Bremspropeller Posted Monday at 05:41 PM Posted Monday at 05:41 PM 33 minutes ago, Кош said: It's a known claim but no. Already solved in Ru part of forums with SME and mechanical scheme. There is phisically two positions for flap, and leading edge - leading edge is scheduled independently for optimal performance at all times. So the third button (Land) positively has no effect or function and is not tied to anything whatsoever? 1 So ein Feuerball, JUNGE!
ED Team NineLine Posted Monday at 06:42 PM ED Team Posted Monday at 06:42 PM 1 hour ago, Кош said: It's a known claim but no. Already solved in Ru part of forums with SME and mechanical scheme. There is phisically two positions for flap, and leading edge - leading edge is scheduled independently for optimal performance at all times. Are you saying they have reported the issue on the Ru side? Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug**
Solution TGP14 Posted Monday at 07:32 PM Solution Posted Monday at 07:32 PM (edited) On 9/22/2025 at 8:42 PM, NineLine said: Are you saying they have reported the issue on the Ru side? I interpret what was meant was that this was already discussed and cleared up on the Ru side. I read the same thing on a separate English forum that there is a misconception among us users about the flap panel, ie. people think its 3 buttons that only do 2 settings versus it possibly being 3 buttons with 3 different settings (ex. Up, TO Flap + TO Scheduled Slats, LDG + LDG Scheduled Slats rather than possibly just a Flaps Up or Down with an unused/mimicked middle button). It's more a comment on how there maybe an explanation on the Ru side, perhaps worth making a note of this in the manual later down the road as it is both a very relevant system and of course just interesting technical knowledge (if its correct of course)! Edited 7 hours ago by TGP14 1 1
AeriaGloria Posted Monday at 07:43 PM Posted Monday at 07:43 PM (edited) 3 hours ago, BIGNEWY said: Hi, takeoff and landing schedule the leading edge flaps differently. I would really love clarification for this. Becuase as far as I can tell in my testing, the leading edge flaps are down all the time with both settings. And nothing I could do could make them go up in “takeoff” flaps. And the LEF only have two settings, down or up. Edited Monday at 07:44 PM by AeriaGloria 1 Black Shark Den Squadron Member: We are open to new recruits, click here to check us out or apply to join! https://blacksharkden.com
ED Team NineLine Posted Monday at 08:00 PM ED Team Posted Monday at 08:00 PM 27 minutes ago, TGP14 said: I believe what was meant was that this was already discussed and cleared up on the Ru side. I read the same thing on a separate English forum that there is a misconception among us users about the flap panel, ie. people think its 3 buttons that only do 2 settings versus the reality of it being 3 buttons with 3 different settings as per some Mig-29 manual or documentation (Up, TO Flap + TO Scheduled Slats, LDG + LDG Scheduled Slats rather than what some assumed was just Flaps Up or Down with an unused middle button). It's more a comment on how the misconception above has been explained on the Ru side, perhaps worth making a note of this in the manual later down the road as it is both a very relevant system and of course just interesting technical knowledge (if its correct of course)! Perfect, thanks 1 Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug**
TGP14 Posted Monday at 09:53 PM Posted Monday at 09:53 PM (edited) Happy to try and help. Edited Tuesday at 04:37 PM by TGP14
Bremspropeller Posted Monday at 11:25 PM Posted Monday at 11:25 PM 3 hours ago, AeriaGloria said: I would really love clarification for this. Becuase as far as I can tell in my testing, the leading edge flaps are down all the time with both settings. And nothing I could do could make them go up in “takeoff” flaps. And the LEF only have two settings, down or up. The G manual says - maneuvering LEFs come down whenever necessary (AoA greater 8.7° and M less than 0.8 {+/-} and retracting when above said Mach or below 7° AoA) - LEF come down with flaps selected down - LEF come down with gear selected down (gear down overrides flap up) There's no mention of different LEF schedules and it just mentions one UP and two DOWN buttons. "Pushing either DOWN button extends all flaps. Pushing the UP button retracts flaps and LEF, provided gear is up." So ein Feuerball, JUNGE!
