falcon_120

+1 Enviado desde mi ELE-L29 mediante Tapatalk

+1 Enviado desde mi ELE-L29 mediante Tapatalk

Thanks guys I've tested and going SCS right (or left if rdr atck is on left) does in fact commands a fast acquisition to stt, just what I needed. Regards, Enviado desde mi ELE-L29 mediante Tapatalk

I think a group of E hornets with their AESA, MSI combination can do very nasty things to a group of eagles even in Bvr, the same can be applied the other way. But I see it close, with modern avionics sheer speed is not so important anymore, it's a game of Electronic attack, EW, towed decoys and shooting without activating your radar (a buddy will "buddy dessignate" for you if you allow me the analogy with buddy lasing). So it's more about which have the better tactics and better works their systems before the other that day. Enviado desde mi ELE-L29 mediante Tapatalk

No ecm but we've seen a bit of the RWR page whatever it's called in the F15E SE. Look at 14:30 in the video when he calls up the page on the right mfd. Enviado desde mi ELE-L29 mediante Tapatalk

What exactly do you mean by better simulated ALR67? Just curious not saying you are wrong. From my experience they work similar, and in the case of Razbam RWR it annoys me a little how is simulated in terms of precision, as you get a perfect azimuth all of the time. Which surprise me given how well they have simulated aspect of radars. In this regard I think Heatblur is the reference of a good RWR simulation and it's limitations in precision in azimuth. Enviado desde mi ELE-L29 mediante Tapatalk

is that so? [emoji2955] I guess it could make sense the optimization towards A2G instead of A2A, but curious to know the sources of that statement. Enviado desde mi ELE-L29 mediante Tapatalk

I dont complain, it's a new life for the F15 as it's the only plane (except the F14/Phoenix combo) able to do very long range; 50/60nm, amraam shots, thus regaining their BVR 1st place again over the viper/hornet. Obviously not having a link16 it's a big handicap that oblige you so much harder to work on the SA from other sources, but it's fun. But what is important is that between 60nm and 35 nm, and above angles 30, the eagle can dispute the sky and the F16/f18 cannot fight back unless they go low and put themselves in a defensive position. Also apparently the F15 does not currently suffer from those absurd look-down penalties applied to the F16/f18 radars. Enviado desde mi ELE-L29 mediante Tapatalk

It's not this edmuss. It's definetely something holding MR. The frame throttling is like regular, each X ms and always the same numbers. Besides In the scenario I'm testing I get stable >80fps with MR off. not even close to 60fps when I turning and flying real low. I've been searching the internet and I've found some other people with the same problems (https://forums.flightsimulator.com/t/vr-reverb-g2-wmr-performance-motion-reprojection-cpu-issues-overclocking/497696/25 ). The result of what we are experiencing looks like this (see image attached). As that post says, sometimes just going into the task manager and changing DCS priority from medium to high or otherwise makes MR kick in and I get a perfect experience for several minutes in the same scenario is giving me headache with this lost frames. Enviado desde mi ELE-L29 mediante Tapatalk

I am recently having a lot of problems with Openxr motion reprojection, experiencing something like you describe. Basically i have a butter smooth 45 fps experience and everynow and then is like the motion reprojection start to fail, and i get like 39-41-45-39-41-45 in the frame counter during what can be some minutes, and MR never goes to 30 fps. What you get is like 200 ms of everything fluid and after that a lost frame; which affects not only to the scenery but also to the whole cockpit which is a sh*t and disturbing. Strange enough, unistalling openxr toolkit, launching from steamvr with runtime set to steamvr instead of openxr, is letting me reduce this stutters a lot. I have long periods of stutter free gameplay now (stable 45 fps) even in multiplayer. I have also unsitalled things like nvidia geforce experience, which for some reason was taking to much CPU on my rig. Specs: Ryzen 5600x, rtx 3090, DDR4 2333 32gb.

Since I haven't been able to totally resolve this issue, sometimes is up and sometimes is not, I was wondering, is there any other motion reprojection runtime avaliable which I can try? If I understand correctly using steamvr instead of OXR use the same MR, just not directly talking through the API but using a middle man for several calls right? I've tested with SteamVR and I get similar results which is consistent with it. Maybe there is a mod somewhere using oculus ASW for the reverb g2, one only can wish... Enviado desde mi ELE-L29 mediante Tapatalk

I really think this is coming in 2022. I've seen a lot of items in a very good state already; although truth be told we've seen mostly clips of them and some YouTube tutorial, but overall: -3D model seems ready. -3D cockpit model ready -A2G radar gmti and mapping modes are working (unknown state) -Weapon control logic mostly completed based on tutorials -Navigation system in a very good Early state -Working A2A radar; at least RWS mode -Wing flex, shaking and vapors are there -Flir pod is there at least in a Alpha state, but I'm sure that will be easy given experience on the harrier litening -TFR is there at least in Alpha state Things I have not seen: -Link 16 -Iff -JHMCS But those could come later, hell I would be fine with a first release that comes with basic A2A and only dumb bombing modes. Enviado desde mi ELE-L29 mediante Tapatalk

understood! Enviado desde mi ELE-L29 mediante Tapatalk

Thanks! I will just try to do some other system hygiene stuff (gpu drivers, maybe reinstalling OS, etc....). Thanks a lot for all the help. Enviado desde mi ELE-L29 mediante Tapatalk I wouldnt argue with you on that, but I've been a happy OXR MR user for several months with my 1080ti, and everything was really smooth. No strange cockpits spikes/stutters, just the normal Shimmering of wingtip and maybe the edge of the cockpit every now and then. Maybe I will try to lower all the settings in DCS as I had it on that Gpu to see if that really makes any difference at all with MR Enviado desde mi ELE-L29 mediante Tapatalk

