All Activity
- Past hour
-
I see that,firstly, I had NPI 2.4.0.08 which didnt have exactly the same editable lines.In NVidia App,I changed the settings for DLSS overide to"Use the 3D application setting". After a lot of back and forth I now have DLSS 310.4.0 with preset K. So far I dont see a difference in graphic quality,although maybe(wishful)a bit less shimmering. Thanks for all the helpful replies.
-
Sweet. Does this work in MP?
-
Mike Force Team started following Lucarrr
-
Так то да. Даже сам подраздел BAM в мануале находится в разделе даталинка. Просто в рамках взаимодействия с ИИ CPG в игре это становится ещё и инструментом ограничения зоны поиска целей, которым игрок пилот кочет объяснить Джорджу в какой зоне искать цели. Тут замечаю три вещи: - он и правда довольно точно при сканировании TADS остается внутри зоны. Не знаю, насколько точно он игнорирует попавшие в FOV объекты за пределами зоны, но с этим пока не видел отклонений. - почему в интерфейсе ИИ CPG из списка Area Searches, относящихся к фиче Battle Area Management, доступно только OWN PFZ, а ACTV PFZ не получается подсветить и пользоваться, не взирая на активацию PF в BAM TSD? Это известная проблема или я не туда понатыкал? - бывает весьма не просто сопоставить район обнаруженной цели с тем, что мы видим на растровой карте на TSD, чтобы потом взять и точно обрисовать PFZ/NFZ. Особенно, если рядом нет населенных пунктов, зато френдли и противники близко друг к другу. Понятно, что в жизни это не сильно нужно может быть. Да и пилот имеет возможность рисовать зоны точно, попросив CPG посмотреть на углы зоны с лазерной дальностью и наблюдая отметку TADS на TSD (особенно ловкий CPG может этот финт самостоятельно исполнить). Пока писал, нарисовалась идея: Просим Джорджа смотреть в предполагаемый угол зоны (прямой PHS Search) и получить лазерную дальность (Lasing), а сами ловко тыкаем углы зоны ровно в крестик TADS на TSD! Черт, это страшный вертолёт Шорт лист обнаруженных целей может содержать их аж 16 штук. Если его утвердить Джорджу и разрешить самостоятельное ведение огня из пушки, то этот горячий парень так и сделает - загрызет их всех последовательно, всех, которых не потеряет из виду при маневрировании. Мешают тут только две замеченные вещи: - порой он слишком рано переключается на следующую цель. Очередь еще не покинула ствол, а пушка, следуя TADS, уже перенацеливается на следующую из шорт листа. Это чаще приводит к еще более быстрому поражению целей, но иногда и к «подранкам». Торопится, короче. - достаточно часто он принимает команду на стрельбу, но не стреляет, долго не стреляет. Тут помогает длинное прожатие кнопки согласия на огонь, которая теперь стала контекстной и на этапе Target Tracking & Engagement подправляет наведение TADS (функция ADJ+). Должно ли быть так?
-
Rudel_chw started following Units Stay Close When Adding New Ground Units
-
Or save the Group as a Group Template, so you can use it on other missions as well.
