skywalker22 Posted January 13 Share Posted January 13 (edited) It seems I cannot make the v2.3.1 run. It keeps on showing "No connection to DCS" text. I uninstalled completely v2.4.1. Then I edited the text inside the Export.lue file to: local TheWayLfs=require('lfs'); dofile(TheWayLfs.writedir()..'Scripts/TheWay.lua') sinice v.2.3.1 has no folder "\Scripts\TheWay" like v2.4. Also copied TheWay.lua inside the Scripts folder. What else am I missing here? C:\Users\username\AppData\Roaming\theway is only 6MB big. Is that enough? Edited January 13 by skywalker22 Link to comment Share on other sites More sharing options...
skywalker22 Posted January 13 Share Posted January 13 Its working now. I reinstalled the app ones again, and some how now works, although I didn't do anything different then before when uninstall and install it again. Glad that it works Link to comment Share on other sites More sharing options...
Thedoc_tv Posted January 21 Share Posted January 21 Amazing app. Do you plan on adding the possibility to choose the type of waypoint I want to store (target, markpoint, hazard, control measure etc..)? Link to comment Share on other sites More sharing options...
skywalker22 Posted January 22 Share Posted January 22 (edited) What I was also wondering for the F-16 (can't talk for the other planes), is it possible that the steerpoint on HSD would be designated as normal steerpoint (as you create it in mission editor) as a circle? Now each steerpoint created with this app is somekind of an asterix. And to connect these newly created steerpoints is not possible to connect with a line, right? Like by default. Edited January 22 by skywalker22 Link to comment Share on other sites More sharing options...
Comrade Doge Posted January 25 Author Share Posted January 25 On 1/21/2024 at 11:15 AM, Thedoc_tv said: Amazing app. Do you plan on adding the possibility to choose the type of waypoint I want to store (target, markpoint, hazard, control measure etc..)? Yes this is in the plans for the Apache, the more I fly it the sooner I'm gonna make it On 1/22/2024 at 8:49 AM, skywalker22 said: What I was also wondering for the F-16 (can't talk for the other planes), is it possible that the steerpoint on HSD would be designated as normal steerpoint (as you create it in mission editor) as a circle? Now each steerpoint created with this app is somekind of an asterix. And to connect these newly created steerpoints is not possible to connect with a line, right? Like by default. Make sure you are not actually creating a mark point, that would be represented as a cross on the HSD. Generally if you don't choose too higher STPT numbers you won't run into the mark point data bank 1 Link to comment Share on other sites More sharing options...
Mapi Posted January 25 Share Posted January 25 ----- F-16C ----- (steerpoints 1-25) > steerpoints 1-20 (auto) > steerpoints 21-25 (only man) Active Navigation Route (white line) steerpoints 1-25. > Steerpoints 26-30 are reserved as markpoints >>> The Bullseye point <<< is normally set to Steerpoint 25 but can be set to a different steerpoint on the BULL DED page. Each subsequent markpoint that is stored will overwrite steerpoints 26-30 in a cyclic fashion. Maybe it can help Link to comment Share on other sites More sharing options...
Kurald Posted February 13 Share Posted February 13 I'm trying to get it to work in an A-10C on a pretense server where I selected a mission (and thus already have some waypoints). It works connection wise, I can set-up waypoints in the gui using the F10 map. But when I click "transfer to DCS", I immediately get a CDU error displayed in the A-10. I already upped the delay to 100ms. Anything that I could have done wrong or any information how I could debug the issue? Link to comment Share on other sites More sharing options...
Comrade Doge Posted February 25 Author Share Posted February 25 Hello everyone, please check the newest release with the following bugfixes: Fixed crash on exiting DCS Fixed not being able to select waypoints on water using keybinds Important! To update to this version from an older one, replace your existing TheWay folder found in Saved Games/DCS/Scripts with the new one, overriding any modified files. Then, run the new installer. No need to modify the Export.lua file. Download link here: https://github.com/aronCiucu/DCSTheWay/releases/tag/v2.4.2 1 2 Link to comment Share on other sites More sharing options...
