3ra_Luke

Sorry for updating this old message thread, but I have the same problem as DMarkwick. Worked perfectly a few months before and now, suddenly (I don't know when exactly because I don't usually fly the F-16 and I have F-18 panel over the ICP, so I didn't noticed, maybe for months). I really tried all possible solutions mentioned here and Reddit and I don't have more ideas. 1. Checked export.lua file. I tried all Simapp options for creating new file, block the file, etc.. 2. Full re-install (8 times) of SimAppPro, last June version and also older versions, deleting all folders before created by SimAppPro. 3. Checked USB cables and tried different USB 3.0 ports. 4. Tried all possible SimAppPro settings for ICP and even re-installed the firmware. 5. Flying in Falcon BMS 4.38, ICP screen works perfectly. DMarkwick, anybody, did you found the solution?

In my opinion, having tried F16EX with FFBB kit and F16EX standard CAM/Springs base (both with shaker add-on), you only should buy the FFBB kit if you fly exclusively on the F-16. In fact, I installed yesterday the Orion 2 Joystick CAM/Spring/Damping Extension Kit , replacing the FFBB add-on that came preinstalled with my Orion 2 base, and for me it's the perfect match. The standard Orion 2 base, is, IMHO, simply perfect for all aircraft and sims. For me, flying different aircraft including the F-16, FFBB kit was a mistake.

In my opinion, having tried F16EX with FFBB kit and F16EX standard CAM/Springs base (both with shaker add-on), you only should buy the FFBB kit if you fly exclusively on the F-16. In fact, I ordered the Orion 2 Joystick CAM/Spring/Damping Extension Kit for replacing the FFBB add-on that came preinstalled with my Orion 2 base. I can't get used to it. The standard Orion 2 base, is, IMHO, simply perfect for all aircraft and sims. For me, flying different aircraft including the F-16, FFBB kit was a mistake.

Hi all, As some of you have noticed, the Kiowa has slightly height deformed screen size using WW MFDs . My questions is simple: Is there a way to edit any of the .lua files to modify the height size and adapt the MFDs screens to the correct size? Or at lest until Winwing updates the software. To modify wwtMonitor.lua file is a possibility, but I tried to modify it manually and no luck. Any of you tried it? Thanks in advance.

Working correctly here. After the two DCS updates, and the two SimappPro updates, I copied again the wwt folder in both places, following the instructions, and everything seems to work.

Hi, I´ve just purchased F-16EX, Base 2 and Orion 2 with F-15EX. Everything is beyond my expectations. The HOTAS works perfectly. Every button, every slider.. All perfect. But, I have a red message like this in the test screen. I updated firmwares (this message appears before and after the update), checked USB ports to be in-board, etc. I dont understand what could be the problem, as everything works perfectly inside and outside DCS. The buttons and sliders tests are all green. I tried changing usb ports, calibrating and tweaking the usual things with Windows 11, but still, the message is there. Anybody can help and direct me in the right direction?. Thanks so much in advance.

I have this flashing problem too. I always notice it i.e on F/A-18 Caucasus ground support quick mission. At first, I thought the mission had some kind of script to change weather or time of the day every few minutes. I'm happy to know it's not only me. Thanks.

Available now. Una maravilla, Japo. No me quería ir al trabajo hoy hasta ver como quedaba, y es perfecto. Gracias.

For me, after last beta update, the training missions start in external view and in GAME mode. Anyone?

Same here using Paypal. I cancelled the order twice, because the process never finishes correctly. I will try again later.

With 2.7, the rain effect is better ‎depicted ‎than before, but still, I find the chubby drops (mostly the ones falling in the sides and over of the cockpits) not very realistic. If only we could have the size of those drops, smaller, could be enough to make it great. @pastranario3 please, take a look. Thanks!

I have a similar problem, also with Syria map. I paid it via PayPal, but the order was cancelled at third day, after several email reminders for finish the payment, even if I had the proof of charge in PayPal. I sent two tickets on different days since last week and not a single reply. I don't understand. This never happened before. All my purchases were made with PayPal before... Maybe is a long holiday in Russia? Tnx.

:( So, unless you add those to the HOTAS, I need to go back to use default keys instead CTS. It's a pity, because I love CTS voiced feedback macros like for use propeller or mixture. I need to use the engine controls on IL-2 BOS. Unless you use them you will fry the engines. :helpsmilie: Cheers.

