Introducing the VPC MongoosT-50

[Cyph3r]

Haha mine went out on the 5th still says its its in transit

 

Can you send me your order number please?

[FraserNZL]

Can you send me your order number please?

Pm sent on the forums. Or should I email?

[Cyph3r]

Pm sent on the forums. Or should I email?

 

sale@virpil.com please!

[sc_neo]

Since shipping prices are calculated only when you actually order things in the Virpil store, i'd like to ask here what shipping to Germany for the 10cm stick extension would be? From where would that be shipped to Germany in any case?

Edited August 26, 2017 by sc_neo

[Cyph3r]

Since shipping prices are calculated only when you actually order things in the Virpil store, i'd like to ask here what shipping to Germany for the 10cm stick extension would be? From where would that be shipped to Germany in any case?

 

You can go on virpil.by and the shipping cost is calculated on the fly on the basket page after you type in your address! :thumbup:

 

Currently everything is shipped from the VPC HQ in Belarus.

[sc_neo]

ok thx.

[kingpinda]

My t50 Base has finally been sent out yay! Can't wait to try it out.

[Pasquale1986]

Since the Amazon anouncement i was unable to hold myself back for two more weeks and just ordered the Mongoose with the base. I am really excited to get my hands on the stick!

[Merlin_VFA34]

Got mine today and it feels good but I can not see any difference between the 2 dot cams and the 4 dot cams. Which one is supposed to be the flat one? The one at the moment installed (could not see the dots) is curvy in the mittle an flat at the edge.

 

I have allready switched the black to the blue / white springs and it feels better now but the center still feels a bit to stiff.

[LeCuvier]

First exploration of the T-50

 

I got my T-50 last week but could not use it since I had no way to mount it on my MonsterTech table mount. Finally I managed to make a mounting bracket myself and started to explore the axes and buttons. I found that the doc from VPC is not overly helpful. So, using just a picture from the VPC doc, I made a PDF document showing the grip with reference numbers, plus a table providing the button ID's plus names that I invented. I need these informations in order to document my input bindings for each aircraft. I attach the document.

Some inconsistencies in the VPC doc (numbers are references from the original VPC doc):

9: The lower 4-way switch is described as "Momentary 2-way switch, Optional 4-way hat. It is simply a momentary 4-way switch.

10: The POV switch is described as a 4-way hat although it has 8 switches.

12: Described as "lever axis and button", but only provides a switch. I could not see any axis signal from it when I tried to bind it to an axis.

 

Questions to Cyph3r:

1. I was relying on getting an axis from this lever. How to activate that function?

2. Please provide definition of the springs and cams in the little plastic bags!

3. I could not find any switch for JOY_BTN6. Isn't there any?

MongoosT-50_Buttons.pdf

Edited August 31, 2017 by LeCuvier

[Cyph3r]

I got my T-50 last week but could not use it since I had no way to mount it on my MonsterTech table mount. Finally I managed to make a mounting bracket myself and started to explore the axes and buttons. I found that the doc from VPC is not overly helpful. So, using just a picture from the VPC doc, I made a PDF document showing the grip with reference numbers, plus a table providing the button ID's plus names that I invented. I need these informations in order to document my input bindings for each aircraft. I attach the document.

Some inconsistencies in the VPC doc (numbers are references from the original VPC doc):

8: The Index Switch, described as "momentary 2-way switch" is not a 2-way switch. It is a single momentary ON/OFF.

9: The lower 4-way switch is described as "Momentary 2-way switch, Optional 4-way hat. It is simply a momentary 4-way switch.

10: The POV switch is described as a 4-way hat although it has 8 switches.

12: Described as "lever axis and button", but only provides a switch. I could not see any axis signal from it when I tried to bind it to an axis.

 

Questions to Cyph3r:

1. I was relying on getting an axis from this lever. How to activate that function?

2. Please provide definition of the springs and cams in the little plastic bags!

3. I could not find any switch for JOY_BTN6. Isn't there any?

 

Hi LeCuvier!

 

I'm glad to hear you've got your hands on the on the MT-50 now!

 

The inconsistencies mentioned have since been updated as this was based on older plans for the MT-50 grip. Also I'm pretty sure all "POV" hats are 8-way, diagonals are achieved by a combo of 2 directions!

 

Regarding the button IDs, I posted a template for the button ID mappings a while ago. Button 6 is on the index finger switch on the side.

 

 

Regarding the brake lever axis, can you email support@virpil.com and we'll get this sorted out for you.