Luthor033 Posted February 27 Share Posted February 27 VR issue Ciao. Super mod that help us a lot. Thank you. It will help VR users a lot to have a joystick key mapping. At the moment, when I make a waypoint on the map I need to take off my VR and use my mouse on the monitor or on the keyboard to find the right buttons to memorize and transfer in the CDU. Instead If you give us a joystick key mapping, we will do everything inside the VR. Do you have in program to realize it ? Link to comment Share on other sites More sharing options...
jonsky7 Posted February 27 Share Posted February 27 (edited) 3 hours ago, Luthor033 said: VR issue Ciao. Super mod that help us a lot. Thank you. It will help VR users a lot to have a joystick key mapping. At the moment, when I make a waypoint on the map I need to take off my VR and use my mouse on the monitor or on the keyboard to find the right buttons to memorize and transfer in the CDU. Instead If you give us a joystick key mapping, we will do everything inside the VR. Do you have in program to realize it ? You could probably use VoiceAttack to do this if there is nothing else. Voice attack usually works by performing keypresses and other things when you say a command, but you can also program voice attack to do a command when you press a key, or a joystick button. So when you press a joystick button you can have voice attack press a key, or multiple keys like LCTRL+A for example. You can also program voice attack to move the mouse pointer to a specific point on your monitor. As long as "TheWay" opens in the same place each time you run it, that should be good. You can also program voice attack to move the mouse and then press a mouse button. The free version of Voice Attack let's you have 20 seperate commands IIRC, and each command can do multiple steps. Eg Move the mouse pointer Press Left mouse button Move the mouse pointer Press right mouse button Play a sound. Just an idea Edited February 27 by jonsky7 2 Link to comment Share on other sites More sharing options...
shinobi61 Posted February 28 Share Posted February 28 (edited) Just found TheWay last week got it working no issues on my last PC, got a new PC yesterday and i just cant get it working at all, just got the "no Connection to DCS" message in the app, I've uninstalled/re-enstalled, made exceptions for everything i can think DCS related in windef, just out of ideas probably something silly ive missed but i cant figure it out any ideas? regards Nevermind its randomly started to work for .... reasons i dont know what was the issue but heh its working Edited February 28 by shinobi61 Link to comment Share on other sites More sharing options...
scout1513 Posted March 3 Share Posted March 3 The Way V 2.4.2, please help. (Both VR and 2D) Installed the apps as instructed (copy "Theway" folder, edited the "export.lua", Installer run. The apps started, and showing connected to my plane in DCS (A10C2), I have setup key bindings CTRL + SHIFT + X (Toggle Crosshair) CTRL + SHIFT + S (Save Waypoint) CTRL + SHIFT + D (Delete Last Waypoint) CTRL + SHIFT + A (Delete All Waypoints) CTRL + SHIFT + T (Transfer Waypoints). Nothing change when I use any of the above key bindings. I can save the waypoint by pressing the green tab "Save" on Theway control screen, the Lat/Lon save a waypoint with correct information. But I cannot export/transfer the WP to DCS. Anyone can help? Thanks. Link to comment Share on other sites More sharing options...
Lange_666 Posted March 3 Share Posted March 3 (edited) Did you have an older version installed before 2.4.2? I still had 1.5.1 installed. After upgrading to the latest (I just ran the latest installer thinking it would be enough) it didn't work either anymore. Did some investigation it turned out there is another spelling in the TheWay folder (the older one had a space in it) that needs to go into the scripts' folder + the line to copy into the export.lua was different too. After these corrections it worked. Edited March 3 by Lange_666 Win11 Pro 64-bit, Ryzen 5800X3D, Corsair H115i, Gigabyte X570S UD, EVGA 3080Ti XC3 Ultra 12GB, 64 GB DDR4 G.Skill 3600. Monitors: LG 27GL850-B27 2560x1440 + Samsung SyncMaster 2443 1920x1200, HOTAS: Warthog with Virpil WarBRD base, MFG Crosswind combat pedals, TrackIR4, Rift-S. Personal Wish List: A6 Intruder, Vietnam theater, decent ATC module, better VR performance! Link to comment Share on other sites More sharing options...
