VR Shaders mod for better VR experience

[speed-of-heat]

oh OK 40 is an odd refresh rate to be locked at for G2 its normally 45 or 90 or some arbitrary number. dont worry about ASW, create a separate thread under VR and post your settings there, i have a 3090 but you can likely use my settings as a start 

[Bog9y]

I just installed the shaders mod on a clean DCS install and my performance is actually worse now. Really weird, it would normally improve the performance but for some reason it makes it worse. My frame time went up from 22-ish ms to 30-40 ms (45 hz, reprojection on  with Reverb G1). Am I missing something or doing something wrong?

 

EDIT : Just figured out I had reprojection on in WMR AND SteamVR.  For some reason , putting the reprojection ALWAYS on in SteamVR doesn't actually do anything. The only way for me to get reprojection to work is by putting motionvector in the WMR text file. 

Edited May 11, 2021 by Bog9y

[ShaunX]

50 minutes ago, Bog9y said:

I just installed the shaders mod on a clean DCS install and my performance is actually worse now. Really weird, it would normally improve the performance but for some reason it makes it worse. My frame time went up from 22-ish ms to 30-40 ms (45 hz, reprojection on  with Reverb G1). Am I missing something or doing something wrong?

 

EDIT : Just figured out I had reprojection on in WMR AND SteamVR.  For some reason , putting the reprojection ALWAYS on in SteamVR doesn't actually do anything. The only way for me to get reprojection to work is by putting motionvector in the WMR text file. 

 

 

Do you have HAGS (Hardware-accelerated-GPU-scheduling) turned on in Windows settings-graphics settings. From memory I think this screws with the auto motion-reprojection mode. Try turning it off.

[speed-of-heat]

4 minutes ago, ShaunX said:

 

Do you have HAGS (Hardware-accelerated-GPU-scheduling) turned on in Windows settings-graphics settings. From memory I think this screws with the auto motion-reprojection mode. Try turning it off.

yep it does 

[Bog9y]

1 hour ago, ShaunX said:

 

Do you have HAGS (Hardware-accelerated-GPU-scheduling) turned on in Windows settings-graphics settings. From memory I think this screws with the auto motion-reprojection mode. Try turning it off.

HAGS is off. But I just noticed that my advanced display settings is showing 5 monitors! 1 is my monitor...not sure what the other 4 are but I assume it's my Reverb screens. I remember removing this option 6 months ago but have since reinstalled windows. Is it called something like virtual monitors?

[zildac]

29 minutes ago, Bog9y said:

HAGS is off. But I just noticed that my advanced display settings is showing 5 monitors! 1 is my monitor...not sure what the other 4 are but I assume it's my Reverb screens. I remember removing this option 6 months ago but have since reinstalled windows. Is it called something like virtual monitors?

Pre Allocated Monitors. They can be zapped via the registry or alternatively try this tool, it offers a bunch of additional features too

https://apollyonvr.wixsite.com/vrtools/windows-mixed-reality-tray-tweaker

Edited May 11, 2021 by zildac

[5ephir0th]

Any way to bring back VR mask option? 2.7 one looks that it dont work with Steam VR (it does with Oculus API)

[speed-of-heat]

It works for my headset on Steam VR just fine!  When you say it doesnt work have you logged a bug?

 

 

[5ephir0th]

On 5/14/2021 at 11:14 AM, speed-of-heat said:

It works for my headset on Steam VR just fine!  When you say it doesnt work have you logged a bug?

 

 

 

 

[speed-of-heat]

so this is not a bug/problem with this mod... 

[5ephir0th]

14 minutes ago, speed-of-heat said:

so this is not a bug/problem with this mod... 

Thats why im asking if theres a way of bring back the mask from this mod

[FupDuck]

On 5/6/2021 at 3:58 PM, speed-of-heat said:

Literally don’t have this problem, try this, remove the mod see if the reflections are still there,they will be… but do it so you understand what’s going on.

 

then download a mod to remove the reflections from the ka50, I use this one

 

 

This is interesting. I've been using this mod for a while now and always assumed that when I used it to make the glass transparent, it was also getting rid of reflections. But it's true, in the Ka-50, I still see the reflections too. 

 

So is that the case? The mod makes the glass 100% transparent, but still leaves reflections? I didn't think so, because in my Spitfire and other planes, I don't see reflections. Only seems to happen in the Ka-50. Curious! 

 

Thanks for the link to the Ka-50 reflections mod, by the way, installing it now! 

 

ETA I just wanted to add, this mod is incredible. Gets me from 32 fps and stuttering to an almost solid 45!

Edited May 15, 2021 by Sandmonkee

[speed-of-heat]

33 minutes ago, Sandmonkee said:

 

So is that the case? The mod makes the glass 100% transparent, but still leaves reflections? I didn't think so, because in my Spitfire and other planes, I don't see reflections. Only seems to happen in the Ka-50. Curious! 

curiouser and curiouser ... i still have reflections in my spitfire unless i mod them out same of all my other jets

 

43 minutes ago, 5ephir0th said:

Thats why im asking if theres a way of bring back the mask from this mod

you understand that most people dont now need the mask ... and that when its fixed you wont either

[5ephir0th]

5 minutes ago, speed-of-heat said:

curiouser and curiouser ... i still have reflections in my spitfire unless i mod them out same of all my other jets

 

you understand that most people dont now need the mask ... and that when its fixed you wont either

 

Man, i´m just asking if there´s a way, i never asked for a custom shader just for me or stated that my issue was due to the shader mod, take it easy...