 

Cams:

• 1 Dot = Hard Center
  
• 2 Dot = Soft Center
  
• 4 Dot = No Center
  

 

Springs:

• White = Light
  
• Blue = Medium
  
• Red = Heavy
  

 

I hope this helps! Let me know if there's anything else I can help with

Edited August 31, 2017 by Cyph3r

[LeCuvier]

yes I see, in fact the index switch has a forward action; but the movement is tiny and you have to put your hand in a somewhat unnatural position to activate it. That's why I hadn't found it.

Regarding documentation, we shouldn't have to search for it in this thread. It should be available on a download page on VIRPIL's web site!

 

Thanks for your help!

[Cyph3r]

yes I see, in fact the index switch has a forward action; but the movement is tiny and you have to put your hand in a somewhat unnatural position to activate it. That's why I hadn't found it.

Regarding documentation, we shouldn't have to search for it in this thread. It should be available on a download page on VIRPIL's web site!

 

Thanks for your help!

 

Don't worry, we'll be getting it all added to the support page soon! :)

 

No problem, if there's anything else just let me know!

[Pasquale1986]

Hey Cyph3r, which extension would you suggest to emulte stick-Mmovement in the SU-27 and the Mig-29?

 

Thanks in advance!

[Cyph3r]

Hey Cyph3r, which extension would you suggest to emulte stick-Mmovement in the SU-27 and the Mig-29?

 

Thanks in advance!

 

150mm-175mm would give you the most accurate replication of the flightstick stroke length found in the Su-27/MiG-29 :thumbup:

[Rogue Trooper]

Any chopper pilots out there got the base unit with soft centre cams?

Need to hear some feedback on spring tension around the centre position as well as ease of movement and wetness of movement, especially in comparison to the hawg base unit.

I read that there are some "rough" cams out there and this is ok initially but at the end of development we want highly polished, slicker than snot metal on metal contacts.

 

 

Reviews please chaps, do not worry about bad reviews, its good for you to talk and just let the pressure off, its good for me and it is definitely good for the manufacturer and their end product success.

[Cyph3r]

Any chopper pilots out there got the base unit with soft centre cams?

Need to hear some feedback on spring tension around the centre position as well as ease of movement and wetness of movement, especially in comparison to the hawg base unit.

I read that there are some "rough" cams out there and this is ok initially but at the end of development we want highly polished, slicker than snot metal on metal contacts.

 

 

Reviews please chaps, do not worry about bad reviews, its good for you to talk and just let the pressure off, its good for me and it is definitely good for the manufacturer and their end product success.

 

The "rough" cams were a faulty batch from the factory, we're replacing these with newly revised polished cams :thumbup:

 

I'll leave other users to respond to your other points though as I'm sure my opinion on the matter would be biased! :pilotfly:

[Pasquale1986]

150mm-175mm would give you the most accurate replication of the flightstick stroke length found in the Su-27/MiG-29 :thumbup:

 

Thanks man, I'll go with the set then! Appreciate the help!

[dburne]

Any chopper pilots out there got the base unit with soft centre cams?

Need to hear some feedback on spring tension around the centre position as well as ease of movement and wetness of movement, especially in comparison to the hawg base unit.

I read that there are some "rough" cams out there and this is ok initially but at the end of development we want highly polished, slicker than snot metal on metal contacts.

 

 

Reviews please chaps, do not worry about bad reviews, its good for you to talk and just let the pressure off, its good for me and it is definitely good for the manufacturer and their end product success.

 

I do but unfortunately was in the early batch of bad cams, I am anxiously awaiting my replacement cams to give the soft center cams along with soft springs a try...

[Cyph3r]

Just so everyone knows, the replacement cams are going out tomorrow!

Edited August 31, 2017 by Cyph3r
Corrected date

[dburne]

Just so everyone knows, the replacement cams are going out tomorrow!

 

:thumbup:

 

That is great to hear, thanks!

I am really looking forward to changing mine out.

[Rogue Trooper]

The "rough" cams were a faulty batch from the factory, we're replacing these with newly revised polished cams :thumbup:

 

I'll leave other users to respond to your other points though as I'm sure my opinion on the matter would be biased! :pilotfly:

Thanks Cyph3r,

looking forward to reading the reviews.

[Rogue Trooper]

I do but unfortunately was in the early batch of bad cams, I am anxiously awaiting my replacement cams to give the soft center cams along with soft springs a try...

 

 

 

 

 

Looking forward to your feedback.

[Barefoot Bandit]

Just so everyone knows, the replacement cams are going out tomorrow!

 

Awesome - have not had a chance to sand mine down yet, but will probably do it over the weekend, along with working out how to mount it to my chair. :joystick:

 

Z...

[WindyTX]

I have the soft cam in and it works well for Helo flying with the medium springs. There is no real notch in the center. Afraid I havent tried the no center cam but have done a lot of sling loading and not had a problem.

 

Sent from my SM-G955U using Tapatalk