reported to ED It's not only "without wings" but also "without engines". You can fly while you're burnig instead of to explode. Link to comment Share on other sites More sharing options...
howie87 Posted July 28, 2013 Share Posted July 28, 2013 Don't know if it's a bug or if it's just not modelled but the slip indicator doesn't work. Stays centered no matter how much rudder you use. Link to comment Share on other sites More sharing options...
Pepec9124 Posted July 28, 2013 Share Posted July 28, 2013 Fresh 1.2.5 install has fixed default camera angle bug. Rest remains. Link to comment Share on other sites More sharing options...
JABO2009 Posted July 28, 2013 Share Posted July 28, 2013 A10A still hasnt the same light animation as the A10C. not really a bug but pls ED fix this ! Intel I7 - 10700 K @ 3,80GHz / 64 GB DDR3 / RTX 3090 / Win 10 Home 64 bit / Logitech X56 HOTAS / HP Reverb G2 Running DCS on latest OB version Link to comment Share on other sites More sharing options...
kontiuka Posted July 29, 2013 Share Posted July 29, 2013 Only part of the HUD info is visible when zoomed in Hi. A lot of the A-10A HUD data is missing when zoomed in. All you see is the pitch ladder (see screenshot). Link to comment Share on other sites More sharing options...
Wichid Posted July 29, 2013 Share Posted July 29, 2013 Hi. A lot of the A-10A HUD data is missing when zoomed in. All you see is the pitch ladder (see screenshot). Move your head forward and you'll be able to see more of the HUD. Lyndiman AMD Ryzen 3600 / RTX 2070 Super / 32G Ram / Win10 / TrackIR 5 Pro / Thrustmaster Warthog HOTAS & MFG Crosswind Rudder Pedals Link to comment Share on other sites More sharing options...
Ryback Posted July 29, 2013 Share Posted July 29, 2013 It's not only "without wings" but also "without engines". You can fly while you're burnig instead of to explode. And it's burning even though i turn off the damaged engine.. Should it? Link to comment Share on other sites More sharing options...
kontiuka Posted July 29, 2013 Share Posted July 29, 2013 Move your head forward and you'll be able to see more of the HUD.I assume you're talking about Track IR. I'm one of the 1% on here that don't have it. But I should be able to see the entire HUD anyways. Doesn't seem to be an issue in other planes like the F-15C. Link to comment Share on other sites More sharing options...
Pepec9124 Posted July 29, 2013 Share Posted July 29, 2013 I assume you're talking about Track IR. I'm one of the 1% on here that don't have it. But I should be able to see the entire HUD anyways. Doesn't seem to be an issue in other planes like the F-15C. I can see whole HUD when zoomed in w/o TrackIR. Try fixing it by cuting out DCS folder/Convig/View and running repair. Link to comment Share on other sites More sharing options...
howie87 Posted July 29, 2013 Share Posted July 29, 2013 Flying online today against a buddy in the A-10A and he was near indestructible! I blew both his wings off and he kept on flying like nothing had happened even though he looked like a pile of burning scrap metal. For saying this has been released a a complete stand alone module for $15, it's pretty shoddy. This needs fixing ASAP. Link to comment Share on other sites More sharing options...
VapoR Posted July 30, 2013 Share Posted July 30, 2013 When I go to the controls page all the controls for the A-10C are listed under the A-10A. Some of the ones don't work at all like the weapons release, weapons fire, and cannon mode. I had a similar thing happen before with the Su-25A and the A-10C where the Su-25 had all the assignments for the A-10. It took a full uninstall and delete of all files associated with DCS to fix that one. I really don't want to do that as it's becoming an install dance to get this thing going: --Install Lock-on --Install DCS World --Install A-10C --Install Flaming Cliffs --Install Combined Arms --Uninstall Lock-on --Track down all left over files from Lock-on install and delete them --Clean registry of Lock-on entries --Run DCS and let auto updater do its magic --Set up graphics and sound settings to preference --Hopefully controls section will display correctly. Spend time setting up control profiles for each aircraft with 3 different controllers (Ch stick, throttle, Saitek Rudder) --If still awake, run an instant action mission to uncover what steps were messed up on Link to comment Share on other sites More sharing options...
kontiuka Posted July 30, 2013 Share Posted July 30, 2013 I can see whole HUD when zoomed in w/o TrackIR. Try fixing it by cuting out DCS folder/Convig/View and running repair.Didn't seem to work. Thanks anyways. Link to comment Share on other sites More sharing options...
