Florence201

Ok, so there are 2 Silkworm radars and 2 silkworm launchers at both Wp3&4. You must destroy all 8 for mission success.

Sounds like a daft question, but you are taxiing to the correct runway right? They generally won't follow if you don't. If on the easterly runway, then taxi forward and immediately right along the apron If on the westerly, taxi forward then left and onto the taxiway. Otherwise, not sure why you're having that issue

Easy way is open each mission in the ME and select the asset page (shows what's in the mission). Check the aircraft tab, then look at the right hand column and change anything that states it's a MOD to whatever you want (P3 and C5 spring instantly to mind).

SP question: Yes, as it's a matter of timing. You have to allow the F/A-18's time to get airborne, then strike the associated SAM sites around the Silkworm installations. Silkworm Questions: You need to take out all 4 components of both installations to complete the mission Wingman Question: Never had that happen. Kish can be slow in giving take off clearance, so i normally just ask once, then take the runway. It forces them to answer. Noticed this with Nellis on NTTR map too.

Thanks to those that are showing appreciation for all the hard work! :thumbup:

I just released an F-16C campaign today. Check the Viper front page on here

Frustrated with Iran's constant saber rattling, Syria and Iraq have formed an unprecedented Alliance and moved on western Iran. World leaders have watched on with amazement, as the Arab Alliance has slowly taken territory in Western Iran, despite the Ayatollah putting all the Iranian Military into stopping the push. The Arab Alliance has now taken land as far east as Bakhtegan Lake, East of Shiraz Airfield (which is also in the hands of the Alliance). The Iranian Leadership has swallowed it's pride and reached out to Western Governments, in the hope that with "The Great Satan" helping them out, this Alliance can be pushed back into Iraq With Shiraz Airfield firmly under Alliance control, they are pounding Iranian ground forces, with daily air attacks. Syrian and Iraqi SU24s, are bombing troops, driving them back despite Iranian air support. Arab Alliance CAP's have taken out a large percentage of Iranian fighters, forcing the Ayatollahs hand into pleading for help. Your Squadron is the first ever US unit to deploy to Iranian soil, so be watchful. The Iranian Leadership has put restrictions on where Western forces can transit and operate over their territory. As such, you are to be mindful of ingress and egress routes, so as not to upset the host nation. 13 Mission Campaign centered around Ops, based out of Kish International Airfield in Iran. Varied missions of A-A and A-G, CAS and an Anti-Ship Strike mission. As always, constructive comments and suggests appreciated. https://www.digitalcombatsimulator.com/en/files/3308267/

Plenty of user generated campaigns out there. I've certainly posted a few. Here's a few to keep you going. https://www.digitalcombatsimulator.com/en/files/3307739/ https://www.digitalcombatsimulator.com/en/files/3306001/ https://www.digitalcombatsimulator.com/en/files/3301870/

I've attached the new COMM.lua. Make a copy of your old one before replacing. I still had issues with getting them to refuel at night though. comm.lua

Here's the link for the updated 2.5.6 version: https://www.digitalcombatsimulator.com/en/files/3304451/

The stable version I have is 25 November 2019

I use T16X for tanker it works fine for me.

I'll install and give it a go buddy thanks :thumbup:

I can't send wingmen to the tanker. It used to be in the F3 GO TO menu for other aircraft. They now flame out and eject far too often.

It will work without the skins (although adds realism), but you will need the Military Aircraft Mod and Carrier Mod to make all missions work

Definitely a good idea!

You can fly as another position, i've just built a mission for a campaign doing just that. Al i then did is add radio transmissions to tie in the fact i couldn't make them myself as number 2. The graduating to flight lead is probably a good training campaign idea. I'll have a think and maybe start one off. There was a host of Basic and Advanced flight training campaigns done for the A-10C i remember. Might be as involved but will give it a go.

Frustrated with Iran's constant saber rattling, Syria and Iraq have formed an unprecedented Alliance and moved on western Iran. World leaders have watched on with amazement, as the Arab Alliance has slowly taken territory in Western Iran, despite the Ayatollah putting all the Iranian Military into stopping the push. The Arab Alliance has now taken land as far east as Bakhtegan Lake, East of Shiraz Airfield (which is also in the hands of the Alliance). The Iranian Leadership has swallowed it's pride and reached out to Western Governments, in the hope that with "The Great Satan" helping them out, this Alliance can be pushed back into Iraq. With Shiraz Airfield firmly under Alliance control, they are pounding Iranian ground forces, with daily air attacks. Syrian and Iraqi SU24s, are bombing troops, driving them back despite Iranian air support. Arab Alliance CAP's have taken out a large percentage of Iranian fighters, forcing the Ayatollahs hand into pleading for help. The John C Stennis CBG has been diverted in the Arabian Gulf, as the first of Western Support forces. The Iranian Leadership has put restrictions on where Western forces can transit and operate over their territory. As such, you are to be mindful of ingress and egress routes, so as not to upset the host nation. https://www.digitalcombatsimulator.com/en/files/3307920/

New version 2.0 released sunday 2 Feb

Thanks to all

Is there a thread for requesting skins from members? I'm trying to find Iraq and Syrian skins for a campaign. Specifically, the C-130 and MiG 29 for either country. Thanks

10 missions of A-A, A-G and a Harpoon sortie too. Lots of custom made voice overs and trigger points, so stick to the Nav Waypoints as precisely as possible. Airboss script used throughout the campaign for added realism. As always, constructive comments and suggests appreciated. :pilotfly: Frustrated with Iran's constant saber rattling, Syria and Iraq have formed an unprecedented Alliance and moved on western Iran. World leaders have watched on with amazement, as the Arab Alliance has slowly taken territory in Western Iran, despite the Ayatollah putting all the Iranian Military into stopping the push. The Arab Alliance has now taken land as far east as Bakhtegan Lake, East of Shiraz Airfield (which is also in the hands of the Alliance). The Iranian Leadership has swallowed it's pride and reached out to Western Governments, in the hope that with "The Great Satan" helping them out, this Alliance can be pushed back into Iraq. With Shiraz Airfield firmly under Alliance control, they are pounding Iranian ground forces, with daily air attacks. Syrian and Iraqi SU24s, are bombing troops, driving them back despite Iranian air support. Arab Alliance CAP's have taken out a large percentage of Iranian fighters, forcing the Ayatollahs hand into pleading for help. The John C Stennis CBG has been diverted in the Arabian Gulf, as the first of Western Support forces. The Iranian Leadership has put restrictions on where Western forces can transit and operate over their territory. As such, you are to be mindful of ingress and egress routes, so as not to upset the host nation. https://www.digitalcombatsimulator.com/en/files/3307739/

Happy to do some British voices if you desire?

You could have a moving zone for a unit. Then when a stipulated unit (and you could have lots of clones of this) enters said moving unit, push a message to your flight and create an .ogg audio file to transmit over a radio freq (or just play sound over everything so as not to get cut out by DCS radio transmissions). That's kind of how i do it.

It all depends on whether they are orbiting (AWACS or CAP like). If they have reached the orbit WP, then no FP will be shown.