The_Nephilim

yes the thing with the G2 and good headtracking is to have good lighting and something for the cameras to pick up on. ie no bare walls..

Well I made a mistake on the 4070ti I thought it was a 256bit and thought that would be enough power, I was wrong. and you forgot to add yes it is a step up in performance and also a step up in price, I spent what I could.. and yes I currently have the 4070ti and might wait out the 5xxxx series..

well I used to see the flicker when I 1st got the headset but now I dont notice it at all. I guess I am lucky in that regard but either way I am squeaking all I can out of the 4070 right now maybe I should have gotten the 4080super??

Well I went back and reschooled myself about VR and the consensus seems to favor maintaining 90+FPS @ 90Hz. Well that is asking alot from DCS and my 4070Ti but I went ahaead and lowered the Resolution to 50% of the native rez of 4320. Now with that I was able to maintain 90+FPS but probally barely as the Frametime was 10.2ms. maybe with a newer CPU I could squeeze a bit more FPS out of the 4070Ti but right now I will have to wait until I can upgrade the mobo and CPU.. It might be possible to run @4320Rez in the G2 with a 4090 but I still say it would be hard pressed to maintain 11.1ms FrameTime.. I think the 5080 would be what I need maybe a 5070ti Super lol!! I will try running it @ 90hz but I hope we get some more VR Improvements as it still seems to need some work.. but they were saying running the lower Hz users can be more prone to nausea and such things.. I don't think it looks too bad at 50% rez but I sure did like the 70% I was getting.. here are my new settings Specs in Sig and running a 4070Ti with a Reverb G2 @ 50% native rez..

Hi Jive, I tried DLSS and it looked wierd to me IDK maybe I'll give it another go.. I will need to check my Frametimes but they should be pretty good now but will need to see what they are and adjust from there .. thnx.. I will look into it.. EDIT: I will try thisagain as I thought to maintain 60fps I needed to keep FrameTime under 13.6 but it appears I was wrong and it is really 16.7ms FT.. so I will probally go even higher then my current settings as I was getting about 12.4ms FT.. so I am good up to probally 15 to keep it steady under 16.7ms..

maybe your VRM's are overheating and it declocks the CPU? or the vrm's in the GPU??

Yes I since redid my settings and I am on med for distance and I think I still am on High with shadows.. I will test the settings to see what the difference is in FPS.. And yes lowering the resolution does wonders for the FPS and @80% with DLAA it still looks very good IMHO YMMV.. Well it appears the DLAA is a very big hit in FPS, I was getting about -18FPS Less with it on, MSAA was not as bad but still high at 14FPS less.. I am looking to settle at 70% Rez in the G2 and 60Hz. I also have most of my settings on Med. now and it sill is able to maintain about 85-88FPS and ruuning at 60 Hz I can maintain butter smooth frames above 60FPS.. Looking for more might have needed a Super ti or 4080/90.. but this is good for me and I can keep a very nice looking game and more importantly it is smooth no mater where I am in the game or look..

Hey Everybody, I just purchased a 4070ti and got it today and was doing some tests with it. So far it is doing fine with 80% Native rez and running 60Hz. I will post a pic of my settings but they are pretty high and it just runs perfect.. I am probally going to be tweaking for a bit just taking a break right now but so far it seems to be working well @60HZ and 80% rez of the Reverb G2.. Now I could try running 90 hz but I am thinking I will need to lower the rez quite a bit more but @ 80% ity does not look bad an I was using DLAA as well No DLSS.. I think the one thing holding this card back is the bus interface I thought it was higher but it is 192bit. I would imaging that is what holds it back from running more then 90FPS.. Also I am not running Motion Reprojection. if I did I would imagine I could definetely run 100% Rez. I just might try that and see what happens.. But since before I was running 30% the bump up to 80% is like worlds different and with the bump in settings it never looked better.. So for now the 4070Ti is performing better then I thought it would. I also OC the snot out of it and got 3.045ghz on the core clcok and 700mhz more on the memory.. and the temp is about 72c which is fine. so back to the tweaking and here are my system settings in DCS:

Well I seen it happen more then once. I been saying in VR if you cannot maintain your Hz in the FPS rate you will see stutter. I am able to keep above 60FPS as I only run 60hz and do not get much stutter. I play online as well and rarely get stutter. but I am not running 100% REz in the headset which allows me to maintain my plus Hz rate.. I been seeing some users catch on to this trick. in VR it is especially noticable when your FPS fall below the Hz rate..

well which sound card do you use? I do not have this happen to me when I play MP.