I've turned on both overlays and i've gather the following info for reference in caucasus with MR on: Caucasus JF17 free flight: Post CPU/GPU: 0,54/4ms AppGpu: 14 ms AppCPU: 9ms F18 free flight: Post CPU/GPU: 0,54/3,2ms AppGpu: 11 ms AppCPU: 7,4ms F16 free flight caucasus_ Post CPU/GPU: 0,54/4ms AppGpu: 16 ms AppCPU: 7ms

Just tried that, no improvement, definetely somethings is preventing Mr from kicking in in all its glory... :( Enviado desde mi ELE-L29 mediante Tapatalk

So, It seems i have found something, it turns out that opening up ROG CPU-Z monitoring tool my CPU core speed is constantly changing speed between 3600Mhz and 4600 mhz, by alt tabbing in and out of the mission somehow i've managed to make my CPU stable in turbo mode (4,6ghz) and during some minutes i have a stable, stutter free Motion reprojection in the mission. SO it turns out that MR is working perfectly, is my CPU throttling back and forth the whole mission. For some reason my MB or CPU thinks that while gaming it does not need to go full speed, i need to find how to change that now... EDIT: Not sure anyway if that is the problem as the same behavior happens with MR off but I get steady 90 fps, also i've read that is normal Precision boost override behavior in the Ryzen 5600x

Any rtx 3090 user that has tested differences in performance/visual quality between OXR FSR and NIS modes? I'm curious of any head ups as to which one is better for that Gpu being nvidia. Enviado desde mi ELE-L29 mediante Tapatalk

I will! Where should I look to enable them? I guess the 1st one is from theOXR overlay in-game and the second one from Openxr for WMR app? Enviado desde mi ELE-L29 mediante Tapatalk

I have tried locking MR to 45, i've only tested it quickly since it appeared to suffer from the same issues, also i'm not too keen of locking it as i guess in MP in busy server i will need the 30 FPS motion reprojection. I will test it this afternoon in more detail to see if i get any benefit. The thing that is puzzling me the most, is that MR has been working flawlessly on my system always, its been since i changed the GPU that i'm seeing this behavior. Just throwing some crazy ideas around, i know i've updated OpenComposite after changing the GPU and also Openxr Toolkit, maybe reverting to a previous version will do the trick...

Hello everyone, I've recently upgraded my GPU from a GTX 1080 TI, to a new EVGA RTX 3090 FTW3. Nothing else in my computer has changed. Once changed, i've started the process of setting everything up to enjoy again DCS with the new card; updating drivers, installing evga software, updating DCS settings for the new card... So once everything was ready i've started to test how smooth everything goes to be sure I'm where i want it to be, basically I am using 2 missions as tests bed, the F18 Hornet Caucasus free flight and the F16 Siria Free flight missions. With these missions i get the following results: Caucasus F18 free flight i get a steady 90 FPS with my options, with the F16 Siria Free flight i get a mostly steady 60 FPS during the begining of the mission at low level near damascus? (the big city of the mission), and it goes up if i climb. So everything is good and i decide to turn on Motion reprojection through the Openxr overlay in DCS, I set it to MR ON and unlocked. Everything else turned off (No FSR/NIS/CAS, tested with FFR in Quality/wide on and Off with similiar results) results: -F16 Siria Free flight: At least during the beginning of the mission (not tested more than 2 min into the mission) everything is smooth as butter, steady 45 FPS; the DCS Fps counter shows 45 and sometimes 44 for a second, i can look into the town and everything seems smooth, also within the cockpit. -F18 Caucasus free flight mission (also teste later with the A10 Siria free flight with same results): The motion reprojection does not work "well", instead of showing a constant 45 FPS, its showing something like 45,43,41,45,43,45,44,41, and the worst part is that when moving my head around the F18 cockpit the whole cockpit stutters. Its like when moving my head some frames are lost and i jump to a next frame. This is not the normal shimmering at the edges of the cockpit that you get with MR, but instead is like the whole cockpit jumps from one frame to the other when moving my head from left to right or right to left. I'm scratching my head here, since i've been using Openxr MR for more than 1 year on my 1080 ti without this happening ever. If i turn off MR for that mission (F18 Caucasus free flight) i get steady 90 fps again. I'm a bit lost of what is causing this strange behavior. Trying to solve the issue ive done the following: -Turn off HPET -Update Openxr TK to latest version -download latest version of openComposite -Reducing setting in DCS (No shadows, no MSAA, no AA, PD is always at 1.0 and 100% CRM in SteamVR and OXR TK, Ground textures to low) -Put DCS.exe, OpenComposite priority to high (although not sure if i've done this alright, i should review it again) I've seen that sometimes if i alt-tab or look into the task manager and jump in, the MR seems to "kick in" for some time and i get the steady 45 FPS with no cockpit jumps/stutter. My system: Ryzen 5600x, RTX 3090 FTW3 Ultra, ASUS ROG STRIX B550-F Gaming, 32 GB RAM Corsair vengance LPX DDR4, PSU Corsair HX1000 Any help is appreciated.

It is a amazing piece of software indeed. Glad to hear there is an intention to keep it updated. Kudos to the main developer and the caring community. Enviado desde mi ELE-L29 mediante Tapatalk

Oh I see, thanks!!

Hello, For the last 2 days i've having an integrity check failure, with following indications: mods/aircraft/fa-18c/cockpit/scripts/device_init.lua mods/aircraft/ah-64d/cockpit/scripts/device_init.lua However if a delete those files, i will not see the cockpit of the F18 and AH64 next time i enter a mission. Any solution?

yeah I was aware of that, but I understand that will not affect the warranty of their already produced cards. I'm fine if they send me the same card had mine has a problem(fingers crossed I don't need it). Enviado desde mi ELE-L29 mediante Tapatalk