Jump to content

MMS Slewing problem

hreich

By hreich
in Bugs and Problems

 Share

Recommended Posts

hreich

hreich

Posted
Posted (edited)

I us tm warthog hotas, and using slew controller on throttle, MMS sometimes stops slowing while i am holding full deflection of a slew stick?

Does anybody have same problem?  I also tried using PS4 controller i use for TEDAC in apache, same thing..So it's not joystick related

Edited by hreich
  • Like 7

[sIGPIC][/sIGPIC]

Pilot from Croatia

GrEaSeLiTeNiN

GrEaSeLiTeNiN

Posted
Posted

I have a bit of an issue with slewing the MMS using a 4-way HAT on my warthog stick. It's fine with LOS slewing. But for ACQ on the Move, the diamond disappears if I stop the slewing action before locking a target. So I have to slew accurately to the desired target in one continuous motion.

AMD Ryzen 5 5600X | Gigabyte RTX 3070 Gaming OC 8GB | 64GB G.SKILL TRIDENT Z4 neo DDR4 3600Mhz | Asus B550 TUF Plus Gaming | 2TB Aorus Gen4
TM Warthog HOTAS | TrackIR 5 | Windows 10 Home x64 | My HOTAS Profiles

Goofy12

Goofy12

Posted
Posted

Same thing, I use an extra TM joystick for slewing, but it does randomly stop. Deflections in the Axis configuration menu are all good, so its not the joystick.

  • Like 1
Moxica

Moxica

Posted
Posted

Me to, Warthog throttle.
Same on the Gazelle.

ASUS ROG Strix B550-E GAMING - PNY GeForce RTX 4090 Gaming VERTO EPIC-X  - AMD Ryzen 9 5900X - 64Gb RAM - 2x2Tb M2 - Win11 - Pimax crystal light - HP Reverb g2 - Oculus Quest 2 - Thrustmaster Warthog HOTAS - Thrustmaster Pendular Rudder - 2X Thrustmaster MFD Cougar - Audient EVO8

sandpatch

sandpatch

Posted
Posted (edited)

I think I found the reason.

When I go full left (X-axis) and then go up and down at the same time, when crossing the Y-Axis it stops. I need to go to zero and start again.

 

But if I move more up or down past the axis, it seems to work.

 

Same actually applies to the Y-axis when crossing the X-axis

Edited by sandpatch
  • Like 1
Fakum

Fakum

Posted
Posted

Same for me. Virpil CM3 throttle as well

  • Like 1

Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle

 

Rocky49

Rocky49

Posted
Posted

I have another thread with controlling the MMS with my STECS.  I can not seem to slow down the travel of the Mini stick no matter how little pressure I put on direction of travel.

System:Motherboard Asus ROG Strix Z390-E,Asus ROG GeForce RTX 2080Ti OC, GPU, 32GB Corsair Vengeance DDR4 Ram, Intel i9 9900K @ 5 GHz , cooled by NZXT Kraken X52, Acer XB270HU G-Sinc monitor, Windows 10 Pro, Warthog joystick and throttle with wasy extension, VBK Gunfighter Pro and MCG Pro,MFG Rudder, running on a dedicated 1TB Samsung 970 Pro M2 Nvme , Super Wheel Stand Pro, with a HP Reverb G2

sandpatch

sandpatch

Posted
Posted
On 6/12/2024 at 8:02 PM, hreich said:

I us tm warthog hotas, and using slew controller on throttle, MMS sometimes stops slowing while i am holding full deflection of a slew stick?

Does anybody have same problem?  I also tried using PS4 controller i use for TEDAC in apache, same thing..So it's not joystick related

 

Can you confirm that you have the same problem as I have mentioned above?

Rocky49

Rocky49

Posted
Posted (edited)

My mini-stick is uncontrollable.  I try to scroll slowly and it starts to speed up and then it moves up or down and stops.  It acts the same way in both axis, horizonal and vertical. I have tried changing the saturation and adding  curves not change at all

Edited by Rocky49

System:Motherboard Asus ROG Strix Z390-E,Asus ROG GeForce RTX 2080Ti OC, GPU, 32GB Corsair Vengeance DDR4 Ram, Intel i9 9900K @ 5 GHz , cooled by NZXT Kraken X52, Acer XB270HU G-Sinc monitor, Windows 10 Pro, Warthog joystick and throttle with wasy extension, VBK Gunfighter Pro and MCG Pro,MFG Rudder, running on a dedicated 1TB Samsung 970 Pro M2 Nvme , Super Wheel Stand Pro, with a HP Reverb G2

YoYo

YoYo

Posted
Posted
On 6/12/2024 at 8:02 PM, hreich said:

I us tm warthog hotas, and using slew controller on throttle, MMS sometimes stops slowing while i am holding full deflection of a slew stick?