Edited May 15, 2021 by 5ephir0th

[speed-of-heat]

to the best of my knowledge there is no way of re-enabling the mask by flipping a bit somewhere... if there is it would be by adding 

 

#define ENABLE_HMD_MASK       1 // Enable hidden area masking for HMD (adjust MASKSIZE to fit your headset)

 

into the _HMD.hlsl file, i honestly havent tried it and dont expect to work, but thats your best bet

[5ephir0th]

8 minutes ago, speed-of-heat said:

to the best of my knowledge there is no way of re-enabling the mask by flipping a bit somewhere... if there is it would be by adding 

 

#define ENABLE_HMD_MASK       1 // Enable hidden area masking for HMD (adjust MASKSIZE to fit your headset)

 

into the _HMD.hlsl file, i honestly havent tried it and dont expect to work, but thats your best bet

 

That was the first i tried but didn´t work, i tried too 2.5 shader version and (as expected) didn´t work neither but thanks.

[FupDuck]

50 minutes ago, speed-of-heat said:

curiouser and curiouser ... i still have reflections in my spitfire unless i mod them out same of all my other jets

 

you understand that most people dont now need the mask ... and that when its fixed you wont either

May I ask how you "mod out reflections"? Is there a file that can be edited for each plane? I thought that's what your mod was doing tbh.

[ShaunX]

33 minutes ago, 5ephir0th said:

 

That was the first i tried but didn´t work, i tried too 2.5 shader version and (as expected) didn´t work neither but thanks.

 

Do you have any pending Windows updates ?

I ask because I didn't get the ED VR Mask via SteamVR for a couple of weeks after 2.7, then it suddenly started working immediately following a Windows feature update for version 2004

 

 

[speed-of-heat]

24 minutes ago, Sandmonkee said:

May I ask how you "mod out reflections"? Is there a file that can be edited for each plane? I thought that's what your mod was doing tbh.

its not my MOD.

 

to answer your question, it depends on the aircraft, the viper and hornet both have options to remove the canopy reflections in game.  for others you have to edit out the refelections from the canopy glass image.  If you go to the mods/spitfire thread you can find it it there for spitfire other aircraft may also be available look for clear cockpit mod or similar

[Taz1004]

I'm having some issues with this mod and wanna throw it out there to see if any others are having same issues.

• First of all, loading time is unbearable.  The first time loading the module is huge (Syria takes about 20 minutes first time) but it seems like everytime it loads new asset, it takes extra time to recompile shaders for that new asset.  It did this in 2.5.6 too but not this long.  Was more like 5 minutes at most.
• MFD/HUD texts and lines are more jagged.
• There's couple second pause first time using Maverick.  I believe it's from recompiling shaders too.
• Performance hit of some of the improvements are pretty big now.  Albedo for example causes 1ms hit.
• Lastly, this is strange one.  I get about 3ms better performance with this mod.  But despite what the stat says, I get more ghosting with the mod.  It's actually smoother without it.

And I can't troubleshoot what's causing some of these issues because the loading time is so huge whenever I uninstall/reinstall the mod.

[speed-of-heat]

hmm initial load times are high but theey have always been that way for me, but nothing like 20 mins,  i do get that with new assets but its considerably shorter, not seeing additional jaggies on the hud though i know Iain says he gets a big Z through the raddar track.... or pauses on Maverick launches ... not sure about the smoothing in what mode is it not being smooth... did HAGS get turned on ?

Edited May 18, 2021 by speed-of-heat

[Taz1004]

5 minutes ago, speed-of-heat said:

hmm initial load times are high but theey have always been that way for me,  i do get that with new assets but its considerably shorter, not seeing additional jaggies on the hud though i know Iain says he gets a big Z through the raddar track.... or pauses on Maverick launches ... not sure about the smoothing in what mode is it not being smooth... did HAGS get turned on ?

 

HAGS is always off.  Ghosting from SteamVR motion smoothing is more apparent with this mod.  Like what I posted while back below.  This doesn't happen or is very minimal without the mod despite higher ms.

 

 

Edited May 18, 2021 by Taz1004

[speed-of-heat]

very odd! i'm definately not seeing that but i normally only use my clear water version off the mod... but i havent seen anything like that, certainly not in the KA 50

Edited May 18, 2021 by speed-of-heat

[Taz1004]

42 minutes ago, speed-of-heat said:

very odd! i'm definately not seeing that but i normally only use my clear water version off the mod... but i havent seen anything like that, certainly not in the KA 50

 

 

I should try your version as my suspicion is on the GBuffer.

[speed-of-heat]

Could be, I know I kill out the gbuffer component to get the water to work