Slayer Posted August 15, 2012 Posted August 15, 2012 Take a look at this : http://www.power-grid.roccat.org/?page=overview I see lots of possibilities for using this. The iOS version beta is under way and now they need Android testers. Sounds like the app will be free and you have to pay if you want more than 2 "tabs" I'm excited cause theres really nothing worthwhile for Android currently... [sIGPIC][/sIGPIC] System Specs Intel I7-3930K, Asrock EXTREME9, EVGA TITAN, Mushkin Chronos SSD, 16GB G.SKILL Ripjaws Z series 2133, TM Warthog and MFD's, Saitek Proflight Combat pedals, TrackIR 5 + TrackClip PRO, Windows 7 x64, 3-Asus VS2248H-P monitors, Thermaltake Level 10 GT, Obutto cockpit
MA_Goblin Posted April 8, 2014 Posted April 8, 2014 (edited) Any-one tried this? Edited April 8, 2014 by hakjar [sIGPIC][/sIGPIC] _____________Semper paratus, In hoc signo vinces________________ PC: Intel i7-8700K (4.9 GHz), Aorus Ultra Gaming Z370 MB, Gigabyte RTX 3080, 32 GB DDR3 (3,2 GHz), Samsung EVO 860 M.2 500 GB SSD + Samsung 960 M.2 250 GB SSD Gaming: Virpil T-50 CM2, TM WH Throttle, Crosswind pedals, HP Reverb
Arcto10 Posted December 18, 2014 Posted December 18, 2014 http://power-grid.roccat.org/en/Store/Grids/Games/Simulation/351/ UFC panel now available. I will try test this Monday next week as will not get a chance till then. Anyone know if it is possible to change this to the CDU panel? (Even though they are very similar when entering UTM codes I still prefer the layout of the CDU).
Abburo Posted September 22, 2015 Posted September 22, 2015 Just found out myself this software :), however I see there is not much discussions about it over here. I will give it a try ASAP but it looks for me extremly promising. Is anybody experiencing bad things about it? Romanian Community for DCS World HW Specs: AMD 7900X, 64GB RAM, RTX 4090, HOTAS Virpil, MFG, CLS-E, custom
=Andre= Posted September 23, 2015 Posted September 23, 2015 Just found out myself this software :), however I see there is not much discussions about it over here. I will give it a try ASAP but it looks for me extremly promising. Is anybody experiencing bad things about it? Hi gents, I'm playing around with that software. Looks great, but I have encountered one serious restriction: out of the box it can't send combinations with Right CTRL key. I'm trying to build workaround solution for DCS. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
=Andre= Posted October 17, 2015 Posted October 17, 2015 Hi gents, here is my initial Plugin for DCS World design. One control set for FC3 plane: Su-27 commands (279 virtual buttons); Two control sets for DCS planes: A-10C commands (839 virtual buttons) and L-39C commands (290 virtual buttons); One control set for DCS helicopter: UH-1H commands (493 virtual buttons). Please give it a try. If you like it, feel free to support the project or ask for a free key. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
redrapter Posted April 19, 2016 Posted April 19, 2016 I have a problem with this app, when i run dcs only works the volumen controls, heeeelllppppp [sIGPIC][/sIGPIC]
AstroEma Posted April 19, 2016 Posted April 19, 2016 I have a problem with this app, when i run dcs only works the volumen controls, heeeelllppppp You need to assign the correct keystrokes to the Power Grid... Kaby Lake @ 4.6Ghz - Gigabyte Z170-D3H - 16Gb DDR4 - Gigabyte GTX 1080 G1 OC - Samsung EVO 250Gb SSD - Seagate 1 Tb HDD - HTC Vive - Rift CV1
spaceraver Posted April 19, 2016 Posted April 19, 2016 I have used this program for years, some things are a bit hit and miss, but for what I needed it to do it worked perfectly. Never could get it to work with DCS before Andre took on the project. Thanks Andre. Anything with a Rotary Wing is fun and challenging. Use SRS radio. Saitek X55 Modding System Specs Mixed Metals: i7 4790K@4.6, 32GB Kingston HyperX ram@2400Mhz, Gigabyte GA-Z97MX Gaming 5, ASUS Vega 64, 3xSamsung SSD drives, FSP Aurum 1000W PSU, Custom watercooling with EK blocks, Vive, Virpil MT 50, X55 throttle.
