Pierrot Posted May 15, 2017 Share Posted May 15, 2017 Merci beaucoup ! A l'EVAC (France), nous attendons avec impatience la version finalisée... EVAC = Ecole Virtuelle d'Aviation de Chasse At the EVAC (france), we look forward to the finalized version ... EVAC = Virtual Hunting Aviation School 1 Link to comment Share on other sites More sharing options...
Pierrot Posted May 15, 2017 Share Posted May 15, 2017 Petite mission de récupération Encore Merci ! Link to comment Share on other sites More sharing options...
AV_Partizan Posted May 17, 2017 Share Posted May 17, 2017 Hi, big up for this fantastic mod, any chance to get a PSD file for skinning ? Link to comment Share on other sites More sharing options...
mr_mojo97 Posted May 21, 2017 Share Posted May 21, 2017 This is a totally fantastic mod! By the way where are the other skins - agri, MASH etc? Thanks MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
Enanorojo Posted August 24, 2017 Share Posted August 24, 2017 Since the last update of DCS, this mod does not let the simulator start. Is it possible to solve it ?. I love this helicopter. Thanks. Link to comment Share on other sites More sharing options...
Holton181 Posted August 24, 2017 Share Posted August 24, 2017 Delete the bin folder from its main foldet and copy the (new) bin from UH1 again. Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Enanorojo Posted August 24, 2017 Share Posted August 24, 2017 Ok, thank you very much!! Link to comment Share on other sites More sharing options...
bestwishes Posted November 10, 2017 Share Posted November 10, 2017 Installation of bell47 for Nevada / Normandy... Hi, sorry, anyone who has used bell47, any hints: I could install it and could fly with it in the Caucasus map (it's great), did the same installation (also copied the Huey's bin file) in case of Nevada / Normandy, but it does not work....bell47 can not be placed in a mission in mission editor....nor it's small icon can be seen on the bottom of the default screen.... Many thanks Link to comment Share on other sites More sharing options...
keem85 Posted January 25, 2018 Share Posted January 25, 2018 How do you guys install this mod? Any decent guide on how to do it? Link to comment Share on other sites More sharing options...
Cibit Posted January 25, 2018 Share Posted January 25, 2018 Seems borked for 2.2 i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 25, 2018 Share Posted January 25, 2018 (edited) Au Contraire! See here, https://forums.eagle.ru/showthread.php?t=186497&page=9 I also suggest reading through this entire thread. You may find a few goodies..............:music_whistling: Edited January 25, 2018 by Hawkeye60 "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
funkyfranky Posted January 25, 2018 Share Posted January 25, 2018 Au Contraire! Oh, is it working in 2.2? I briefly tried recently and somehow did not manage to get into the cockpit. In which directory did you install it - Saved Games or main DCS installation folder? A warrior's mission is to foster the success of others. i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2 RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 25, 2018 Share Posted January 25, 2018 Saved Games. "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Holton181 Posted January 25, 2018 Share Posted January 25, 2018 Au Contraire! See here, https://forums.eagle.ru/showthread.php?t=186497&page=9 I also suggest reading through this entire thread. You may find a few goodies..............:music_whistling: Hawkeye60, I have had the 47 running on 2.1 (I believe in 2.2 as well) but also got problems. Hav followed your's and other's advises in that thread and this but still can't enter the cockpit anymore. May I ask what version of the 47 do you use, and where to download it? I have several versions downloaded and the one I'm using in 1.5 (and try to use in 2.2) is the one from the famous #47 post. Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 25, 2018 Share Posted January 25, 2018 (edited) Ok, I will provide a link to the version I am currently using in 2.2. On one condition............. How do you turn the crew statue window off!!!!!! :lol: I tried the usual key command to no avail. I suspect the default.lua keyboard file has been modified......... Hold a bit......... I have left the extra liveries in place. Be sure to thank crazyeddie. Even better, send him some rep! To make this work, You must copy the UH-1H Bin folder from whatever DCS version you are using into the main Bell folder. Install to the appropriate saved game folder. GvGME ready I took this directly from 2.2 where the above screens have just been taken. I did not test it. Let me know if she works. Hope this helps........ Dam, I just LOVE this bird! :D https://www.dropbox.com/s/pqfsd5kd2mbibak/Bell47_2%20V-2.rar?dl=0 Edited January 25, 2018 by Hawkeye60 3 "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Holton181 Posted January 25, 2018 Share Posted January 25, 2018 Ok, I will provide a link to the version I am currently using in 2.2. On one condition............. How do you turn the crew statue window off!!!!!! :lol: I tried the usual key command to no avail. I suspect the default.lua keyboard file has been modified......... Hold a bit......... I have left the extra liveries in place. Be sure to thank crazyeddie. Even better, send him some rep! To make this work, You must copy the UH-1H Bin folder from whatever DCS version you are using into the main Bell folder. Install to the appropriate saved game folder. GvGME ready I took this directly from 2.2 where the above screens have just been taken. I did not test it. Let me know if she works. Hope this helps........ Dam, I just LOVE this bird! :D https://www.dropbox.com/s/pqfsd5kd2mbibak/Bell47_2%20V-2.rar?dl=0 Thanks, but I've don all that to no vail :( Except downloading your version, will try it out immediately. I have used this version. Downloaded a new one a few minutes ago and in that I can enter the cockpit, but there are no cockpit! Rotors are spinning over my head and I have skids, but no cockpit, and it dies on me shortly after liftoff. Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Holton181 Posted January 25, 2018 Share Posted January 25, 2018 Ok, I will provide a link to the version I am currently using in 2.2. On one condition............. How do you turn the crew statue window off!!!!!! I tried the usual key command to no avail. I suspect the default.lua keyboard file has been modified......... Hold a bit......... I have left the extra liveries in place. Be sure to thank crazyeddie. Even better, send him some rep! To make this work, You must copy the UH-1H Bin folder from whatever DCS version you are using into the main Bell folder. Install to the appropriate saved game folder. GvGME ready I took this directly from 2.2 where the above screens have just been taken. I did not test it. Let me know if she works. Hope this helps........ Dam, I just LOVE this bird! :D https://www.dropbox.com/s/pqfsd5kd2mbibak/Bell47_2%20V-2.rar?dl=0Thanks, the version you provided did the trick! Where did you get it from? Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
funkyfranky Posted January 25, 2018 Share Posted January 25, 2018 Thanks, the version you provided did the trick! Where did you get it from? Good to hear. I did not even know there were different versions.... A warrior's mission is to foster the success of others. i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2 RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 25, 2018 Share Posted January 25, 2018 Same as you...........????????? "I now require the information KIRK" :D V"ger from Start Trek The motion picture The crew are spoiling my view! 1 "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Holton181 Posted January 25, 2018 Share Posted January 25, 2018 When did you download it? My last version was downloaded November 20 2017, didn't work at all. Then downloaded a new one today, sort-of worked. Now your's seems to work entirely (can't continue testing for now, my 2.5 year old request me to read her some books...) A side note: To get the throttle to work, copy device_init.lua and devices.lua from UH-1H\Cockpit\Scripts and place in corresponding location for the 47. Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5 Link to comment Share on other sites More sharing options...
Cibit Posted January 25, 2018 Share Posted January 25, 2018 Works for me too. Thanks :thumbup: i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB Link to comment Share on other sites More sharing options...
Alacc17 Posted January 25, 2018 Share Posted January 25, 2018 Ok, I will provide a link to the version I am currently using in 2.2. On one condition............. How do you turn the crew statue window off!!!!!! :lol: I tried the usual key command to no avail. I suspect the default.lua keyboard file has been modified......... Hold a bit......... I have left the extra liveries in place. Be sure to thank crazyeddie. Even better, send him some rep! To make this work, You must copy the UH-1H Bin folder from whatever DCS version you are using into the main Bell folder. Install to the appropriate saved game folder. GvGME ready I took this directly from 2.2 where the above screens have just been taken. I did not test it. Let me know if she works. Hope this helps........ Dam, I just LOVE this bird! :D https://www.dropbox.com/s/pqfsd5kd2mbibak/Bell47_2%20V-2.rar?dl=0 Thanks so much! Now it works for me again. But one problem remains. Trimmer does not work. фил фоба не слаще... ________________ i5-3570K, 24GB DDR3-1600, 6GB GTX1060, Win7x64 Link to comment Share on other sites More sharing options...
Emmy Posted January 26, 2018 Share Posted January 26, 2018 You're "Training Video" deserves to win an award all by itself! OutSTANDING! [sIGPIC][/sIGPIC] http://www.476vfightergroup.com/content.php High Quality Aviation Photography For Personal Enjoyment And Editorial Use. www.crosswindimages.com Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 26, 2018 Share Posted January 26, 2018 I am glad she works for you guys. The more I think about it, I MAY have done a few edits to get this to work. What they were escapes me presently! It has been a while. I will up-date the first post with the link, and do the same in the mods forum. I will add the updated install instructions and any code you guys give me permission to add. All should be able to enjoy her! Give me a day or so to put it together into a package. I may also play with the code a bit and see if.................Weapons? :music_whistling: I think I put the cockpit into a Kiowa! Stretchers too! Now where did I park that Chopper.............. So..... I assume permission is granted to add the needed code? :D "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Hawkeye60 Posted January 26, 2018 Share Posted January 26, 2018 Thanks so much! Now it works for me again. But one problem remains. Trimmer does not work. Did you copy the files mentioned earlier? I am wondering as I have not tested the trim function. It may be another thing to look at fixing before re-posting the link. "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
Recommended Posts