All Activity

It is not giving me trouble with any other game, software or whatever other than DCS, but we don't know for sure its G HUB.

У меня ощущение, что я схожу с ума... если между положениями "ВЗЛЕТ" и "ПОСАДКА" нет никакой разницы, то зачем для выполнения одного и того же действия делать, соответственно, две разные кнопки (по кнопке "УБРАНЫ" вопросов нет)? Логичнее было бы сделать только "ВЫПУЩЕНО" и "УБРАНО", а то прям какой то бредятиной попахивает...

I get what you are suggesting, but why would that apply specifically to the missile/rails and nothing else? I have a little bit of ghosting with fast aircraft moving against the background with DLAA, but nothing llike the jittering of the missiles.

You have a temporal anti aliasing turned on (DLSS, DLAA, TAA, FSR...) With a temporal solution for anti aliasing, some object movements are nullified (wingtip and rails) while others are conserved (wingtip AAMRAMS). It is dependent on contrast and size. So they appear disconnected. Try to zoom right into the missile and rail to see if the rail and missile are moving together. IIRC I did that and saw them properly connected. It is been a while I don't use MSAA and always saw this discrepancy using DLAA since late 2023 when I got the Viper. There are other instances of this phenomenon happening as well, in and outside DCS.

he's talking about the mw-50 vs fuel in the mw-50 tank. Technically, you overboosted the engine only once (without mw50), so this switch's position shouldn't really matter that much so early into the flight time, however I noticed you got to 2600rpm & 1.4 ATA pretty quickly and stayed there until the engine failure. Try limiting to 1.3 ATA max and see if that extends the engine's life (don't over-boost to 1.8 ata either, even if just for a split second). null

yes it can if you take off from the carrier with an incorrect trim ....

Another big thing to think about is the size of your target. You can pick up a flight of bombers at 50k ft. Pretty much at the max range of your scope. MIG 21s and other smaller single seat fighters have a smaller RCS if they're heading straight at you. So listening to that "Hot/Cold/Flanking" should give you an idea of when you will pick up the target. And if youre doing things manually, which Aspect knob to use.

In my mind, G-HUB is an absolute crap piece of software that shouldn't be running if possible. Other's milage may vary. Only thing it is good for, is to keep the rainbow puke on my mouse at bay, but for that I'm not willing to compromise my DCS experience.

My perception from the video is, that there is much more wing tip movement due to the inertia of the missiles, but the connection between the missile and its rail seems rock solid. What I was going for ist that in the game the missiles jiggle relative to their rails. The momentum on the wing is missing for the most part. But that's just not a feature and no "bug" afaik.

I'm not so sure if the real world methods are applicable to a Joystick in front of or on top of a desk.... Trust me on that. The less resistence your stick offers, the better for helicopter flying. Ideally you would have a stick that has no/little/adjustable spring re-centering force and holds every postion you put it in (like a real world cyclic would), but that would need a FFB-Device like the VP Rhino of FFBeast (or the frinckin' Moza). VERY recommendable - but VERY expensive as well.... With a common spring loaded joystick, it is vital, that you choose the right trimming mode in the special options and learn how it works! You DON'T want to fight the stick!

For me, everything is running fine with the OG Crystal. No crashes and very good performance. You might want to check if you run some unofficial mods or did do some fancy stuff to the finicky pimax software. A full repair of DCS might also help.

The pressure thing was a British Army instructor teaching new pilots to take off/hover in their first Gazelle lesson, in a 1990s documentary. I figured he'd know what he was talking about... I already have no curve set, nor any saturation. It's all on default, +/- zero. I'll have a play with the trim later tonight... and try not to look at my dashboard!

Thank you all for answering me.

Was haltet ihr von nem zerkratzten X670E B-Ware für ~175€. Scheint mir alles wichtige (genügend PCI slots) usw.. zu haben. USB4 brauch ich nicht, WiFi7 a ned! https://www.notebooksbilliger.de/msi+mag+x670e+tomahawk+wifi+mainboard+b+ware+881970 Gibt jede menge B-Ware Boards, mal fehlt dies, mal jenes...

i was not trying to be crass. so i apologize if i came off that way. i use G HUB too. i have 11th gen i9 which does not have P/E cores. only 8 cores which are like P cores. lots of users have 14th gen (which i believe @SharpeXB has). there are many of these users with various problems. keep in mind that it is intel. they have been perceived for many years as managerial oafs. i bet they are cutting corners with chip production. back to G HUB. i have two mice. one is for DCS. it is on a desk mounted tray in the center of my desk and chair position. i use my left hand to operate in DCS. both are set as below. note that the DPI speeds matter too. DCS is not an FPS so who cares.

Нормальная выставка занимает 10 минут с момента включения (навигация + икв основное и запасное). Согласовывать можно сразу после включения, во время грубого выхода. Если до полутра минут перевести в работу (тумблер подг\работа), то через 3 минуты от включения будет ускоренная готовность (ускоренный выход, без точного выхода).

here is the crash log file: dcs.20240625-155127.crash

Hi, Just tested at Kola, with 2 different buildings, and can confirm that this trigger condition do not work on that map, pity

Technically we have none and none is planned. But the general types we have are F-4 and F-16, with A-6 coming soon.

This mod has great potential. Unfortunately it has some constant crash issues with Pimax Play resulting in game crashing to desk top. I have researched and tried numerous ways to comply with the online system crash advice, but nothing seems to work. Trying the old open XR and Pimax play start options initially start off fine, but then almost at the exact same spot taxiing from a cold start the sim crashes. It is very frustrating, especially considering the amount of time I have dedicated to learning this module. As far as my rig, I am operating a Cyber Power Intel(R) Core(TM) i9-14900K, 3200 Mhz, 24 Core(s), 32 Logical Processor(s), with Nvidia GeForce RTX 4090. So handling this module and DCS should be no problem. These crashes only happen with this MiG-29A module. It appears something is wrong with this module and Pimax Play. Anyone else having these issues?

I know you guys are trying to help, and thanks for that. I also help here from time to time. But I think the suggested app is not a valid solution. I don't use any mods, or tacview or any programs that alter or mine data from DCS, only program outside DCS that both me and SharpeXB are using is Logitech G HUB, maybe that is related to this problem?

I use a motorcycle Steering Damper on my thrust master pedals works a treat the last time I used one was on my TL1000s about 130mph the bike would try to go into a tank slap.

You mean the Phantom? What other weasel is in the pipe?

Only for STT. That's from Jester seat using Next Launch button. No way to do that from the pilot seat - no such option in the Jester menu. As the manual says:

hello. my suggestion is install the sim without changing anything in windows. see how the sim performs. make a list of shortcomings and then methodically make changes one at a time until you are satisfied. welcome back and good luck!