=Andre= Posted April 19, 2016 Posted April 19, 2016 I have used this program for years, some things are a bit hit and miss, but for what I needed it to do it worked perfectly. Never could get it to work with DCS before Andre took on the project. Thanks Andre. Really? I thought nobody is interested in my Power Grid plugins and was going to close the project... Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
Mtnbiker1998 Posted April 19, 2016 Posted April 19, 2016 Really? I thought nobody is interested in my Power Grid plugins and was going to close the project... Haven't downloaded it yet, but it looks really cool! Will be playing with it tonight. Come fly with me, lets fly, lets fly away! -Sinatra [sIGPIC][/sIGPIC] My Specs: Lenovo Y50 with GTX 860m (2GB), i7 4700HQ 2.4GHz, 8GB Ram. Corsair K70(MX Blues are awesome!), Benq GW2760HS monitor, Steelseries V3 Prism headset, TM Warthog Hotas, Sidewinder FFB2 W/ FLCS grip, CH Pro pedals, TrackIR5, KW-908 Jetseat
=Andre= Posted April 19, 2016 Posted April 19, 2016 Haven't downloaded it yet, but it looks really cool! Will be playing with it tonight. Good luck :) Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
Martini Posted December 5, 2016 Posted December 5, 2016 Is there any way I can download your configurator? I saw that you discontinued the project, I don't know why it wasn't popular.
=Andre= Posted December 6, 2016 Posted December 6, 2016 Everything in our hands. Please remind me a bit later. Pretty busy with SimShaker projects now. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
PB0_CEF Posted April 9, 2017 Posted April 9, 2017 My little M-2000C grids profiles for INS : http://www.roccat.org/fr-FR/Products/Gaming-Software/Power-Grid/Store/Grids/Games/Simulation/872/ And for Radar and ECM : http://www.roccat.org/fr-FR/Products/Gaming-Software/Power-Grid/Store/Grids/Games/Simulation/870/ And the keyboard changes needed to use it : https://www.dropbox.com/s/z80pk58dyzx5xc8/Modifs%20keyboard%20ROCCAT%20Mirage%202000C.doc?dl=0 [/url]All known Dynamic Campaign Engine Campaigns Last DCE news : Crisis in PG - Iran-Iraq War - TF-71 - TF80s - War over Beirut ...
RAZBAM_ELMO Posted April 10, 2017 Posted April 10, 2017 Does this pass integrity check on MP? Sent from my SM-G930W8 using Tapatalk Know and use all the capabilities in your airplane. If you don't, sooner or later, some guy who does use them all will kick your ass. — Dave 'Preacher' Pace, USN.
PB0_CEF Posted April 10, 2017 Posted April 10, 2017 Yes of course ! It's like having a Warthog or Thrustmaster MFDs except that you can define the buttons look and where you want to put then on your tablet ;) The most usefull grid I made for me is the NADIR panel for the Gazelle : it was nearly impossible for me to fly and to enter new waypoints at the same time :thumbup: [/url]All known Dynamic Campaign Engine Campaigns Last DCE news : Crisis in PG - Iran-Iraq War - TF-71 - TF80s - War over Beirut ...
