-
Posts
314 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Maddaawg
-
Today I am reprogramming my Tartarus Pro V2 and noticed that the F8 and F11 keys are not assigned to anything in the FA-18C on my settings. Did I accidentally delete this? What was it originally, maybe it will be useful, maybe more so than a Google search that got me nowhere. Edit: I found F11, for whatever reason it didn't respond in tests -- Airport Free Camera
-
Interpreting CPU/GPU Numbers from DCS and OXRTK Overlays
Maddaawg replied to Maddaawg's topic in Virtual Reality
And what is the top window white line for? -
Interpreting CPU/GPU Numbers from DCS and OXRTK Overlays
Maddaawg replied to Maddaawg's topic in Virtual Reality
I finally saw the white line when I changed some settings and did some maneuvering, it was under the bright green line. I saw a video on YT with the same dull green line too. -
Interpreting CPU/GPU Numbers from DCS and OXRTK Overlays
Maddaawg replied to Maddaawg's topic in Virtual Reality
Funny thing is you don't see the duller green line, but I don't see the white line. -
The Pimax Crystal Light looks promising. I'm waiting for reviews comparing the Quest 3 which I have now after using the G2.
-
Can I get some help interpreting these numbers? All done on solo in VR. OXRTK 80 FPS (Q3 is set at 80fps) App CPU 1.8-1.9 Rdr CPU 5.6 App GPU 11.7ms VRAM 5.4 (48%) DCS CPU Bound in Red Frame Time 0-100 80fps Bright Green line near the bottom but no numbers Dull Green line below above. Both lines are 99% steady with only a small peak a couple times when stressing the AC and then a small yellow peak on the lower line. Under Advance CPU 1.4 - 1.5 Frame Time moving rapidly between 11 -12 Is there any way to output this to a log file vs staring at them and trying to write the numbers down in VR? I'm not having any issues but eventually want to upgrade and need to figure that out, especially since I may go with a Pimax Crystal Light soon.
-
I can't offer much help but do remember another discussion on sticking setting with the Quest. Maybe try the tray tool?
-
My CPU is only an 10900K with slower memory but the same GPU. The gauges are not always perfect, but I really don't struggle with it like I did with the G2. Maybe you need RX inserts? But also, I am pretty old school player starting with an Atari 800 and Strike Eagle and don't really expect as much as others may. It's really hard to say as I know what my VR looks like, but not yours or anyone's because we really can't show the quality of VR in a 2D world. My tolerance level may be different than yours, and that's OK so enjoy the 2D.
-
We are always trying to get better graphics in VR, but we really do it for the immersion and then we soon forget about the graphics. When I turn my head and look out the cockpit, I really feel like I'm in the cockpit.
-
I tried that version first, the problem was still there and the pen and tablet settings did not have the option to be set at application defined. The Github page for OKB says to use older versions because of that feature removal. I was having the symptoms described in his troubleshooting area that are driver related.
- 16 replies
-
- vr
- handtracking
-
(and 1 more)
Tagged with:
-
I solved it, I had to delete the assignment and redo it.
-
Ok, so I got this working. I had to go one more step backwards in the Wacom software to 6.4.4-3 from v6.4.5
- 16 replies
-
- vr
- handtracking
-
(and 1 more)
Tagged with:
-
Maybe I've forgotten, but shouldn't I be able to adjust the curves on my MFG rudder pedals? When I highlight the setting for the pedals and click on axis tune, the pop-up window does not appear and the settings for the rudder stop showing a response, i.e. the moving line representing the pedal input. This continues until I exit out of settings or select another device that does work for axis tuning such as pitch on my stick, which pops up the normal axis tune box. This is also true of slider 2 on my Orion 2 but slider 1 works fine. Several others in axis settings don't work either. What am I missing? My MFG's started acting overly sensitive after last update and making it difficult to steer.
-
Is this the G2 version with a little reset switch on the power box, give that a try. I'm sure you have cycled its power disconnected and reconnected all cables. If you lived near me (Seattle, WA), I would let you try my cable.
-
Thanks for the clarification. I worked on this for hours last night. I removed both OKB and HTCC after losing any tracking with HTCC even with OKB disabled. I might be having a Q3 hand tracking issue. When I got out of Quest Link and tested hand tracking with the auto switching and controller tapping it would only stay on for a few seconds. When I switched to manually turning it on, it worked fine. I might try VD today and see if the issue persists.