-
SayIntentions.AI ATC - SimAPI could be used for DCS
thetford569 replied to thetford569's topic in DCS 2.9
I've finally had time to actually try your repo and just wanted to say THANK YOU for getting this working. I talked to Brian a couple of days ago and he was going to turn on the UHF frequencies soon (within the next week was what he had hinted at). I may have to shoot him a reminder but it was on his list to get done. Any chance at getting the AH-64 and CH-47 working with this in the near future? -
As some may know I service SoHo and smaller companies like up to ~25 people, nothing too big, so it's relative comparable to what can happen to you, me, everybody. Today was such a day, nothing really special, replace old HW with Win10 with 6 new Win11 Pro clients which put together, GB-B850-9600x-1TB 990Pro-Seasonic Platinum 500w fanless-32GB_6000 and a DarkRock-5 in a nice and quiet bequet tower. The building was fun despite 1 MB was DOA, but they just flew. Did that 2 weeks ago and today I planned to roll them out. Save Data and Mail from old PC to server Setup local LAN static IP and DNS rename PC join AD setup accounts install all LAN printers restore Data and Mail rinse & repeat...1..2..3..4..5..BANG !!!!! I accidently ended up on the wrong desktop, i was in RDP on Server instead of on the local Desktop, both had 2 File Explorers open, Task manager, windows over windows, I opened the the RENAME THIS PC on the wrong Desktop !! ME IDIOT !!!! I RENAMED THE Active Directory Controller, AD-DC, to PC-3 !!!!!!!!!!!!!!!!!!!!!!!! hit OK and then found out FUUUUUuuuuuuu§& WRONG RDP --> WRONG FILE EXPLORER --> WRONG CONTROL PANEL -----> GOD DAMN WRONG MACHINE to rename and I picked the worst machine you can possibly rename while in production and running THE DOMAIN CONTROLLER My blood froze, my pulse went to 180 from chilling low 60s, my promise to be home at 19:30h THE LATEST suddenly became a lie and my biggest fear was: "You're gonna either have some damn luck, PRETTY SOON, or you end up with Acronis, putting the Backup from last night on" Ya, after you made the bootstick, 20min, went upstairs to the server. a real ClusterFu%§ visualising what was ahead of me if I didnt come up with something quick, quickly . So, I know how to rename a DC, you DON'T do it like you do with any other Windows machine, it's a Powershell command, 3 of them iirc, with reboots and DNS entries. Not complicated, but must be obeyed or you screw up the directory, or your access to it...f you only run 1 DC, that must be said to be fair. OK..Google... it says...you did the WRONG thing, there is NO easy way out, you either use a Backup or REINSTITUTE the Domain, which basically means you might as well reinstall the whole damn thing, that's 1 day alone if ALL goes right. I did that server and it is not difficult, just a lot of stuff and it takes time and care. So...I had no choice.. I had to reboot it while I was there, no way out, you dont want to expore the outcome of that 40km away and only VPN,Teamviewer/RDP/VNC at hand. OK, the server has an Enterprise Dell iDrac that I can access from here, that would have worked even from remote...but here it goes. So I rebooted, there was no "rename again" back to SRV possible, it needed the reboot to commit. So I did. It booted to login screen, so far so good. At least no AD DB error while booting, that is a total mess then. OK, OK...so far great...try to login.. Login as admin and pwd --> Red Pop-Up --> No security entry in AD Database for this workstation. Login denied! OHH SH!T You cannot log into the local domain aka PC/Server on a DC, it is ALWAYS a log in into AD-admin. So I could not do SRV\administrator to log into the Server locally w/o Domain. I tried despite I knew it wouldn't work and it didn't, waah ! You're finally screwed !!!! You have a booting 2022 AD-Controller with a wrong name that doesnt connect to the network, doesnt show shares you could connect to and SOMEHOW work, heck, if the SQL's would run, I'd have more time to sort out things...but this beast doesnt do ANYTHING but boot to Welcome screen and sit there forever. mI also couldn't even finish the 6th PC and drive home, I was about to join AD when that happened There is no guide on Google or in AI that tells you how to redo that mishap. It's a nail in the server's coffin that you usually don't get out again. That is what gave me headaches, the not having options to fix it, just FIX IT, god damn, it's only a few lines of code...ok maybe a few more it's AD and thus deeply DNS