Mr_sukebe Posted October 19, 2017 Posted October 19, 2017 Andres> Hi. Appreciate that this project has been closed from a development perspective. Is it still possible to download your grid, as created for the Huey? I'd love to give it a try and appreciate that you wouldn't be investing further time into it's refinement. 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
kaltokri Posted August 22, 2018 Posted August 22, 2018 Hi, I want to use Power Grid with DCS, but RCTRL isn't working. Andre can you please enable a download link of your project? Is there another workaround available? How did you solve the problem in your project? Regards Kal SYSTEM: Mainboard MSI MEG X570 | CPU Ryzen 7 5800X @ 4.5 GHz | RAM 64 GB @ 3200 MHz | GPU GIGABYTE RTX 4090 | 1 TB SSD | Win 10 x64 DEVICES: ASUS 27" LCD | TrackIR 5 | LukeClip | Quest 3 | PointCTRL | Virpil HOTAS | MFG Crosswind | TableMount MonsterTech MODULES: To much to list. But I stopped buying more, because of too much bugs in e.g. A-10C(II). @ED: Fix the bugs and I spend money on modules again. Promised. PROJECTS: OpenFlightSchool: DE / EN
=Andre= Posted August 23, 2018 Posted August 23, 2018 Hi Kal, Andre can you please enable a download link of your project? No, that's not easy. How did you solve the problem in your project? I converted Roccat button commands into DCS Export API control commands, avoiding keyboard input in the middle at all. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
kaltokri Posted August 24, 2018 Posted August 24, 2018 Hi Andre, thank you for your quick response. I'm willing to spend some time to get your project to work again, if you give me the code and some support. But I don't know if it is possible. Regards Kal SYSTEM: Mainboard MSI MEG X570 | CPU Ryzen 7 5800X @ 4.5 GHz | RAM 64 GB @ 3200 MHz | GPU GIGABYTE RTX 4090 | 1 TB SSD | Win 10 x64 DEVICES: ASUS 27" LCD | TrackIR 5 | LukeClip | Quest 3 | PointCTRL | Virpil HOTAS | MFG Crosswind | TableMount MonsterTech MODULES: To much to list. But I stopped buying more, because of too much bugs in e.g. A-10C(II). @ED: Fix the bugs and I spend money on modules again. Promised. PROJECTS: OpenFlightSchool: DE / EN
=Andre= Posted August 24, 2018 Posted August 24, 2018 Are you a programmer? Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
kaltokri Posted August 25, 2018 Posted August 25, 2018 I'm a system administrator. I've learned basics of c and c++ programming years ago. But in the last time I programmed only some small tools with Java, Perl and VisualBasic. I'm not sure if I'm able to make it work again. But it's a shame that Power Grid isn't fully working with DCS. Regards Kal SYSTEM: Mainboard MSI MEG X570 | CPU Ryzen 7 5800X @ 4.5 GHz | RAM 64 GB @ 3200 MHz | GPU GIGABYTE RTX 4090 | 1 TB SSD | Win 10 x64 DEVICES: ASUS 27" LCD | TrackIR 5 | LukeClip | Quest 3 | PointCTRL | Virpil HOTAS | MFG Crosswind | TableMount MonsterTech MODULES: To much to list. But I stopped buying more, because of too much bugs in e.g. A-10C(II). @ED: Fix the bugs and I spend money on modules again. Promised. PROJECTS: OpenFlightSchool: DE / EN
=Andre= Posted August 26, 2018 Posted August 26, 2018 Well, I think it worth trying. Please PM me your e-mail or Skype, let's continue with that. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
AnarchyZG Posted August 26, 2018 Posted August 26, 2018 Power Grid has so much potential, I can't imagine flying without it. I cant understand why more people do not use it. The down side is Roccat abandoned it and they did not open source it, so do not expect new features or bugfixes. It is still very usable with some limitations (RCtrl issues, some missing features like different grid sizes, horizontal orientation...). for me personaly the biggest issue is RCtrl problem which prevents mapping to default DCS commands requireing you to change some shortcuts in DCS. I made some grids for my own use, and shared them: Mirage 2000 https://www.roccat.org/en-US/Products/Gaming-Software/Power-Grid/Store/Grids/Games/Simulation/1025/ DCS FC3 general profile (for russian aircraft) https://www.roccat.org/en-US/Products/Gaming-Software/Power-Grid/Store/Grids/Games/Simulation/1000/ I was even thinking of building a clone of Power Grid myself, but do not have the time to do it on my own. [sIGPIC][/sIGPIC] MATRIC developer Check out MATRIC and forget about keyboard shortcuts
Recommended Posts