gazzy5 Posted March 5 Share Posted March 5 (edited) Hey, I'm having and issue in which I do not get a connection to DCS denullspite following the install instructions to the letter including that it was a clean install of TheWay. still scratching my head on what the potential issue is. could it potentially have something to do with DCS being on a external hard drive? Edited March 5 by gazzy5 Link to comment Share on other sites More sharing options...
Thorns Posted March 6 Share Posted March 6 When putting a green dot over point like a tank in F10, what is the best way? Should it be marked at the tanks elevation? Seems it can be off quite a bit when getting a Maverick ready, so I'm trying to get a better way of getting closer to the tank...yes, I know how to move the pointer. Link to comment Share on other sites More sharing options...
Warpig37 Posted March 13 Share Posted March 13 Hello. Please help. I've installed The Way 2 as prescribed, yet still can't connect to DCS. I've attached what I believe to be right. Link to comment Share on other sites More sharing options...
Lange_666 Posted March 13 Share Posted March 13 I "guess" you need to remove V242 from the name of the TheWayV242 folder. Win11 Pro 64-bit, Ryzen 5800X3D, Corsair H115i, Gigabyte X570S UD, EVGA 3080Ti XC3 Ultra 12GB, 64 GB DDR4 G.Skill 3600. Monitors: LG 27GL850-B27 2560x1440 + Samsung SyncMaster 2443 1920x1200, HOTAS: Warthog with Virpil WarBRD base, MFG Crosswind combat pedals, TrackIR4, Rift-S. Personal Wish List: A6 Intruder, Vietnam theater, decent ATC module, better VR performance! Link to comment Share on other sites More sharing options...
minimi66 Posted March 25 Share Posted March 25 Hey guys, Just installed today and all working ok other than the little green crosshair dot won't go away even after closing The Way app? Its still perched smack dab in the middle of my DCS screen? Using the Toggle Crosshair hotkey (CTL-ALT-X) i set up does nothing either? Any ideas? Thanks. Windows 10 Pro 64-bit - Intel Core i9-13900K - 64GB Corsair Vengeance RAM @ 3200 MHz - ASUS TUF GAMING B660-PLUS WIFI D4 - Zotac NVIDIA GeForce RTX 4090 - 2TB INTEL NVMe SSD (Windows 10) - Samsung SSD 970 EVO Plus 1TB (DCS) - Crucial CT1000 1TB NVMe SSD - WinWing F-16EX Stick - WinWing Orion Throttle Base with both F-18 & F-16C TQS Throttle Grips - Saitek Pro Rudder Pedals - Logitech G-910 Keyboard - Logitech G-502 Lightspeed Mouse - Logitech G-533 Headset - Occulus Quest Pro VR - TrackIR 5 with Track Clip Pro Link to comment Share on other sites More sharing options...
PeeJott17 Posted March 27 Share Posted March 27 @Comrade DogeThis is one piece of very cool software. Thanks a lot. Makes waypoint-editing sooo much more fun (and a lot less painful). I was wondering how you transfer the waypoints into the planes systems. I'm one of the Devs from VSN and your App would come in very handy for our F-4B/C and upcoming standalone Mods for multiplayer use. Right now, we are reading the waypoints from the mission itself. Is there a possibility to read the waypoints from TheWay somehow? It transfer the waypoints somewhere and I guess they do not get set in the mission itself? Link to comment Share on other sites More sharing options...
