THERION

There is a problem with the flight model of the Gazelle. Since their last patch, I cannot take off anymore without damaging the helicopter. It not flyable anymore for me. I did not change anything to the configuration of the module. And by the way, it is not only on the Syria map, it happens also on the Caucasus map. Try the build-in mission "Improve your flight skills" (or something similar), it's the last mission listed for the Caucasus map. Impossible to take off without the helicopter being pivoted left and right before touching the ground either with the tail rotor or main rotor. And yes, I have rudder pedals. It does not happen with the Huey nor with the Hind.

Apparently...

Maybe you forgot to remove the wheel chocks? Tell the ground crew to remove the wheel chocks... you can also check via F2 view, if the wheel chocks are removed.

Hi 1. Make sure your default X56 profile is clean (empty). 2. Always use the same USB port. WIN sometimes likes to mess with the ports, hence your device goes wonky. 3. Test your device under WIN. If it works correctly there, you should be fine in DCS. 4. Check your device profile and settings in DCS. Maybe you have some errors in the key bindings? 5. If possible, use a powered USB hub. Cheerio

Are you trying to install and run DCS on a MAC? I don't know if DCS will work on a MAC...

Did you open an account here in DCS? I think you need an account - even without buying anything - to log into the game once correctly installed. DCS download installs the free DCS world with 2 plane modules (T for Training) like the SU-25T and the T-51 if I remember correctly.

2 or even 5 for me

Dito! Habe auch nicht alles auf max. Stufe, aber trotzdem schön und flüssig, fix auf 60 fps.

Once you run the updater, all components will be updated - there are no two separate update methods. Just run the updater like before we had MT and everything is fine.

You compare a night of fun with your wife and the new Normandy map? Puh, what a tragedy...

This application does have an impact on the fly by wire system, namely between light and heavy load. So, if you carry some bombs and fuel tanks, you'd rather choose the position "Charges" lower switch position and for A/A missions the upper switch position. This changes the G-limits of your plane.

As far as I'm a aware, you have to open your canopy.

Where can I download the latest version? Just tried to download from the R/Hoggit link shared above, but looks to be the same version I already downloaded on 23/01/2023? Any information about this? Thank you. Cheers

And ugly too - I hate those satellite pictures used to make a new map. That's what I exactly feel and perceive when I fly over the South Atlantic map and it reminds me the time of those bloody and fugly map in Microsofts Combat Simulator. I thought this was long gone, but no - here we are.

Here you are: Cheers

I'm sure, you will provide us a much better mod... I'm very eager to try your enhanced mod... thank you so much in advance!!! I can't wait for your version... Cheers

Hi, I just had another go with the SA map today - sigh - the performance of this map is still very bad on my system. I do not understand why? Take off with the Mirage F1 (Instant Action - Take off mission) on the runway I get ~45 fps, after gaining some altitude (3000 ft) I get ~60 fps, turning N heading for Santa Cruz landing strip at 3000 - 6000 ft I have a very decent and stable 60 fps and good frame times, but if I go for a low pass 300 ft over this very, very empty (wasteland?) following an empty road I get ~15 fps. I do not understand this behaviour. With my system, same configuration of DCS I get ~60 fps all the time with good frame times over Syria, Caucasus, Gulf and Nevada map. Especially Syria map which is quite demanding regarding all the objects it has, runs very well on my system (~60 fps) with no stutters etc. My system's specs are as following: Motherboard: Asus TUF GAMING Z590-PLUS CPU: 11th Gen i5-11600K @ 4.90 GHz GPU: MSI NVIDIA GeForce GTX 1070 / 8 GB VRAM RAM: 64 GB of DDR4 @ 3200 MHz Monitor: ASUS 27" 1920 x 1080 @ 60 Hz All drivers are up to date. My NVidia Control Panel settings for DCS: My settings for DCS: Any suggestions or some secret hint? Thanks and cheers

Your idea and intentions are very good and would make sense - the only thing I'm a little bit worried about is: Does ED want to do that? It might not be their interest to do such a benchmark, I'm afraid. It might reveal that their actual engine is some kind of outdated or at least badly optimized. Of course, this is my opinion and based on all those performance issues reported by people using top edge hardware. And on top of this, have a look at their system requirements published on their store page - these are not very accurate and make me think of some kind of "bait" or "false promise". Just my thoughts

Wow, just great! It seems that you are very modest, way too modest if you ask me. Watching the video and thinking about your statement that this is still - STILL - work in progress??? Man, you and your team do a really fantastic job. WIP? Are you kidding? It already looks fantastic - very immersive! And if you tell me that your map will perform like the Syrian map - well, count me in. Thank you and cheers

Just check your key bindings for the Mirage F1 AND make sure the keyboard column is NOT empty. This happened to me already twice after some updates - keyboard column in the key binding setup was completely empty! So, if it's the case, just click on the dropdown arrow on the header of the keyboard column and select "reset to default keys" and all should work correctly again. I know, it is very annoying, but it seems to happen after updates related to the Mirage F1. Cheers

Well, I think it would be a good & clever move from RAZBAM to optimize / fix the map first, before adding other things and features to it, don't you think? I know, the map is still WIP / EA, but hey, this map has tremendous performance issues! And compared to the EA of the Syrian map then, although known for having some performance issue too, it ran way better with far more objects on it. This is ridiculous, but the actual SA map is more or less wasteland and performance is already really bad, bad, bad. Oh, and btw. I'm a pancake pilot, so I don't even dare to imagine how VR pilots are struggling with it. Cheers

Maybe some kind of Halloween/Zombie feature to kick-off "Halloween" days?

Könnte es sein, dass Du eventuell bei Deiner vorherigen Installation Mods installiert hattest? Schau doch bitte einmal nach, ob noch irgendwelche Restdateien in Deinem persönlichen Verzeichnis liegen. (\\Saved Games\DCS\Mods..)

PBR = physically based rendering

Super screens - une petite question: "Est-ce donc maintenant possible de catapulter le RAFALE sur les PA comme p.ex. les F-18 et F-14?"