[Official] SimShaker for Aviators

Razorback · June 22, 2021

So, as many of you, I encountered an issue with SSA after the install of the Hind module in EA (DCS 2.7 OB)

I have installed the SSA beta2.2.3 version from f4I0 (by the way thx a lot for your work !!).

But At the end I am encountering the same issue.

I didn't uninstalled the previous stable installed version, could that be the cause ?

Thx a lot for the support...

Edited June 22, 2021 by Razorback

FoxTwo · June 22, 2021

Make sure you're running the beta and not the stable version then. The only reason you should still be seeing an error message is if you're running the wrong version.

Topgun505 · June 22, 2021

On 6/19/2021 at 5:40 AM, f4l0 said:

Here it is,

the new SSA beta 2.2.3 with the Hind. (https://1drv.ms/u/s!AldPAmClTeGqgRTg0X5Dm56J689L?e=17kiRF) Due to very hot weather I was not able to test everything in detail. It's already 32°C or 90°F in my room... I noticed the cannon effect does not work. DCS does not report the correct number of shells, might be an early access issue. ETL and VRS values might need adjustments as well. I'm looking forward to your feedback.

And thx for all the support

Ok, for those of us who are new to the Sim Shaker. Is it necessary to uninstall the current version first or can this be installed over top of the old? Will the existing input settings for all aircraft modules be wiped out and need to be redone? If so, is there a way to save existing aircraft profiles?

Harlikwin · June 22, 2021

5 minutes ago, Topgun505 said:

Ok, for those of us who are new to the Sim Shaker. Is it necessary to uninstall the current version first or can this be installed over top of the old? Will the existing input settings for all aircraft modules be wiped out and need to be redone? If so, is there a way to save existing aircraft profiles?

Tbh I have no idea what I did. Repair is eventually what worked. I assume you can install over older versions having done that before.

VampireNZ · June 22, 2021

Same deal here - just installed the new Beta version and hit the Repair DCS output file or whatever it's called button and was all good.

Topgun505 · June 22, 2021

4 minutes ago, VampireNZ said:

Same deal here - just installed the new Beta version and hit the Repair DCS output file or whatever it's called button and was all good.

I think I currently have the Stable version installed, rather than the Beta, though. That make any difference? Or dump it in favor of Beta?

VampireNZ · June 22, 2021

2 minutes ago, Topgun505 said:

I think I currently have the Stable version installed, rather than the Beta, though. That make any difference? Or dump it in favor of Beta?

Personally I am running the Beta to get the feedback for the new Hind as it is tweaked and updated, otherwise Stable is fine.

Razorback · June 23, 2021

I deleted the stable version, installed the beta and now all is working fine!

Thx a lot guys...

Edited June 23, 2021 by Razorback

Topgun505 · June 24, 2021

18 hours ago, Razorback said:

I deleted the stable version, installed the beta and now all is working fine!

Thx a lot guys...

Did you have to redo all your feedback values for each aircraft?

Razorback · June 24, 2021

5 hours ago, Topgun505 said:

Did you have to redo all your feedback values for each aircraft?

yes I did but only for the Mi-24P. I don't currently fly with my other DCS modules.

MAXsenna · June 24, 2021

yes I did but only for the Mi-24P. I don't currently fly with my other DCS modules.

I wonder why???

Sent from my MAR-LX1A using Tapatalk

Razorback · June 24, 2021

3 hours ago, MAXsenna said:

I wonder why???

Sent from my MAR-LX1A using Tapatalk

emc · June 27, 2021

On 5/24/2021 at 5:01 PM, cptsolo said:

Unfortunately SimShaker for aviators stopped working suddenly. When I start SimShaker for aviators (beta or stable), it suddenly generates a .NET Framework error message about an access viaolation to a socket:

System.Net.Sockets.SocketException (0x80004005): Der Zugriff auf einen Socket war aufgrund der Zugriffsrechte des Sockets unzulässig
bei System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
bei System.Net.Sockets.Socket.Bind(EndPoint localEP)
bei System.Net.Sockets.UdpClient..ctor(Int32 port, AddressFamily family)
bei SimShaker.Core.DataProvider.XPlaneDataProvider..ctor(CallBackOnAircraftChange callBackOnAircraftChange, Action callbackPlayEffects, Action callbackStopEffects)
bei SimShaker.Core.MasterManager..ctor(MainForm link)
bei SimShaker.UI.MainForm..ctor()
bei SimShaker.UI.AutoStarterForm.startSimShakerForDCSWorldToolStripMenuItem_Click(Object sender, EventArgs e)
bei System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
bei System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
bei System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
bei System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
bei System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)
bei System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)
bei System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
bei System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
bei System.Windows.Forms.ToolStrip.WndProc(Message& m)
bei System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Geladene Assemblys **************
mscorlib
...