integrated...WTF, how could you fall into exactly this pit, this No-Way-Out pit, with a big "How to Sink a DC" sign above it in Neon. Aaarghhh, a big client..and you screwed up his DC, it better runs Monday morning 7am, no matter what, no matter. So...I have it all on Acronis on a Linux Server as well as in Acronis Cloud, that would be the ultimate thing to fix it if I didnt come up with a solution, something dead simple, stupid simple, as quick&dirty as the renaming was. But what. OK,...lets try F8 and Safe Mode, maybe there is something that can be done.....but wait....I cannot reboot or shut it down. The DC-Server Welcome Screen in contrast to Client Windows OS has no Button to restart or shutdown, it's a safe guard. Well, lets see Dell's iDrac....but there have never been drivers installed in the OS for any iDrac, so I did not expect see a graceful OS shutdown/reboot option, just the normal AC operations which I knew. I was right, no graceful options, warmstart or cold restart or OFF. Yeah, what a freaking nightmare, I have to reset the server now as well, a Russian Roulette with AD Database and RAID's, you never reset server unless you really really really have to. I had to ! Show balls !! Grab it btP ! I hit warm restart and was then greatet with a UEFI Secure Boot error, luckily I could just say "screw you, I already have enough trouble!" and clicked it away and it kept booting through the many Dell UEFI and FW screens, I kept hitting F8 over and over agin. Made it, Boot options came up 1 to 9..or 0 god knows. 4 is Safe Mode.... but wait....boot to LAST KNOWN WORKING CONFIGURATION ! ???? OK, that is not ment to fix any AD structural damage if there is any but it should rewind the actual PC-settings I changed a reboot ago !? Let's try, there is really nothing to loose but the 5min it takes to boot. If it screws up and crashes I go the Acronis route, chill and wait until restored, if Acronis lets me down I am screwed, then I am gonna spend Sunday here, for free, fixing my sh!T. Monday 7am is deadline. The server booted, as before, login available, no errors so far....now try the usual DOMAIN\administrator PWD and see if it locks up. TATTAA....It fixed it, dead simple decade old rescue option fixed the misconfig, in a very lucky way I admit. The narrow path with too much domain on one side and too severly misconfigured HW on the other side, this option was golden, it saved a lot of work, money and effort. And I, I will, after 30 years, watch even closer now..on which RDP or Desktop I am before I rename a machine in a Directory ! I really felt baaaad the first 5 minutes after it happened, the"You screwed it Up!" hit hard. Anyway, that server booted as nothing ever had happened, DNS was correct, DHCP changes I made were also still present, all good. Fixed that last PC, printers, users, Mail, done. When I got home, 2h late, my step daughter looked at me, said "You know how late you are!!?" went out and took off...LoL I still felt great, still do, having a beer and typing this.... better than installing a 2022 SRV with AD, Rolls, Software, Users and what not else till 2am and all Sunday too. Done that, thank you, my beer tastes a lot better than that ! God save the command "Revert to last known working configuration" Prost
-
Winwing MCDU -can it be used in DCS - for other aircraft
GunfighterSIX replied to hreich's topic in Winwing
That did it, Thank you! -
Thank you so much for sharing... NOT!!!
-
On an RTX 3090 - Black screen after booting into safe mode ——- fixed
Akula replied to Akula's topic in Game Performance Bugs
Thanks for the update. I should have posted a correction a long time ago. I currently running 576.52 and the problem came back so I'll have to troubleshoot further to see hat the problem is. If you don't mind, could you try it again? I'm just wondering if I was able to get into safe mode because the reversion wasn't followed by a restart prior to trying to get into safe mode. -
Cheers for the chuckle
-
well if it correct as-is then why move it to the wish list, care to explain that as well?
-
BavarianPilot started following nil pointer when saving mission
-
VR stuttering - less cores, less stuttering (to a point)
sleighzy replied to NeinNineNiner's topic in VR Bugs
It definitely works on Quest 2. Works on pretty much all headsets. It uses fixed foveated rendering for non-eye tracked headsets. Correct. Use Quad Views instead, same author. - Today
-
They won't work correctly, ever. They are not made to replay the exact sequence of events in a mission.