- 16 replies
-
- vr
- handtracking
-
(and 1 more)
Tagged with:
-
I haven't been able to check yet as I had a busy day. The Wacom was active as I checked and could move and write, it just didn't show that I wrote in VR. I use a Razer Tartarus Pro for the OKB commands, and that was working in DCS for other commands. I thought about the parking issue and will look more closely at it, but with OKB not active it didn't happen. I'll reset settings and look again.
- 16 replies
-
- vr
- handtracking
-
(and 1 more)
Tagged with:
-
Yea, I thought I would start here as he gets pretty busy. I'm going to figure out if there are logs first and set OKB back to default.
- 16 replies
-
- vr
- handtracking
-
(and 1 more)
Tagged with:
-
I have been using Openkneeboard successfully and I was also able to use HTCC individually. Both worked really well and then I loaded both and that when the problems started. Mostly HTCC will stop tracking my hands, but the ring-mice (Slugmouse) still worked, I just had to aim with the Q3. It almost works better since I'm not fighting both head and finger movements but some switches are difficult to lock on to. At other times OKB will stop responding to keyboard commands and the Wacom pen. It's still active as when I lean forward it zooms in, I just can't change pages. I used the OXR tool also by the dev and it flagged HTCC as needing to move to the bottom. Since then the tool has no warnings. Only HTCC and OKB are active in the OXR layers. Additionally when OKB stops working, I can close it but it won't leave memory and takes a 3 finger salute to terminate it. Any ideas? Seems like handtracking from Q3 might be the issue. All setting in the 2 apps are per the Devs instructions.
- 16 replies
-
- vr
- handtracking
-
(and 1 more)
Tagged with:
-
It looks more like a non-refundable deposit or Trial Fee as I don't see a step where you get a refund.
-
Then mine was defective, because it dropped from near the top of my stick and landed in the corner where my extrusions meet. With epoxy on the tab, it does fit nicely now.
- 350 replies
-
- hand tracked cockpit clicking
- oculus
-
(and 2 more)
Tagged with:
-
Mine broke from a 12" drop on aluminum. You keep implying that I misused them. A 12" drop is something they should survive and if it wasn't so loose on my finger it would not have dropped. I used a ring measuring tool and that ring fits snug, these are loose. I had to hold the second one tightly because they flop all around and it snapped. I took the remaining portion of that tab and easily snapped it in two just by testing its flexibility. There is no flexibility and allowing it to flex by not supporting it is asking for more breaks. I see the older designs of others have thicker tangs and wider area of connection at the base. Just another manufacturer blaming the reviewer. I hope the epoxy I used holds up, otherwise $200 into the toilet. I could have bought WinWing 15EX II throttle grip for that price and they're not going to break because I squeezed them.
- 350 replies
-
- hand tracked cockpit clicking
- oculus
-
(and 2 more)
Tagged with:
-
Get over yourself! "I have no problems from day 1, so nobody else will!" Fan Boy!
- 40 replies
-
- 3
-
-
- winwing
- winwing orion 2
-
(and 2 more)
Tagged with:
-
The last time I took the stick off the base the cable connection was very finicky. Its designed so that the pins contact firs before the barrel guides it properly. Two pins were bent on reinstall and they are incredibly weak pins which I needle nosed back into place. I see zero reason to fix what isn't broke. WinWing needs to get its act together, disconnecting every USB device except the keyboard and mouse, including the hubs was painful enough, now I have to disconnect their own parts. What's next, running jumper wires through the barrel connector of the stick directly to a USB connector on the MB? I have lots of USB devices that get firmware upgrades, not a single one of them have ever had me disconnect other USB devices or take their equipment apart.
- 40 replies
-
- winwing
- winwing orion 2
-
(and 2 more)
Tagged with:
-
It took them 24 days to respond, and this is the answer: So, no fix and I don't see any reason to change the firmware because if it fails, they are going to leave me hanging with a dead stick. No need to fix what isn't broke and I decided not to buy the F15Ex throttle grips as the throttle base also needs a firmware and it will probably get mucked up.
- 40 replies
-
- winwing
- winwing orion 2
-
(and 2 more)
Tagged with: