=Pedro= Posted December 9, 2017 Share Posted December 9, 2017 and the HUD :D What about the HUD ? Gigabyte Z390 Gaming X | i7 9700K@5.0GHz | Asus TUF OC RTX 4090 | 32GB DDR4@3200MHz | HP Reverb G2 | TrackIR 5 | TM Warthog HOTAS | MFG Croswinds Link to comment Share on other sites More sharing options...
GoR-07Vlad Posted December 9, 2017 Share Posted December 9, 2017 All of course is not very bad! But what about the marginal modes (https://forums.eagle.ru/showpost.php?p=3305569&postcount=222)? And thrust of the engine on low thrust Link to comment Share on other sites More sharing options...
unknown Posted December 9, 2017 Share Posted December 9, 2017 What about the HUD ? I can read the HUD now in 2.2 against bright background and the sun. Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings Link to comment Share on other sites More sharing options...
=Pedro= Posted December 9, 2017 Share Posted December 9, 2017 I can read the HUD now in 2.2 against bright background and the sun. Finally :thumbup: Gigabyte Z390 Gaming X | i7 9700K@5.0GHz | Asus TUF OC RTX 4090 | 32GB DDR4@3200MHz | HP Reverb G2 | TrackIR 5 | TM Warthog HOTAS | MFG Croswinds Link to comment Share on other sites More sharing options...
sunski34 Posted December 10, 2017 Share Posted December 10, 2017 Very good update. I tested it yesterday on 2.2, that's very good. Just a question... I understood that we have to press reset button (below the FBW limiter switch) to reset trim. But that is the appropriate joystick control ? Thanks Sunski Link to comment Share on other sites More sharing options...
SpeedStick Posted December 10, 2017 Share Posted December 10, 2017 (edited) So again, to clarify, is fm/engine fixed so its not a ufo-glider and closer to irl stats/behavior? Edit: or just the new fm with all its flaws? Edit2: Nvm, https://forums.eagle.ru/showpost.php?p=3319865&postcount=293 Edited December 10, 2017 by SpeedStick More questions. "Hard to imagine bigger engine. its got a beautiful face and an arse built like sputnik." - Pikey AKA The Poet, on 37 Viggen. Link to comment Share on other sites More sharing options...
docWilly Posted December 10, 2017 Share Posted December 10, 2017 Very good update. I tested it yesterday on 2.2, that's very good. Just a question... I understood that we have to press reset button (below the FBW limiter switch) to reset trim. But that is the appropriate joystick control ? Thanks Sunski If you updated to 2.2 all the new stuff should be in. Presently testing on TTS server 2.2 and confirmed [sIGPIC][/sIGPIC]my rig specs: i7-4790K CPU 4.50GHz, 32GB RAM, 64bit WIN10, NVidia GeForce GTX 980 Ti, SSD+ A10C, UH-1H, M2C, F5E, Gazelle, KA 50, F18C, DCS 2.5x OB Link to comment Share on other sites More sharing options...
trindade Posted December 10, 2017 Share Posted December 10, 2017 Great to know that we have more improvements. Thank you Razbam.:thumbup: Link to comment Share on other sites More sharing options...
docWilly Posted December 10, 2017 Share Posted December 10, 2017 So again, to clarify, is fm/engine fixed so its not a ufo-glider and closer to irl stats/behavior? Edit: or just the new fm with all its flaws? Edit2: Nvm, https://forums.eagle.ru/showpost.php?p=3319865&postcount=293 Just flew it for the first time after 2.2 update and to me it feels different to 1.5.8 (ufo-glider). I did no real "tests" with charts/numbers by the book but my guts say it´s "ok". Not sure what you mean with "all it´s flaws"? :cry: [sIGPIC][/sIGPIC]my rig specs: i7-4790K CPU 4.50GHz, 32GB RAM, 64bit WIN10, NVidia GeForce GTX 980 Ti, SSD+ A10C, UH-1H, M2C, F5E, Gazelle, KA 50, F18C, DCS 2.5x OB Link to comment Share on other sites More sharing options...
SpeedStick Posted December 10, 2017 Share Posted December 10, 2017 Just flew it for the first time after 2.2 update and to me it feels different to 1.5.8 (ufo-glider). I did no real "tests" with charts/numbers by the book but my guts say it´s "ok". Not sure what you mean with "all it´s flaws"? :cry: No you are right, something is different. In a good way. Now it does drops and stalls if you go below speed. You can do the high G turns and bleed speed like you expect in Deltas. Haven't done any test but at least it feels better. "Hard to imagine bigger engine. its got a beautiful face and an arse built like sputnik." - Pikey AKA The Poet, on 37 Viggen. Link to comment Share on other sites More sharing options...
sunski34 Posted December 11, 2017 Share Posted December 11, 2017 If you updated to 2.2 all the new stuff should be in. Presently testing on TTS server 2.2 and confirmed yes I know that. It's ok. My question is : Is there a bind for reset trim button just below the FBW limiter switch? Thanks in advance. Sunsi Link to comment Share on other sites More sharing options...
jojo Posted December 11, 2017 Share Posted December 11, 2017 Yes, CDV REARM or something like that. But in flight you would rather engage AP to trim to new conditions. It does trim pitch + roll. Yaw trim is constantly performed by FBW. Mirage fanatic ! I7-7700K/ MSI RTX3080/ RAM 64 Go/ SSD / TM Hornet stick-Virpil WarBRD + Virpil CM3 Throttle + MFG Crosswind + Reverb G2. Flickr gallery: https://www.flickr.com/gp/71068385@N02/728Hbi Link to comment Share on other sites More sharing options...
sunski34 Posted December 12, 2017 Share Posted December 12, 2017 Ok thanks, I will check. Sunski Link to comment Share on other sites More sharing options...
KEAPS Posted December 15, 2017 Author Share Posted December 15, 2017 Hi Folks, I must admit that the only remaining point is now slowing down and breaking the plane. I did a major error by transfering the config to the new version and it's a really a good idea to reset the axis control to default ! Now it behaves smoothly :) Great ! Now we just need a little bit more of efficiency in breaking, especially in flight. Finally a great improvement, thanks to Rzabam ! Link to comment Share on other sites More sharing options...
Esac_mirmidon Posted December 15, 2017 Share Posted December 15, 2017 Use overhead patterns A LOT. Is fun and very good for slowing down " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4 Link to comment Share on other sites More sharing options...
myHelljumper Posted December 15, 2017 Share Posted December 15, 2017 Now we just need a little bit more of efficiency in breaking, especially in flight. What version are you using ? I find the drag high enough on 2.2. Maybe you are talking about airbrakes ? Helljumper - M2000C Guru Helljumper's Youtube https://www.youtube.com/channel/UCK3rTjezLUxPbWHvJJ3W2fA Link to comment Share on other sites More sharing options...
Ala12Rv-watermanpc Posted December 15, 2017 Share Posted December 15, 2017 What version are you using ? I find the drag high enough on 2.2. Maybe you are talking about airbrakes ? This, I think 2.2 FM is pretty much perfect (or as perfect as it has been EVER)...drag feels correct to me in all moment as well as everything else though I'm not a mirage 2000 pilot :P Take a look at my MODS here Link to comment Share on other sites More sharing options...
plaiskool Posted December 15, 2017 Share Posted December 15, 2017 Hi, not that bad but the kind of pitch buck mini stall when flying slow and pulling above the elastic stop feel a bit weird IMO. Link to comment Share on other sites More sharing options...
vctpil Posted December 16, 2017 Share Posted December 16, 2017 Hi, I quite disappointed by the flight model change. From 200 knots, there is no damping anymore and the aircraft seems to fly a simple flight model (or like a train)! I am not a fighter pilot, but I am flying civilian aircraft, 777 and 737. Having flying the 777 with electronic flight control, there is always a quite few damping effect (I mean, when releasing the flight control, the aircraft take few time to stop the induced mouvement), because an aircraft just fly in the air. This is exactly the opposite in the latest M2000 flight model change. I understand that a public flight simulator cannot reproduce exactly a real flight model, but I have corrected a lot of flight model in FS9 and X, P3D and X-Plane. Adding some damping effect in flight controls give a real sensation of flying. So, please, correct that for the next time. Thanks, Vincent IAMD Ryzen 9 5900X 12x 3.7 to 4.8Ghz - 32Go DDR4 3600Mhz - GeForce RTX 3080 - Samsung Odyssey G7 QLED - AIMXY Link to comment Share on other sites More sharing options...
plaiskool Posted December 16, 2017 Share Posted December 16, 2017 VCTPIL what kind of damping you are talking about? I think it's good to give opinion but telling them to change stuff because it's not what you have in your 777 or 737 it's a bit simple. Link to comment Share on other sites More sharing options...
mr_mojo97 Posted December 16, 2017 Share Posted December 16, 2017 HELP. I can’t land the Mirage anymore after the recent change!!! It seems I have to land at like 220 knots to keep the hud AoA markets correct otherwise it just seems to bomb. Is there a new procedure to land correctly please. Cheers MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
vctpil Posted December 16, 2017 Share Posted December 16, 2017 I don't want the M2000 FM to look like the 777, that's not the point. If you have the F-5, when you release the control in roll for example, the aircraft take 0.5 seconds, even less to stabilize. That should be the same with any aircraft, proportinally to its design and flight control system. The M2000 just stop suddenly to roll when you release the controls. This is not how an aircraft is flying, simply. Just look at some cockpit footage of some M2000 in demo, and you will see. Cheers, IAMD Ryzen 9 5900X 12x 3.7 to 4.8Ghz - 32Go DDR4 3600Mhz - GeForce RTX 3080 - Samsung Odyssey G7 QLED - AIMXY Link to comment Share on other sites More sharing options...
FSKRipper Posted December 16, 2017 Share Posted December 16, 2017 I don't want the M2000 FM to look like the 777, that's not the point. If you have the F-5, when you release the control in roll for example, the aircraft take 0.5 seconds, even less to stabilize. That should be the same with any aircraft, proportinally to its design and flight control system. The M2000 just stop suddenly to roll when you release the controls. This is not how an aircraft is flying, simply. Just look at some cockpit footage of some M2000 in demo, and you will see. Cheers, Could you supply some links please? I had problems finding videos of the 2000-C where stick position and roll ratio are clearly visible the same time. i9 9900K @ 5,0GHz | 1080GTX | 32GB RAM | 256GB, 512GB & 1TB Samsung SSDs | TIR5 w/ Track Clip | Virpil T-50 Stick with extension + Warthog Throttle | MFG Crosswind pedals | Gametrix 908 Jetseat [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
vctpil Posted December 16, 2017 Share Posted December 16, 2017 There is no need to compare the stick position and the aircraft movement, this is just aerodynamically how an aircraft is moving in the air. Look at this one, at the very beginning when the aircraft is rlling on the right (I thing the pilot is not using the full deflection of its stick) : https://www.youtube.com/results?search_query=mirage+2000+HUD Clearly, the aircraft does not stop rolling suddently. On this one, from 3:52, it is quite evident too : IAMD Ryzen 9 5900X 12x 3.7 to 4.8Ghz - 32Go DDR4 3600Mhz - GeForce RTX 3080 - Samsung Odyssey G7 QLED - AIMXY Link to comment Share on other sites More sharing options...
FSKRipper Posted December 16, 2017 Share Posted December 16, 2017 (edited) There is no need to compare the stick position and the aircraft movement, this is just aerodynamically how an aircraft is moving in the air. Look at this one, at the very beginning when the aircraft is rlling on the right (I thing the pilot is not using the full deflection of its stick) : https://www.youtube.com/results?search_query=mirage+2000+HUD Clearly, the aircraft does not stop rolling suddently. On this one, from 3:52, it is quite evident too : Hmm, the first is a list with mainly HUD displays, the second video can't be viewed from 3:52 because it's only 3:52 long... And yes, there is a need to compare the stick position otherwise you don't know if the pilot maybe gives short inputs for correction or countersteers which can be quiet common in demo flights Edited December 16, 2017 by FSKRipper i9 9900K @ 5,0GHz | 1080GTX | 32GB RAM | 256GB, 512GB & 1TB Samsung SSDs | TIR5 w/ Track Clip | Virpil T-50 Stick with extension + Warthog Throttle | MFG Crosswind pedals | Gametrix 908 Jetseat [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Recommended Posts