All Activity

Yeah not sure what is going on with AA with AMD right now. I just updated the gpu and started using optiscaler. Now Im using DLSS on an AMD card lmao.

hreich, This may sound simple but would like to confirm: Have you verified the position of each monitor in Windows prior to running DCS World? I have to manipulate 2 of my monitors from the Windows Display Settings before I start DCS. In my instance, two of my MFD display swap (e.g. Left MFD becomes Center MFD, Center MFD becomes Left MFD). Additionally, the arrangement & alignment of your monitors are unusual. Are you using an iPad to export 2 MFDs and another iPad to export the AMPCD (Center MFD)? Is the resolution of Monitor 3 2048x1536? The alignment of Monitor 3 is not aligned to the left margin of monitors 1 & 4. Could you share a screenshot of your monitor setup from Windows Display Settings? Is it possible to change the resolution on Monitor 3 to match the others (1920x1080)? Then it could be placed below Monitor 2 and provide good alignment. What is the resolution that DCS sees? How is your monitor configuration file setup? Here is my example: Monitor 1 is the main viewport (2560x1440). Monitors 2 - 4 are small 800x600 monitors that are used for Left MFD (#2), Right, MFD (#3), and Center MFD (#4). I have to swap monitor 2 & 4 to correspond the displays to the Cougar MFD panels. In my example, DCS sees a resolution of 4960 x 1440. DCS will generate objects in the invisible portion (below monitors 2 - 4) but I will never see it. I have specific coordinates in my monitor config file to prevent DCS from showing objects below monitors 2 - 4.

Pimax Sync 2025 Date: September 19, 16:00 GMT See you @ https://www.youtube.com/@PimaxVR

We are pleased to announce that our team has successfully fulfilled 95% of the orders for the Crystal Super 50 PPD model. Production continues at a steady pace to address the remaining orders. Customers who have pre-ordered the 50 PPD model are advised to check their inboxes, as we are sending out emails to verify shipping addresses before the headsets are dispatched. For the 57 PPD and Ultrawide models, we can confirm that the component shortages which led to an earlier delay have been fully resolved with our partners. We are now working to accelerate production and catch up on the schedule. 57 PPD A batch of 57PPD headsets has already been scheduled for our users, and more are on the way. You'll first get an update that your headset is produced, then another one when it has been quality checked and shipped out. Please hang on. You may review the impressions and feedback from VR Flight Sim Guy and Martin (Sweviver) via the following videos: Ultrawide Regarding the Ultrawide model, production is now fully underway, and these units are scheduled for a second inspection before shipment arrangements are finalized. This communication serves as our most recent production timeline for the 57 PPD and Ultrawide models.

Very nice! Tkx

Very interesting.... I noticed several Pimax systems running continuously in task manager and wondered why so many.

You're right. So is Sirrah.

You have to taxi back to the original parking slot you started at. Slot 19 Its located GOLF area. Its marked in the game in map view too. LG

I did see Baltic Dragon flying the C-130J and I think someone was filming, but it was probably for that person's YouTube channel, not Baltic's or ED's. There was also someone from ED there with Baltic, I forget his name, but he wasn't really there to represent as much as to be on hand. Expo was 90% racing, 7% flight simming, and 3% VR, to give you an idea why there is not much footage for the flight sim side. There was only one flight sim cockpit, and that was the Airbus one. There were no other flight sim cockpits, only 1 rig. All the other flight sims were tabletop with HOTAS. And yes, the C-130J was in an area like a LAN party, but that was OK. I myself probably would have filmed more, but I had my son in tow and had to keep an eye on him which wouldn't make for good video footage. v6, boNes Baltic Dragon at 01:26:50!

Looking forward to official statement from ED (e.g. whitepaper) compared to unofficial AI content generated video.

I would love to see a Colorado map (especially), Canadian Rockies, or even a Texas and surrounding areas Map. Playing out alternate reality scenarios, future scenarios, 2nd US Civil War (hope not!), invasion from Mexico scenarios (think Red Dawn movie or Invasion America books). This would open up some really fun gameplay and content creation scenarios plus provide beautiful scenery to fly over.