It used to work flawlessly and stopped suddenly. No reboot / reinstall of the software helped...

I got similar problem after windows pulled .NET update KB5003254

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Net.Sockets.SocketException (0x80004005): An attempt was made to access a socket in a way forbidden by its access permissions
   at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Bind(EndPoint localEP)
   at System.Net.Sockets.UdpClient..ctor(Int32 port, AddressFamily family)
   at SimShaker.Core.DataProvider.XPlaneDataProvider..ctor(CallBackOnAircraftChange callBackOnAircraftChange, Action callbackPlayEffects, Action callbackStopEffects)
   at SimShaker.Core.MasterManager..ctor(MainForm link)
   at SimShaker.UI.MainForm..ctor()
   at SimShaker.UI.AutoStarterForm.timer1_Tick(Object sender, EventArgs e)
   at System.Windows.Forms.Timer.OnTick(EventArgs e)
   at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4360.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
SimShaker for Aviators
    Assembly Version: 2.2.0.0
    Win32 Version: 2.2.0.0
    CodeBase: file:///S:/Program%20Files/SimShaker/SimShaker%20for%20Aviators/SimShaker%20for%20Aviators.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4360.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
NLog
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.6.12219
    CodeBase: file:///S:/Program%20Files/SimShaker/SimShaker%20for%20Aviators/NLog.DLL
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4360.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4270.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.ServiceModel
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4250.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
----------------------------------------
System.Runtime.Serialization
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4250.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
----------------------------------------
Accessibility
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

fagulha · June 27, 2021

On 6/17/2021 at 1:20 AM, moridar said:

I second that. I'm dying without SimShaker in the Hind. Is there any way to just fall back to the defaults if the detected aircraft is not recognized? I miss it in the T-45 and A-4 as well, and then we wouldn't have to wait for an update every time a new aircraft is released.

I'm sure it's more complicated than I think it is, but just a thought

+1. But i know that will take a lot of work.

Stays as a wish due the T-45C being such a great mod par with SSA.

Nevertheless thank you f410 for your work.

Rogue Trooper · June 28, 2021

Thanks f410.

Good to have the Hind Vibrating!

Does the SSA software not auto update?

I uninstalled V 1.13 or V 1.31 or something around those numbers.

Thanks again for your hard work.

Baldrick33 · June 28, 2021

3 hours ago, Rogue Trooper said:

Thanks f410.

Good to have the Hind Vibrating!

Does the SSA software not auto update?

I uninstalled V 1.13 or V 1.31 or something around those numbers.

Thanks again for your hard work.

In the Service tab you can check "Check for update on startup". Then you will be prompted every time there is a new update available.

f4l0 · June 28, 2021

4 hours ago, Rogue Trooper said:

Thanks f410.

Good to have the Hind Vibrating!

Does the SSA software not auto update?

I uninstalled V 1.13 or V 1.31 or something around those numbers.

Thanks again for your hard work.

You are on a really old version. I switched to a classic installer a year or more ago... Thus the old update does not work anymore Please download the beta from https://1drv.ms/f/s!AldPAmClTeGqcB3fFPneMUkxlDc

Edited June 28, 2021 by f4l0

Rogue Trooper · June 29, 2021

15 hours ago, f4l0 said:

You are on a really old version. I switched to a classic installer a year or more ago... Thus the old update does not work anymore Please download the beta from https://1drv.ms/f/s!AldPAmClTeGqcB3fFPneMUkxlDc

I am up to date now and installed the new SSA Beta a couple of days ago.

The old software seemed to work just fine for a year and a half on my new PC. It recently started to cause problems.... as every one else is seeing.

With every update, does the new install/update wipe the Vibration settings for each module or is there a way to save and reload the each modules settings?