-
There is a real problem here, in that the dual target track mode in MiG-29S provides an STT lock warning for both targets, despite being more akin to TWS. The R-77 can definitely be guided in STT, but it uses the same datalink as in other modes. It's not a true SARH mode like what the AIM-54 does when fired in STT. A random presentation on missiles, especially if not translated by someone who knows exactly what they're doing, is not a good source, especially if the real FM states otherwise.
-
I saw this, which is a plit throttle. No buttons. The OP used an arduino and "Used an Arduino micro to interface with the PC and read the potentiometer signals from the throttle itself. There is a library for Arduino that allows it to read like a USB peripheral, like a keyboard, joystick, throttle etc" No idea which library, where to look. Looks like he got it to work on DCS. This is the STL(I think) https://www.thingiverse.com/thing:4445717 If I can find the software this could help the budget limited playes?
-
No, there is not. But you can copy the group once you are happy with it with the good old fashioned Ctrl+C and Ctrl+V.
-
Remembering the days where you had to DL drivers via modem from a BBS, nothing like www or such...and TM was reachable by phone from like 17:00 to 19:00h only, with a dude on the phone that sounded as enthusiastic as I did in my early 20's and my first, actually 2nd, TM gear, F16-TQS-Rudders . You said "one of my pots is going haywire"... and what did they send you ? - 4+ Pots - many knobs and switches...just in case - a complete wiring for the stick - rubber feet for all - springs for the rudders iirc as well - EPROMS !!!! to update your Firmware/bios Whenever there was a new Bios for the Hotas, you got an Eprom in Mail for free. You just had to replace it yourself, 5min work. Havent had to reach out to them ever since, but even if they only do half of that now, they are miles better than OT's experience with WW. I'd not consider WW for myself, there is no soul behind it, like with MFG or other small manufacturers with a real, tangible person behind it. Customer Service goes a long way, makes relationships tighter, builds trust and both benefit if done right. Just fixed the Home PC from the Senior Boss of a customer of mine, my client's Dad so to say. Took me 15min, fixed the obvious bugs, introduced him to adfree YT with Brave, which he almost lost tears about - what a relief, installed Teamviewer and when he asked me what he owed me I said "NOTHING !!", told him, your son always pays my service bills promptly, never questions my recommendations and has had no trouble with that... if you need help ..gimme a call, tell me this number and pwd and I can help you, directly. That's how you treat a customer at 9pm after installing their new IT all day long in their business, only had coffee and cigarettes...you smile...it's why I do it, help people and luckily they pay me too cause they see the mutual benefit of valuing each other. A dying pov. Reading the above from WW tell's a different story.
-
Pressing the mouse middle button twice activates the mouse view to look around, do it again, and it goes back to pointer mode
-
Nonsense because the radar has a scan mode on the aisle, and the P-77 does not work in STT., nullIt says so here
-
Pantsir and Tor M2 shoot down Hellfires
MA_VMF replied to Ian Boys UK's topic in Currenthill Asset Packs
-
Ранее существовал вот этот проект. Для профессионального использования. Даже был сайт. https://www.avsim.com/forums/topic/489687-the-battle-sim/ https://www.openflightschool.de/course/index.php?categoryid=3&lang=de
-
average_pilot started following Oasis Driver now in Steam Store for windows mixed reality
-
Нет никаких дебрей, так как все было известно изначально. Информация открыта в той мере в которой должна быть открыта. И это никакая не реклама. Ничего крамольного, ничего шокирующего. Любой производитель чего либо , будет рад получить заказ с хорошим финансированием, да еще и двойного назначения. Многие разработчики игр так или иначе имеют отдельные профессиональные версии. Просто надо отделять коммерческий проект от игрового. Есть игровой - это DCS для простых пользователей, и есть профессиональный "КЛМН" - закрытый. Нас , простых пользователей, он волновать не должен. (в том числе где, как и для чего он используется)