I thought there was a setting to switch which eye it is in??

+1 and yes the missile is bugged

Well like I was saying it is possible to probally fix it but it really depends on what is wrong with it and the skill level of the person doing the diagnosis and fixing..the process is simple like most anything process of elimination. From what I know I would check the basics. the one thing you can check but you may need a ohm meter to check the Power supply. or if the light comes on the little box on the cable.. having to try and fix what is inside that box will take some knowhow. if you dont knowhow then it may not be fixable by you.. I know for one IDK how to fix it so I would just buy a new cable.. but like you said for you they seem spendy. But you said you have 2 broken cables have you checked maybe the headset it self is broke? Do you have a friend with a g2 that lives close by that way you can check a confirmed working headset with your cables and his? The chance both cables are broke could be an unlikely possibility but not impossible.. IF you have a working headset I would test your cables with that headset. I mean what makes you think it is the cables does the headset do anything or throw and error code or similar?

Well yes soldering is one thing but to have the electronics know how is another.. IF anything basic I know the G2 has the cable with a little box which gets power from a power supply, I mean barring the cables being broke or cut or similar you could check to make sure the PS is putting out the correct voltage and all. then hopefully your people who can solder also have experience diagnosing electronic issues as the common cause could be that little box on the cable..

Well there is a way to fix it but one would first need to be technically informed how to do so and have a good solder skills.. if you have neither there is probally little hope. But what do you think is wrong with the cable?

Well I have heard that while using the F10 map before you go back to F1 zoom back in on your position. something about it loading all the texturesandsuch when zoomed out and going back into F1 view..

well I am not seeming to have many issues, works pretty decent here. I guess some improvements would be helpfull but you have to make some adjustments. Most problems in VR Stem from users trying to run max setttings with SS at 150% just not going to happen.. but I guess most users problems stems from that alone.. not all but some..

Hi Loukuins, Is your PC in your sig there?? IF so that system is a bit old for the current version of DCS.. are you playing in VR ?

Well I watched your video and it seemed to have gotten past that point with the nav fix but not sure if maybe I have the wrong function for the fix or was it changed or something.. Thnx for looking into hopefully you can figure what is going on. I did see the diagram in the video and it showed the 1st detent but I am not clear on what the 2nd detent is supposed to be for the control function in DCS.

use the following radio and bind a different key to it "FR22 PTT".. ********************************************************************************************************** Hey Rudel, I am having an issue with the mission Pre-Planned Nav I get to step 8 where I am supposed to make the fix over B1 and I hold the trigger and I get the E1 showing it is ready for the fix but when I press the 2nd detent in my 2 stage trigger button to do the TV Fix it does not continue in the mission and I am unsure if I do the fix to early or I have the wrong button press?? Thank you for these training mission. I can not wait untl I get the Kola map to try them there..

OK, OK, I screwed the pooch. I found my error, it appears the 2nd switch for the lights is a 3 position switch. and I think I flicked it in the wrong direction, I think it was ment to be switched to the left I was going to the right.. and when I switched it back to the left it was in the center so I had to switch it one more time to get it correct so that is what I did wrong.. Still unsure how I got passed it before maybe I clcicked it to the left mindlessly and did not realise it.. OK PRoblem solved thank you.. back to training for the Kola..

well I can add a trk file but it worked before and I have not changed anything besides add those few taz1004 mods but I since removed them and did a clean and repair.. Give me a few minutes I will add a trk file hopefully..

Hey Guys, I wanted to get back into the viggen so I started with the cold start training mission. well it worked fine for 5 times now I was doing this mission last night and this afternoon, well I cam back after Dinner and the mission is not procedding past where I press the keyboard after I turn on the 4 light switches.. Now I tried restarting the PC, Doing a Clean and repair with slow repair enabled and it is still broke.. I am just not understanding why it was working then after running the mission a few times it breaks? I will post me DCS.Log if it will help but not sure but I will post it, my specs are in the sigs, there is nothing wrong with my PC and the sim runs just fine no issues just the fact that the training mission is now broke. For the record I tried some other training missions and they seemed fine as I was doing most of them.. this was the latest log.. andif the logs shows mods I removed them completely then did the clean and repair.. so it might not be any mods fault, shouldn't the clean and repair fix any issues? maybe I should try a fresh install?? dcs.log

maybe it is a crypto miner or similar. what did you use to check your GPU Usage? I can check my steam link..

well you can definetely notice the darker image. I may just have to go with the the Crystal light with the dimming.. a little extra but looks like it might be worth it.. thank you