I think I know the answer..... no.

f4l0 · June 30, 2021

20 hours ago, Rogue Trooper said:

I am up to date now and installed the new SSA Beta a couple of days ago.

The old software seemed to work just fine for a year and a half on my new PC. It recently started to cause problems.... as every one else is seeing.

With every update, does the new install/update wipe the Vibration settings for each module or is there a way to save and reload the each modules settings?

I think I know the answer..... no.

No, SSA should keep the settings, however. It's always a good idea to backup important stuff from time to time

VampireNZ · June 30, 2021

Just saw in Hind updates...

Ammo counter panel implemented

Brrrrttttttt

f4l0 · July 2, 2021

On 6/27/2021 at 8:57 PM, emc said:

I got similar problem after windows pulled .NET update KB5003254


See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Net.Sockets.SocketException (0x80004005): An attempt was made to access a socket in a way forbidden by its access permissions
   at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Bind(EndPoint localEP)
   at System.Net.Sockets.UdpClient..ctor(Int32 port, AddressFamily family)
   at SimShaker.Core.DataProvider.XPlaneDataProvider..ctor(CallBackOnAircraftChange callBackOnAircraftChange, Action callbackPlayEffects, Action callbackStopEffects)
   at SimShaker.Core.MasterManager..ctor(MainForm link)
   at SimShaker.UI.MainForm..ctor()
   at SimShaker.UI.AutoStarterForm.timer1_Tick(Object sender, EventArgs e)
   at System.Windows.Forms.Timer.OnTick(EventArgs e)
   at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4360.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
SimShaker for Aviators
    Assembly Version: 2.2.0.0
    Win32 Version: 2.2.0.0
    CodeBase: file:///S:/Program%20Files/SimShaker/SimShaker%20for%20Aviators/SimShaker%20for%20Aviators.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4360.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
NLog
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.6.12219
    CodeBase: file:///S:/Program%20Files/SimShaker/SimShaker%20for%20Aviators/NLog.DLL
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4360.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4270.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.ServiceModel
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4250.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
----------------------------------------
System.Runtime.Serialization
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4250.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
----------------------------------------
Accessibility
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Do you still have this issue? Looks like something is using the port SSA likes to use...

WinOrLose · July 4, 2021

Received the notification to update the software but the SSA wont launch at all using the latest version. I reinstalled the previous version which does "work" but not in all circumstances - I don't get any feeling for gears up, guns or rolling on the tarmac - g effect buffet, AB does appear to work. Any thoughts?

PeneCruz · July 6, 2021

Hi @f4l0 I've been playing with the turbulence editor a fair bit lately trying to tune my experience, it's very cool. The thresholds are nicely configurable and the effect configuration works but I've got some ideas that might help people tune their output to provide more of the thump you get with turbulence IRL.

I've found if I leave the jetpad off and only output to my transducer it provides a more realistic feeling as the buzz from the jetpad is not indicative of turbulence.

What would help would be an option in the configurator to tune the frequency of the effect as well as the threshold and magnitude, this would allow you to tune the overall feel to generate more of thump for your particular configuration.

PeneCruz · July 6, 2021

Also is there an explanation of how the auto scale feature works?

f4l0 · July 9, 2021

On 7/6/2021 at 9:30 AM, PeneCruz said:

Hi @f4l0 I've been playing with the turbulence editor a fair bit lately trying to tune my experience, it's very cool. The thresholds are nicely configurable and the effect configuration works but I've got some ideas that might help people tune their output to provide more of the thump you get with turbulence IRL.

I've found if I leave the jetpad off and only output to my transducer it provides a more realistic feeling as the buzz from the jetpad is not indicative of turbulence.

What would help would be an option in the configurator to tune the frequency of the effect as well as the threshold and magnitude, this would allow you to tune the overall feel to generate more of thump for your particular configuration.

Changing the frequency of a effect is a Sound Module thing. Since I'm not the developer of the module I can not help. However, you can edit the effect files to your liking...

On 7/6/2021 at 9:36 AM, PeneCruz said:

Also is there an explanation of how the auto scale feature works?

Auto Scale is just the scaling for the axis of the graph.

[Official] SimShaker for Aviators

Recommended Posts

Link to comment

Share on other sites

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

f4l0

f4l0

f4l0

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Recently Browsing 0 members