Madbrood Posted October 22, 2019 Posted October 22, 2019 FWIW, my detent now works perfectly with the stock axis settings for the Viper. i7-4770k | EVGA GTX 980 SC | 16GB DDR3 | TrackIR 5, TM Warthog HOTAS, Saitek Pro Flight Rudder Pedals DCS: F-16C, F/A-18C, F-14A/B, AV-8B, FC3, A-10C, Black Shark II, UH-1H, F-86F, MiG-21bis, Mirage 2000C, AJS-37, F-5E :pilotfly:
BlacleyCole Posted November 27, 2019 Posted November 27, 2019 what no huey BlackeyCole 20years usaf XP-11. Dcs 2.5OB Acer predator laptop/ i7 7720, 2.4ghz, 32 gb ddr4 ram, 500gb ssd,1tb hdd,nvidia 1080 8gb vram New FlightSim Blog at https://blackeysblog.wordpress.com. Go visit it and leave me feedback and or comments so I can make it better. A new post every Friday.
statrekmike Posted December 7, 2019 Posted December 7, 2019 Any curves for the MiG-19? Since the MiG-19 requires manual activation of both mil power and afterburner (via entirely separate controls), it doesn't need any curve settings as they would serve no real function.
sobe Posted December 7, 2019 Posted December 7, 2019 (edited) Greyman In your post #100, did you leave out a number near the end? In the F16, the RPM listing in the info bar, the RPM gauge in the jet and the fuel flow meter gauge in the jet do not seem to be synchronized. I am trying to get the throttle set up to be just before the afterburner kicks in, but the above 3 items do not seem to synchronize very quickly or accurately. Edited December 8, 2019 by sobe Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .
Kirin Posted January 3, 2020 Posted January 3, 2020 F-14 settings are perfect for me. Had to raise 8 -> 10 in the Mig21 and smoothen out the curve afterwards. Great thread!
veenee Posted January 6, 2020 Posted January 6, 2020 what no huey actually, a curve for Huey/Mi-8 would be nice - the one having 0 collective where detent is, so you don't have to go over it each time you reduce it for landing for example So many modules, so little time... www.mikphotography.com
lxsapper Posted January 6, 2020 Posted January 6, 2020 actually, a curve for Huey/Mi-8 would be nice - the one having 0 collective where detent is, so you don't have to go over it each time you reduce it for landing for example You don't need a curve for that just make sure your axis is a slider, and add eighter a deadzone, or a y or x axis saturation (can't remember which will be the right one for that). ALternatively you can just remove the detent when flying those... :)
veenee Posted January 6, 2020 Posted January 6, 2020 ok will play with this, thanks, if it saves me removing the detent So many modules, so little time... www.mikphotography.com
lxsapper Posted January 6, 2020 Posted January 6, 2020 ok will play with this, thanks, if it saves me removing the detent Go into axis tunning move your axis put it right to the stop. Then find which of the controlls I mentioned is the right one and move it until max (well min actually) value is reached right at the stop.
MTFDarkEagle Posted January 7, 2020 Author Posted January 7, 2020 Swapping out the detent takes 20 seconds... Why would you sacrifice a significant portion of your throttle throw to save this time? Lukas - "TIN TIN" - 9th Shrek Air Strike Squadron TIN TIN's Cockpit thread
veenee Posted January 7, 2020 Posted January 7, 2020 because I don't want to lose 20 seconds and swap it like once a day? So many modules, so little time... www.mikphotography.com
MTFDarkEagle Posted January 7, 2020 Author Posted January 7, 2020 Fair enough - to each their own off course :) Just doesn't compute in my upstairs area :P (I swap it multiple times per session of flying...) Lukas - "TIN TIN" - 9th Shrek Air Strike Squadron TIN TIN's Cockpit thread
veenee Posted January 7, 2020 Posted January 7, 2020 I honestly can't be bothered to fiddle with it, and I think I will just leave it with a detent. If I use a deadzone, I would have to switch 'Inverted' option off. So all stays the same :-) So many modules, so little time... www.mikphotography.com
lxsapper Posted January 8, 2020 Posted January 8, 2020 I honestly can't be bothered to fiddle with it, and I think I will just leave it with a detent. If I use a deadzone, I would have to switch 'Inverted' option off. So all stays the same :-) @veenee Like I said I was unsure which setting it actually was because I was away and unable to launch DCS. But I said it could be one of the other settings, as It happens, It's Saturation X, I just checked.
veenee Posted January 8, 2020 Posted January 8, 2020 Hmm I tried them and did not get what I aimed for, but it must have been me :-) Thanks for checking! So many modules, so little time... www.mikphotography.com
Pooter03 Posted February 8, 2020 Posted February 8, 2020 Swapping out the detent takes 20 seconds... Why would you sacrifice a significant portion of your throttle throw to save this time? For me, my throttle squeaks badly if I turn the detent around. I need to keep it on to avoid the striction/squeaking.
MTFDarkEagle Posted February 12, 2020 Author Posted February 12, 2020 PTFE spray? :) Lukas - "TIN TIN" - 9th Shrek Air Strike Squadron TIN TIN's Cockpit thread
killkenny1 Posted March 15, 2020 Posted March 15, 2020 (edited) Anyone got A/B detent curve for the Jeff? EDIT: Some nice presets for Jeff: https://forums.eagle.ru/showthread.php?t=266494 Edited March 17, 2020 by killkenny1 НЕТ ВОЙНЕ! Gib full-fi Su-27 or MiG-29 plz! AMD R7 3700X|32GB DDR4 RAM|Gigabyte RTX2070S Gaming OC|2TB NVMe SDD + 1TB SSD + 2TBB + 1TB HDD|Dell P3421W|Windows 10 Pro x64 TM Warthog|MFG Crosswind|Samsung Odyssey+|TrackIR 5 Modules: Mirage F1|Mi-24P|JF-17|F/A-18C|F-14A/B|F-5E|M-2000C|MiG-21bis|L-39|Yak-52|FC3|Supercarrier || Terrains: Persian Gulf|NTTR|Normandy|Syria
Wikkus Posted May 12, 2020 Posted May 12, 2020 Bump and this should be sticky somewhere + several million votes ;) Anybody got similar for the TM Cougar TQS or point me to an appropriate thread? Only the WH numbers don't correlate particularly closely :( Cheers, Rik
speed-of-heat Posted May 12, 2020 Posted May 12, 2020 This should help... SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
Wikkus Posted May 13, 2020 Posted May 13, 2020 Ta, muchly! This should help... Actually, yes it does and no idea why I've not seen it before now as I've been subscribed to Red Kite's channel for ages. Have been trying to get my TQS curve right for months, but that helped me understand where I've been a bit off. Cheers! :thumbup: Rik.
speed-of-heat Posted May 13, 2020 Posted May 13, 2020 Me too m8, me too! SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
Shane45 Posted August 22, 2020 Posted August 22, 2020 Hi Buddy, I have my WH throttles set exactly the same as your pic, however I can only get to stage 3.5 at full burn, There are 5 stages of burn in the F14, but I can't seem to get past the 3.5
speed-of-heat Posted August 22, 2020 Posted August 22, 2020 can you show an image of your curve on the throttle ? SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
Recommended Posts