AeriaGloria Posted Monday at 11:27 PM Posted Monday at 11:27 PM 1 minute ago, Bremspropeller said: The G manual says - maneuvering LEFs come down whenever necessary (AoA greater 8.7° and M less than 0.8 {+/-} and retracting when above said Mach or below 7° AoA) - LEF come down with flaps selected down - LEF come down with gear selected down (gear down overrides flap up) There's no mention of different LEF schedules and it just mentions one UP and two DOWN buttons. "Pushing either DOWN button extends all flaps. Pushing the UP button retracts flaps and LEF, provided gear is up." Or the aero manual. Black Shark Den Squadron Member: We are open to new recruits, click here to check us out or apply to join! https://blacksharkden.com
Bremspropeller Posted Monday at 11:30 PM Posted Monday at 11:30 PM So it is three buttons for two functions. And as the flaps are blown up by airloads, they could have just left out the entire box and tie them to the gear-handle 1 So ein Feuerball, JUNGE!
Кош Posted Tuesday at 08:03 AM Posted Tuesday at 08:03 AM (edited) 14 часов назад, Bremspropeller сказал: So the third button (Land) positively has no effect or function and is not tied to anything whatsoever? It's soldered to the same cable as second button. Pilot in Ru forums said you can normally use either button but for consistency of procedures everybody agreed to use button 2 both for takeoff and landing. The block is re-used from MiG-23 where takeoff and landing settings were indeed different. Edited Tuesday at 08:08 AM by Кош 3 2 ППС АВТ 100 60 36 Ф < | > ! ПД К i5-10600k/32GB 3600/SSD NVME/4070ti/2560x1440'32/VPC T-50 VPC T-50CM3 throttle Saitek combat rudder
CF104 Posted Tuesday at 11:33 AM Posted Tuesday at 11:33 AM 19 hours ago, BIGNEWY said: Hi, takeoff and landing schedule the leading edge flaps differently. No they don't. See the following for a description of the proper operation.
TGP14 Posted Tuesday at 04:47 PM Posted Tuesday at 04:47 PM 8 hours ago, Кош said: It's soldered to the same cable as second button. Pilot in Ru forums said you can normally use either button but for consistency of procedures everybody agreed to use button 2 both for takeoff and landing. The block is re-used from MiG-23 where takeoff and landing settings were indeed different. If this is the case, then we really need this to be cleared up in the module's manual, as I've seen different takes from within the forums which are causing confusion. I understand the manual is probably a low priority at the moment but if there is a good clear source on how the system works I think we'd all love to have it even just marked as a special note where the panel is described, at least for the time being. It would greatly help those of us with lesser knowledge of the aircraft to study it and learn it more correctly! @NineLine Hate to bother you with something that I can probably do, however, I don't know how to mark or unmark my comment as a solution, and with the added info above that would make my understanding of previous comments incorrect. Is there anyway to "unmark" my comment as a solution?
draconus Posted 10 hours ago Posted 10 hours ago On 9/23/2025 at 6:47 PM, TGP14 said: @NineLine Hate to bother you with something that I can probably do, however, I don't know how to mark or unmark my comment as a solution, and with the added info above that would make my understanding of previous comments incorrect. Is there anyway to "unmark" my comment as a solution? The thread was started by HoMeBoY, and only the OP (and moderators) is able to mark/unmark the solution. However since solution points to your post, you can edit it with new info - best to add text and use strikethrough for the wrong parts. 1 Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 MiG-29A F-14A/B F-15E CA SC NTTR PG Syria
TGP14 Posted 7 hours ago Posted 7 hours ago 3 hours ago, draconus said: The thread was started by HoMeBoY, and only the OP (and moderators) is able to mark/unmark the solution. However since solution points to your post, you can edit it with new info - best to add text and use strikethrough for the wrong parts. Thanks Draconus, edited and hopefully clearer now, appreciate the help and input as a relatively new user of this forum! 1
Flаnker Posted 7 hours ago Posted 7 hours ago В 22.09.2025 в 20:41, Bremspropeller сказал: So the third button (Land) positively has no effect or function and is not tied to anything whatsoever? Yes. The flap positions are the same. This control panel was used on the MiG-23 (there was a difference there), so it has three buttons. 2 Мои авиафото
Recommended Posts