Does anybody have same problem?  I also tried using PS4 controller i use for TEDAC in apache, same thing..So it's not joystick related

 

Correct, the same, its a bug.

Webmaster of http://www.yoyosims.pl

Yoyosimsbanner.gif

Win 10 64, i9-13900 KF, RTX  5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

some1

some1

Posted
Posted
On 6/13/2024 at 4:24 PM, sandpatch said:

I think I found the reason.

When I go full left (X-axis) and then go up and down at the same time, when crossing the Y-Axis it stops. I need to go to zero and start again.

 

But if I move more up or down past the axis, it seems to work.

 

Same actually applies to the Y-axis when crossing the X-axis

 

Yes, that's the issue.

  • Like 1

Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil WarBRD, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro

sandpatch

sandpatch

Posted
Posted
On 6/14/2024 at 12:33 AM, Rocky49 said:

My mini-stick is uncontrollable.  I try to scroll slowly and it starts to speed up and then it moves up or down and stops.  It acts the same way in both axis, horizonal and vertical. I have tried changing the saturation and adding  curves not change at all

 

Hello, I just have to ask, are you by any chance in the FWD mode and not the manual?

Rocky49

Rocky49

Posted
Posted

Yes, that was the issue!!!  Feel kinda stupid for not noticing that.

  • Like 1

System:Motherboard Asus ROG Strix Z390-E,Asus ROG GeForce RTX 2080Ti OC, GPU, 32GB Corsair Vengeance DDR4 Ram, Intel i9 9900K @ 5 GHz , cooled by NZXT Kraken X52, Acer XB270HU G-Sinc monitor, Windows 10 Pro, Warthog joystick and throttle with wasy extension, VBK Gunfighter Pro and MCG Pro,MFG Rudder, running on a dedicated 1TB Samsung 970 Pro M2 Nvme , Super Wheel Stand Pro, with a HP Reverb G2

YoYo

YoYo

Posted
Posted

The problem is when we actually connect the axles. Perhaps it is not available with keyboard operation, or HAT, which has only 4-ways positions. However, if we use a mini joystick for SLEW (example TH Warthog ect.), the problem occurs and jams occur. It's simply impossible to control the X and Y axes perfectly, there will always be some shift, as a result of which the MMS cursor freezes on the screen.

Please fix it @Polychop Simulations for incoming, 26th of June patch. This is one of the priorities.

  • Like 5

Webmaster of http://www.yoyosims.pl

Yoyosimsbanner.gif

Win 10 64, i9-13900 KF, RTX  5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

Fakum

Fakum

Posted
Posted

I 2nd that, yes, plz fix as a priority!

 

Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle

 

QuiGon

QuiGon

Posted
Posted (edited)

I also second that. The MMS is hardly usable atm when using an analog slew hat like on the TM Warthog throttle.

Edited by QuiGon
  • Like 1

Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit

DCS Panavia Tornado (IDS) really needs to be a thing!

Tornado3 small.jpg

dresoccer4

dresoccer4

Posted
Posted

just bought this bird and I ran into this problem almost immediately

+1

  • Like 1

Acer Predator Triton 700 || i7-7700HQ || 512GB SSD || 32GB RAM || GTX1080 Max-Q || FFB II and Thrustmaster TWCS Throttle || All DCS Modules

LuseKofte

LuseKofte

Posted
Posted
On 6/20/2024 at 4:27 PM, QuiGon said:

I also second that. The MMS is hardly usable atm when using an analog slew hat like on the TM Warthog throttle.

 

I use analog ah 64 grip for collective. Anis binding it is smooth. 

  • 2 weeks later...
audiman

audiman

Posted
Posted

Same issue for me, using the thumb min-stick on the stick of an X56 Hotas. Tried using the mini-stick on the throttle and same issue occurs.

  • Like 1

DCS Modules so far...: F/A-18C Hornet(my first DCS love), F-14 Tomcat(childhood favorite Fighter), AH-64D Apache(only a 30% chance I'll enter VRS...), F-15E Strike Eagle(Missilebombertanker Jet)

System Specs: Ryzen 7 5800X, Asus Tuf Gaming OC RTX3080, 32GB Corsair Vengeance 3600Mhz Ram, MSI X570 Mobo, Corsair H150i Elite RGB AIO, 6x Lian Li SL120RGB fans, 1TB 970Evo(boot drive), 1TB 980 Pro(DCS), 2TB Crucial MX500 Sata SSD(overflow), Corsair 4000D Airflow case

BobCee123

BobCee123

Posted
Posted

Definitely seems like an issue with slewing MMS. I'm using my analog stick on my TM Warthog Throttle, but also have the same issue when I disconnected my throttle and set up one of the analog sticks on an X-box remote.

I use the X-box remote when in the AH-64 and have no such issues at all.

Hopefully Polychop have managed to recreate this issue and find the cause.

Loving this module so far. I wish the AH-64 could get a similar AI interface.

  • Like 1
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...