Just to let you know the big s530's and 500kg low drag bombs and 4x bombs on fuselage, launched/dropped from wing stations or fuselage, consistently fail to drop in single or launch separately on the EE version, not tested on others. Saw that this was a bug noted in April in another thread and supposedly fixed? also noticed i could not get lazer bombs to track 6 times in a row with correct codes for drone also, but unsure if poor laser or drop angle at this time did try toss bombing them at a 60+ angle and the fell passed the drone and into ground between targets with no track?

Hehe I totally get your frustration. It's like all normal polite behavior, goes down the drain as soon as people set foot in the magically digital world called "internet". Just let it slide.. There's plenty of stuff in life worth getting agitated about, this isn't one of them.

@MivwTaupos @s4lt3d do you have any 3rd party mods (unofficial ones) installed? Unless there is a major bug with AAR it seems to be something on your end, as we tried many missions with the beta testers and everything worked OK. There is a growing number of bugs that happen only to some players which we are unable to reproduce, which can be very frustrating for both sides...

In my squadron we experienced this two or three times during touch and goes, but we did not find the cause of this.

You also have an option to enable invulnerability at mission start, to avoid too much frustration with this mission! And Gratz on nailing it!

For now I would treat the statements made in this AI generated video as unofficial. Until now we have now actual statements from ED. If indeed they came to such conclusions, then I am wondering they should explain how they made them. On top of it I would expect, is possible able to replicate IRL scenarios with consistent results.

Appreciate this feedback! Will double check the last mission again. Many thanks!

Yup! They couldnt even test how it would perform against active missiles. And its not like modern RWRs are amazing in this regard, they can give you seconds of warning time at the best of times. Seems like there is a specific SARH warning, but this isnt completely reliable either: https://www.digitalcombatsimulator.com/en/news/2025-07-12/ Tbh I think its pretty cool to have this kind of detail modelled. Already like the attention of detail in the F4, and looks like ED is also stepping it up!

The offset was bugged at some point, but I think it should be working fine now...

Sorry up front, I forgot to save the track file But perhaps anyone else had this issue, perhaps it is a known problem in the F-4 (feature), or maybe even a known bug? I was doing some training touch-and-gos the other day at Ramstein AB. I was properly in the flow and Jester praised me every single time But.. After my 4th touch-and-go, I couldn't raise my landing gear. I was able to flip the landing gear lever, but nothing happened. I tried landing and taking off again, but still it stayed down. Any ideas on what might have caused this? I can imagine something like this could happen after a hard landing, but they were all pretty smooth (really, you can ask Jester)

@OmasRachE we checked the mission recently and it worked well. I don't think frequencies could change anything as all flights push at a given time... but if you have any 3rd party mods installed (unofficial ones), run Viacom or Voice Attack it is likely having impact on the AI behavior on your side.. could that be the case?

Hi, Firstly I'm very much enjoying the challenge but I think there maybe an issue with mission 13. The issue:- On approach to the refuelling tanker both baskets are already deployed. On the first refuel, the mission advice suggests using the starboard basket. I approach the starboard basket following the pre-contact message. I cannot connect, I get the breakaway advice - which I ignore - but I still cannot connect. It looks to me that I should have a successful connection. My wingman makes no attempt to refuel on the left basket. I move across to the left basket and successfully refuel. I disconnect but again my wingman makes no move to refuel. Ultimately the game times out with a mission fail. Your thoughts? Regards BK.

Hm, this is interesting. I'll have a look and will try to get to the bottom of this. In principle yes - if you miss your assigned target, then wingman will be tasked with taking it out. But I am not clear about the procedure, it should look like this: 1) You are tasked with attacking the lead APC, your wingman attacks the trailing one (simultaneously) 2) If you hit a wrong vehicle or don't hit anything you are tasked with attacking again. 3) If you miss again, then Devil 22 is tasked with destroying it. 4) Then you are told to attack the Gundish. If you fail, you are told to reattack. If you can't or miss again then the wingman takes care of the gun dish. 5) When gun dish is killed, you receive another target - tanks. But the campaign checks how many ordnance each of you have left and assigns targets according to the count (you first, then your wingman until he runs out). Which brings me to a question: did you alter your or wingman's loadout for the mission? 6) Then when you are both out of GBUs, there is a tasking to attack the trucks (it is always Devil 22 that gets this task). @Aerovenator can you look at the list above and tell me how your mission flows in relation to it? That will help me troubleshoot the problem.

Just bought a PSVR2 will be here tomorrow not looking for super sharp but Blacks I am more interested in for night missions I miss the look of the CV1.