3ra_Luke

Sorry for updating this old message thread, but I have the same problem as DMarkwick. Worked perfectly a few months before and now, suddenly (I don't know when exactly because I don't usually fly the F-16 and I have F-18 panel over the ICP, so I didn't noticed, maybe for months). I really tried all possible solutions mentioned here and Reddit and I don't have more ideas. 1. Checked export.lua file. I tried all Simapp options for creating new file, block the file, etc.. 2. Full re-install (8 times) of SimAppPro, last June version and also older versions, deleting all folders before created by SimAppPro. 3. Checked USB cables and tried different USB 3.0 ports. 4. Tried all possible SimAppPro settings for ICP and even re-installed the firmware. 5. Flying in Falcon BMS 4.38, ICP screen works perfectly. DMarkwick, anybody, did you found the solution?

In my opinion, having tried F16EX with FFBB kit and F16EX standard CAM/Springs base (both with shaker add-on), you only should buy the FFBB kit if you fly exclusively on the F-16. In fact, I installed yesterday the Orion 2 Joystick CAM/Spring/Damping Extension Kit , replacing the FFBB add-on that came preinstalled with my Orion 2 base, and for me it's the perfect match. The standard Orion 2 base, is, IMHO, simply perfect for all aircraft and sims. For me, flying different aircraft including the F-16, FFBB kit was a mistake.

In my opinion, having tried F16EX with FFBB kit and F16EX standard CAM/Springs base (both with shaker add-on), you only should buy the FFBB kit if you fly exclusively on the F-16. In fact, I ordered the Orion 2 Joystick CAM/Spring/Damping Extension Kit for replacing the FFBB add-on that came preinstalled with my Orion 2 base. I can't get used to it. The standard Orion 2 base, is, IMHO, simply perfect for all aircraft and sims. For me, flying different aircraft including the F-16, FFBB kit was a mistake.

Hi all, As some of you have noticed, the Kiowa has slightly height deformed screen size using WW MFDs . My questions is simple: Is there a way to edit any of the .lua files to modify the height size and adapt the MFDs screens to the correct size? Or at lest until Winwing updates the software. To modify wwtMonitor.lua file is a possibility, but I tried to modify it manually and no luck. Any of you tried it? Thanks in advance.

Working correctly here. After the two DCS updates, and the two SimappPro updates, I copied again the wwt folder in both places, following the instructions, and everything seems to work.

Hi, I´ve just purchased F-16EX, Base 2 and Orion 2 with F-15EX. Everything is beyond my expectations. The HOTAS works perfectly. Every button, every slider.. All perfect. But, I have a red message like this in the test screen. I updated firmwares (this message appears before and after the update), checked USB ports to be in-board, etc. I dont understand what could be the problem, as everything works perfectly inside and outside DCS. The buttons and sliders tests are all green. I tried changing usb ports, calibrating and tweaking the usual things with Windows 11, but still, the message is there. Anybody can help and direct me in the right direction?. Thanks so much in advance.

I have this flashing problem too. I always notice it i.e on F/A-18 Caucasus ground support quick mission. At first, I thought the mission had some kind of script to change weather or time of the day every few minutes. I'm happy to know it's not only me. Thanks.

Available now. Una maravilla, Japo. No me quería ir al trabajo hoy hasta ver como quedaba, y es perfecto. Gracias.

For me, after last beta update, the training missions start in external view and in GAME mode. Anyone?

Same here using Paypal. I cancelled the order twice, because the process never finishes correctly. I will try again later.

With 2.7, the rain effect is better ‎depicted ‎than before, but still, I find the chubby drops (mostly the ones falling in the sides and over of the cockpits) not very realistic. If only we could have the size of those drops, smaller, could be enough to make it great. @pastranario3 please, take a look. Thanks!

I have a similar problem, also with Syria map. I paid it via PayPal, but the order was cancelled at third day, after several email reminders for finish the payment, even if I had the proof of charge in PayPal. I sent two tickets on different days since last week and not a single reply. I don't understand. This never happened before. All my purchases were made with PayPal before... Maybe is a long holiday in Russia? Tnx.

:( So, unless you add those to the HOTAS, I need to go back to use default keys instead CTS. It's a pity, because I love CTS voiced feedback macros like for use propeller or mixture. I need to use the engine controls on IL-2 BOS. Unless you use them you will fry the engines. :helpsmilie: Cheers.

Thanks Home Fries. The thing is I can't find, in game, testing button combos, nor looking into the IL2 profile jpg, any of the engine commands shown in my screenshot. A simple example is oil, water or any radiators. Where is the command? Maybe the profile image is not updated?. It says 2.45 version. See image attached. Also, I noticed that opening IL2GB.ttm I seen mentions of the radiators, like i.e.: define IL2GB_OilRadiator_Close_P CHAIN(DOWN+USB_RIGHTGUI,D(ModDelay_IL2GB),USB_HYPHEN) define IL2GB_OilRadiator_Open_P CHAIN(DOWN+USB_RIGHTGUI,D(ModDelay_IL2GB),USB_EQUALSIGN) But I'm too clumsy to find the correct commands in my Warthog HOTAS. I don't use MFDs, btw. About the new instant zoom, its just 4-5 different keys for 4-5 different zoom levels. I think only maximum and medium level are usually used, so, what about the "Boat Switch"?. That way you don't need to keep pushing the zoom key. Forward, set maximum zoom. Middle, zoom off, Back, set Medium zoom. Now Boat Switch is used for autopilot left , right.. Who uses that? :-P Anyway, the zoom as is now in CTS, with the slider, is much better than using keys. Thanks.

Hi Home Fries, Finally I decided to use CTS on different sims from DCS. At last. I started with IL-2 BOS. Took me some time to made all changes in the config, and adapt myself to use the keys different from the ones I´ve been using for 20 years. Luckily there is a "uniformity" between the keys usedby CTS profiles in DCS and lots of the keys used for CTS BOS, so it was easier for me to remember the keys and commands. BUT, also noticed there are lots of keys missing and the last update in the CTS profile was made for the 4.006 version. Now, the oficial version is 4.007. Besides the new zoom options we have now with 4.007 update, if I´m not mistaken, all those in the attached image are missing, and they are very necesary cause they are critical for engine control. Is ther any ETA for new CTS profile for IL-2 BOS? Is there any possibility to include the mentioned keys and the new zoon keystrokes?. Thanks!