Lange_666 Posted March 27 Share Posted March 27 There's a button "Transfer to DCS". Once you have set your waypoints, revert to the plane's cockpit press the "Transfer to DCS" button. This will then transfer the waypoints into the plane's NAV system. You'll see The Way do its job, just like you would do it yourself manually. Win11 Pro 64-bit, Ryzen 5800X3D, Corsair H115i, Gigabyte X570S UD, EVGA 3080Ti XC3 Ultra 12GB, 64 GB DDR4 G.Skill 3600. Monitors: LG 27GL850-B27 2560x1440 + Samsung SyncMaster 2443 1920x1200, HOTAS: Warthog with Virpil WarBRD base, MFG Crosswind combat pedals, TrackIR4, Rift-S. Personal Wish List: A6 Intruder, Vietnam theater, decent ATC module, better VR performance! Link to comment Share on other sites More sharing options...
Cobb Posted March 29 Share Posted March 29 How do we set up the CTRL + SHIFT + (key)? I can get the CTRL or SHIFT to show in the Keybindings setup, but not both. Link to comment Share on other sites More sharing options...
Comrade Doge Posted March 29 Author Share Posted March 29 On 3/25/2024 at 8:37 PM, minimi66 said: Hey guys, Just installed today and all working ok other than the little green crosshair dot won't go away even after closing The Way app? Its still perched smack dab in the middle of my DCS screen? Using the Toggle Crosshair hotkey (CTL-ALT-X) i set up does nothing either? Any ideas? Thanks. Hello, try starting theway again and opening/closing the crosshair. It should reset itself. On 3/27/2024 at 7:12 PM, PeeJott17 said: @Comrade DogeThis is one piece of very cool software. Thanks a lot. Makes waypoint-editing sooo much more fun (and a lot less painful). I was wondering how you transfer the waypoints into the planes systems. I'm one of the Devs from VSN and your App would come in very handy for our F-4B/C and upcoming standalone Mods for multiplayer use. Right now, we are reading the waypoints from the mission itself. Is there a possibility to read the waypoints from TheWay somehow? It transfer the waypoints somewhere and I guess they do not get set in the mission itself? Hello, TheWay can save the waypoints to a file, as well as being transferred in the jet. Simply click the download icon in the bottom left corner to save the waypoints in a json format. 1 hour ago, Cobb said: How do we set up the CTRL + SHIFT + (key)? I can get the CTRL or SHIFT to show in the Keybindings setup, but not both. It should work if you hold ctrl, then hold shift, and then the next key. If it doesn't, PM me and we'll take a closer look Link to comment Share on other sites More sharing options...
Chipse Posted April 2 Share Posted April 2 Hi all, I'm new to DCS, and I have been trying to install the way V2.4.2 and V2.4.1 for over an hour, but the installer simply doesn't work at all. I double click it, or run as administrator, and still getting no reaction at all from my PC, not even an installation error message. I'm installing it on Windows 11. If anyone have any clue why the installer isn't working, please let me know. thanks Link to comment Share on other sites More sharing options...
Lange_666 Posted April 2 Share Posted April 2 (edited) When run it (should) install automatically into: C:\Users\Your Name\AppData\Local\Programs\theway But you should see (only briefly) an installer window, no option to select where to install though. Edited April 2 by Lange_666 Win11 Pro 64-bit, Ryzen 5800X3D, Corsair H115i, Gigabyte X570S UD, EVGA 3080Ti XC3 Ultra 12GB, 64 GB DDR4 G.Skill 3600. Monitors: LG 27GL850-B27 2560x1440 + Samsung SyncMaster 2443 1920x1200, HOTAS: Warthog with Virpil WarBRD base, MFG Crosswind combat pedals, TrackIR4, Rift-S. Personal Wish List: A6 Intruder, Vietnam theater, decent ATC module, better VR performance! Link to comment Share on other sites More sharing options...
Chipse Posted April 2 Share Posted April 2 I don't think the installer starts / works at all. I also didn't find the AppData folder inside my user folder! Link to comment Share on other sites More sharing options...
Recommended Posts