westr

Normandy map seems to benefit from disabling Motion reprojection, in VR where I have not seen much benefit to it in other maps. Despite keeping a steady 45fps looking left or right on the Normandy map and rolling I notice stuttering. This goes by disabling the MR. Otherwise Normandy works well and for me is the only map I can use for WW2 in VR as the channel map runs awful still after all this time. Unfortunately though the Normandy map looks outdated now, colours look wrong and it just lacks a little quality for me.

Hello purchased the above but don't seem to be getting any feedback from it in DCS does anybody have any experience of setting one of these up in DCS i have Force feedback enabled in options. It does work as well when testing with the Logitech software.

Hi everyone, without wanting to sound like a broken record, i just need some individual advice with this, but specifically regarding two particular cards in VR because spending a thousand pounds is a lot of money. So thankyou so much Derekspeare for your link its been handy getting a comparison for specific cards. What i have decided is that for it to be worth my while going from a 1080ti I want to look at least at a 2080ti or a 3070ti both are close in terms of performance according to the benchmark table provided by Derekspeare. Both similar in price. Does anybody have specific experience with these two cards in DCS with VR. I just want to run dcs VR at a steady 45fps but maintain decent graphical quality. So as an example I have run two instant action missions 1st F14 takeoff in Caucasus, F14 is one of the worst performers in VR, so with VR preset settings apart from MSAA x2 because i cant stand the jagged edges, and PD at 1.0 Steam VR PD at 100% I get 35fps at takeoff, turning left over terrain objects buildings it drops to about 30fps. Second instant action mission P-51 map free flight, channel map I have hardly used since purchasing because i cant get it to run right, 30fps dropping to 25fps flying over buildings and really starts to stutter. For me to maintain anything like 45fps i have to lower Steam VR PD to about 80% and dcs PD at 0.8.. So going by DCS players advice which of these two cards will give me the better performance for VR. And do you think they will get me to anywhere near the levels i am after. Advice is really appreciated from someone with either of these cards and which would be the best bet. And regarding optimisation I have eeked everything I can from my PC CPU is overclocked to 4.4ghz, gone with thuds VR guide and have set all my NVIDIA settings as advised etc PC Ryzen 7 3700x OC to 4.4ghz GTX 1080ti 3200 DDR4 RAM 32GB HP REVERB G1

What i would like to do next is change some of the cluster munitions for the BL-755. On the Tornado it is there on one of the weapon load presets but you cant select the weapon in ME, but you can physically see the weapon on the aircraft. I've looked everywhere in shapes for the file but unfortunately cant find it. If anyone knows where the file is I would appreciate it. You can see the BL755 in the encyclopaedia.

looking to do this for the harrier it seems that the dcs structure is completely different now does anybody know if this still can be done sidearms changed to alarms visually that is? managed to change the model to an alarm looks so cool, t-alarm.edm and agm-122.edm is now in dcs\bazar\world\shapes dont know how to change the data yet for the alarm but like i say it looks really good and more appropriate for an RAF harrier

please heatblur? dont think its too unreasonable to ask for some form of update on this. Originally it was intended to be included in March though i accept not promised.

i never use motion smoothing always have found it judders when looking to the side for me. I tend to stick to the same settings have just never seen a difference in fps with the kegertys mod.

It’s ok I had an old version and have since found the latest. Out of interest does anyone else find kegetys mod does not provide any performance gain. I read many people that say they get a performance gain. Sadly for me it has never worked.

Thanks as always lufeneste

6800 I found was out of stock thought it was to good to be true. So cheapest 6800 is actually £1000. guess I’ll keep looking and waiting found a 3060 ti for £700 but looking at the chart doesn’t really seem like a step forward enough to warrant the change. Thanks for the advice about the cpu btw. A 5600X can be picked up for a fairly cheap price.

Hi lefuneste so looking back on this page you say about installing Kegetys mod before installing 3dmigoto mod. Ive tried to install kegetys mod but dcs wont load because of errors, i downloaded what i can see is the latest version 2.7.0.4625 , does anyone know of a newer version for latest OB. edit: I've found lastest Kegetys mod and have dcs running now and installed your update for Kegeteys mod, sadly 3d migoto vr mod still doesn't show when i use shift + F7.

I can get a Ryzen 9 5900x for £490 a 6800 gpu is £680 which is the cheapest I’ve found. So £200 more but if I found noticeable improvement it’s something I would consider but I read such conflicting reports some saying It wouldn’t be worth me changing a 1080ti, would like to know what would give me more of a performance boost for VR. Jumping to a 5900x cpu or buying say a Rx 6800 gpu

Have a really annoying situation where this mod was working on latest OB release but ive had to reinstall dcs, now no longer working.

So looking at this situation now. And being reluctant pay pay £1000 on a gpu. I’m considering selling some stuff of mine I have an old Ryzen 7 2700x cpu I currently use a Ryzen 7 3700x and an X470 main board. i also have an old oculus headset. If I sell all this I wouldn’t need to put much more together to get myself a Ryzen 5900x and compatible board. Im hoping I would see a marked improvement in VR performance with a step forward in processor performance.

ok, so looking even 3070s are fetching over £900 I See. part of me is thinking will the Vulkan implementation bring acceptable performance gain to make it worth waiting. But this still could be a way off.

Hi as title suggests. Think my 1080 ti 11gb is holding me back. Since the new clouds and maps I’m starting to struggle to get the performance in vr whilst maintaining what I consider acceptable levels of visual quality. I don’t want to spend a £1000 on a new graphics card. So just wanted to know from peoples experience what card I can get that will give me an improvement but not cost me £1000. RTX 2080 ti is coming in at £1000. There’ are alternatives that are cheaper but just want to know if they would give me a performance step? Advice and experience is welcome. Im using HP reverb G1 Ryzen 7 3700x overclocked to 4.3ghz 32gb ddr4 ram at 3200 ghz

Any updates on this now that Forrestal has been released?

A much needed improvement thanks very much.

i have the same issue no trim despite what controls I map on keyboard or stick. TM warthog Stick and Throttle HP Reverb.

Thanks

Could someone with the hind just confirm if VR pilot has been added on early release? Thanks.

Im not able to communicate in the viper anymore on hard comms, is there a bug atm in 2.7? Ive just run a repair but still have the same problem, I'm going through the procedures I've always used for comms in the viper and they have always previously worked.

Hi do you have a link to your mod?

I think the water textures are back after the last update. Looks that way too me, I can see the textures at altitude now.

The F14 is comparable with the rest I get 45fps 90% of the time however I’ve probably lost 5fps since the new clouds release