Windsortheater Posted July 30, 2013 Share Posted July 30, 2013 Any idea when the next hotfix is coming? I only ask since prior releases have had some comment from the developer as to the anticipated release date. Can't wait to fly the A-10a!! Link to comment Share on other sites More sharing options...
71st_Mastiff Posted August 3, 2013 Share Posted August 3, 2013 (edited) A10A Hud bug? and 100% throttle? http://steamcommunity.com/sharedfiles/filedetails/?id=166228705 seems to be a bar across the hud.. also I seem to be going way to fast now and have 100% throttle control on the A10A? also airbreaks no sounds and seem to have an issue with the hot key. :joystick: Edited August 3, 2013 by Mastiff " any failure you meet, is never a defeat; merely a set up for a greater come back, " W Forbes "Success is not final, failure is not fatal, it is the courage to continue that counts," Winston Churchill " He who never changes his mind, never changes anything," MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 || MSI RTX 4080S|Game1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Asus|| Link to comment Share on other sites More sharing options...
chokko Posted August 3, 2013 Share Posted August 3, 2013 ground refueling (getting crew to take fuel out rather) seems to do nothing other than play the sound indefinately. if I have a right engine fire and land, request repair and wait 3 mins...cosmetic damage is repaired. start left engine and wait for apu+left engine to start, then try to start right engine but it never gets past 29 on RPM. Happened multiple times. Bug or am I missing another step? [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
heloguy Posted August 4, 2013 Share Posted August 4, 2013 Zoom in/out Slow The zoom in and out slow buttons (forward slash and asterix on the numpad) seem to be inop on the new A-10A. Also inop if mapped to a joystick button. i9 12900k @ 4.9ghz, 32gb RAM Nvidia RTX 3090 Windows 11 x64 Pimax Crystal VP Force Rhino w/RS F16GRH, Virpil TCS Rotor Plus AH-64 Collective, BRD F1 Pedals, WH Throttle, FSSB R3 w/WH Grip, PointCTRL v2 Link to comment Share on other sites More sharing options...
kontiuka Posted August 4, 2013 Share Posted August 4, 2013 I can see whole HUD when zoomed in w/o TrackIR. Try fixing it by cuting out DCS folder/Convig/View and running repair.Actually, I can see the whole HUD when I zoom in manually. But when I do a snap view to the HUD, that's where I have problem. It's a view I use a lot so hopefully it will get addressed. Link to comment Share on other sites More sharing options...
frakkingcylon Posted August 8, 2013 Author Share Posted August 8, 2013 It seams that the Autopilot controls are still bugged. I even tried clearing the controls and reloading the default profile in the input folder, still no dice. Link to comment Share on other sites More sharing options...
71st_Mastiff Posted August 8, 2013 Share Posted August 8, 2013 It seams that the Autopilot controls are still bugged. I even tried clearing the controls and reloading the default profile in the input folder, still no dice. yep I changed them and the only one that will work is the "A" key.:joystick: " any failure you meet, is never a defeat; merely a set up for a greater come back, " W Forbes "Success is not final, failure is not fatal, it is the courage to continue that counts," Winston Churchill " He who never changes his mind, never changes anything," MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 || MSI RTX 4080S|Game1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Asus|| Link to comment Share on other sites More sharing options...
skouras Posted August 8, 2013 Share Posted August 8, 2013 apart from this bugs i would like to see a key combination for the PAC right now we've got the GUNARM mode pitch up style [sIGPIC][/sIGPIC]W10(64bit)Asus Rog Strix Z370-F - i7 8700K - Dark Rock Pro 4 - 16 giga ram Corsair vengeance 3000 - MSI RTX 2070 Super - Asus Rog Phobeus soundcard - Z906 Surround speaker - Track ir5 - HOTAS Warthog Link to comment Share on other sites More sharing options...
Recommended Posts