Thanks Home Fries. The thing is I can't find, in game, testing button combos, nor looking into the IL2 profile jpg, any of the engine commands shown in my screenshot. A simple example is oil, water or any radiators. Where is the command? Maybe the profile image is not updated?. It says 2.45 version. See image attached. Also, I noticed that opening IL2GB.ttm I seen mentions of the radiators, like i.e.: define IL2GB_OilRadiator_Close_P CHAIN(DOWN+USB_RIGHTGUI,D(ModDelay_IL2GB),USB_HYPHEN) define IL2GB_OilRadiator_Open_P CHAIN(DOWN+USB_RIGHTGUI,D(ModDelay_IL2GB),USB_EQUALSIGN) But I'm too clumsy to find the correct commands in my Warthog HOTAS. I don't use MFDs, btw. About the new instant zoom, its just 4-5 different keys for 4-5 different zoom levels. I think only maximum and medium level are usually used, so, what about the "Boat Switch"?. That way you don't need to keep pushing the zoom key. Forward, set maximum zoom. Middle, zoom off, Back, set Medium zoom. Now Boat Switch is used for autopilot left , right.. Who uses that? :-P Anyway, the zoom as is now in CTS, with the slider, is much better than using keys. Thanks.

Hi Home Fries, Finally I decided to use CTS on different sims from DCS. At last. I started with IL-2 BOS. Took me some time to made all changes in the config, and adapt myself to use the keys different from the ones I´ve been using for 20 years. Luckily there is a "uniformity" between the keys usedby CTS profiles in DCS and lots of the keys used for CTS BOS, so it was easier for me to remember the keys and commands. BUT, also noticed there are lots of keys missing and the last update in the CTS profile was made for the 4.006 version. Now, the oficial version is 4.007. Besides the new zoom options we have now with 4.007 update, if I´m not mistaken, all those in the attached image are missing, and they are very necesary cause they are critical for engine control. Is ther any ETA for new CTS profile for IL-2 BOS? Is there any possibility to include the mentioned keys and the new zoon keystrokes?. Thanks!

Thanks, working now.

Also here, in Spain. Its asking again and again the serial numbers for all addon, and even the Keyless ones, like A-8 ! This started today, February 1st 2020.

Hi mate, I´m afraid I already tried that. I use Track IR but also I have VR, but I´ve tried all possible combinations, just in case, and no luck. The POV hat does nothing. The most evident example is the classic A-10C. If I only use CTS for mapping the POV, nothing happens, BUT if I add to the single joystick (not combined) the POV UP, Down, etc, positions, everything works as it should. I made a screenshot to illustrate this last part. I´m really lost.

Hi Home Fries, No matter what I do, trying all alternatives in the Configurator settings, Values, Global mode, and also testing all possible variables for each aircraft, I can't make TRIM to work. I tried for now F/A-18, Harrier, F-5, etc.. but it is not responding. If I don't use CTS, the Hat of my Warthog joystick is working. i.e. A-10C default profile in DCS. Also for the A-10C using CTS, trim is working perfectly, and its more noticeable because the hat moves (why that movement is not implemented on F/A-18 or Harrier?). If I'm not mistaken, the combo for trimming should be Shift key (S3) + Hat U/D/L/R (it works for the A-10C), but the trim is not working on other planes. Also, trying only to move the hat (not shifted) does nothing. Of course, the rest of controls, axis, combos, buttons, etc.. are working perfectly. No hardware problem. I´m lost. I dont know what to do. I think the trim worked before, but I cant remember the last version where it worked. Any tips? Can you take a look if it works for you on the aircraft mentioned? Thanks!

Dear Lefuneste, I love your work, first on IL-2 and now DCS. I can't fly DCS or IL-2 on VR without your mod. I want to ask you about "cockpit illumination". I know 3Dmigoto its not compatible but on the few aircraft I fly, I only detected the A-10C TGP screen flashes, but Maverick works fine, but nothing else, but what is exactly cockpit illumination option?. I don't see difference between enabling it or not except the mentioned above. Maybe its only noticeable on 2D only? If it really makes a difference in image quality or cockpit realism on VR, could be very hard for you to make 3Dmigoto compatible in future versions? Thanks in advance.

Thanks. At least, I saved 30 eur. :(

Anybody knows if this Nyogel 767A (available on Amazon) can be used without having to dismount the Warthog joystick? Just adding it externally in the "ball" that is the base of the joystick. My 2nd Warthog joystick (first died on an intense dogfight) is, from the beginning, too tight when the movement starts. Its like (I cant describe it better) like a small sticky resistance when you move it from the center. Its not a big problem but compared with the smoothness of my first one I owned, its annoying. I wonder if this miracle balsam is the solution, but I simply cant open my unit. I will break it for sure. Thanks in advance!

Dear Home, Any chance of developing a profile for the Mig 19 ? It seems to be a forgotten plane. Nobody made any TM Warthog profile for it. I bought this puppy on launch and still on ground since no profile for it. F-14 took all the love from the community. Maybe a donation is needed for helping to buy the aircraft? Thanks!

Increible trabajo. Gracias!!!

I received mine (#148 ) some days ago, but until today I had no time to install it. Perfect packaging. Basically, I followed the instructions (some details could be better explained for zero skills people like me :-)) and I got it mounted, calibrated, and working almost immediately. Did a few tests on a A-10C and SU-25T and I was in heaven. This is what I was waiting for since I bought the Warthog on its launch, years ago. It´s a must for WT users. Thanks Delta!!!!