xoxen

Hi, I´m flying the Hog since 2013 and believe I´m not a beginner anymore. I´m fine in dropping JDAM´s like the GBU-38. But actually I have issues with it, as I always slightly miss the target, even though the TGP is directly pointing at it. Some friends figured out the same behavior. Even if I´m lasing the target and make it the SPI with laser on I have no success. For soft target this is not of a problem but e. g. a tank only get´s damaged. Am I missing something new? Any help is very much appreciated. Thanks, Xoxen

Hi, what about disabling Vsync. According to my knowledge it jumps from 60 to 30 if it can't reach 60. Mine is at 55-58 without Vsync, I guess would also be 30 with.

Haven't heard of hegykc since last november when the thread was closed. I wrote a PM to him and didn't get any feedback back in June I guess. I wouldn't bet he still works on it even though it would be a best selling item (especially the F/A-18 throttles) when the module is out. Xoxen

Hi all, the problem went back even thoug I haven´t installed the Creators Update. Therefore I need to recall my conclusion. Display Driver Uninstaller (DDU) did the trick by uninstalling all graphic drivers and do a fresh installation. Problem fixed. Excuse me for blaming Microsoft. Xoxen Edit: After hours I spent getting rid of this problem I did a fresh Windows install but also this failed. I guess in a new driver (Nvidia, Intel) or Windows itself something has changed causing this problem. Finally I switched off the integrated HD 4600 and bought a GTX 1030 taking over this job. It worked and now everything is great again. Two Nvidia cards seem to be more trouble free than mixing Nvidia/Intel.

:megalol::thumbup:

What material is the real A-10 grip of?

It's a rapid prototype. That's why it is of plastic and has a box around it. The die cast molds aren't finished.

Black color was fine for me so I didn´t ask for options. Here it makes sense to get in contact with the seller at the mentioned website. Regarding the color of the embroidery I guess you will have the choice. But also here red was fine for me as displayed on his website. If you are referring to custom shaped covers for your BRD products I´m really not sure if he will do so. Also here you have to request it at the seller.

Hi all, I just want to share something with you in regards to dust covering of the Hotas Warthog. Sometimes it comes into my mind to do something good for my beloved System to make shure we will have a very long relationship. I did so for my Cougar as well until I finally sold it. After greasing up the "gimbal" I thought it would be good to save the Warthog against dust as I have permanently installed it at my desk. So I searched the internet for adequate equipment and found the following: https://hotas-cover.jimdo.com/ As I have an extension of 7cm I asked for it and this was possible without raising the costs. it was 25,- EUR and 12,- EUR for the embroidery which was very cool. The "remove before flight" ribbons also can be ordered there. I already had them from ebay but this is a nice feature. Shipment costs were 8,50 EUR from France to Germany. The communication was nice and I got a high quality product. The additional item I bought a dustshield I bought here: http://www.dualsticks.com/dustshields/ This was $5,- incl. shipment and fits nicely. It is slotted to install it without unassembling the stick. Attached you find pictures (I will turn them correctly later on, I seem to have an issue with my picture program). I simply wanted to let you know and share in case somebody has the same nail in his brain like I have ;) In case of any question feel free to ask. Take care and have a great weekend. Xoxen

Hi Gothicghost, I use 3x 27" displays at my GTX1070 and my CPU integrated Intel 4600 (?!) Graphics for 2x 8" displays. One is connected via HDMI and one at DVI. I did not find any negatives and am very happy with this setup. By the way Nvidia seems to be limited to a max of 4 displays per card. I tried using all 5 at the card and failed, one stays black. I feared bad FPS because of the slow onboard graphics but this was not the fact. So at least the combination Nvidia/Intel graphics works for me. I hope this helps. Roland

Could you please add [solved] to the topic. Thanks, Xoxen

Hello, I have a strange problem and can´t get rid of it. As it is in both, 1.5 and 2.0 I believe I´m not wrong here, otherwise please shift it to where you believe it is better placed. I drive DCS at 3 27" displays at 75Hz and a resolution of 7680x1440. Additionally I have 2 small 8" displays (59Hz) for the MFCDs make a total resolution of 8960x1440. I never had issues with FPS (in Nevade between 50-70) but now I´m stuck at 25. In the menu I get 48 where I always had 180 (FPS limit). I installed the Windows 10 Creators Update as well as a new NVidia driver, so here I have major focus on to be guilty. What I did already is: - delete savegame folder - switch all DVR stuff of in the new Game Mode - checked the full screen optimization point in compatibility mode settings of the DCS.exe - installed new drivers (Intel graphics and mainboard, Nvidia) - checked the setting in Nvidia control for Vsync stuff (off, game controlled) - read nearly the entire internet for solutions - Let it run in windowed mode (1024x768) at the lowest settings with 132 FPS, but locked again. - Mirror on or off makes no difference in FPS Independend what I do there seem to be a vsync lock anywhere where I can´t find it. It works in steps and I haven´t even figured out what these steps are. I believe it is 25, 48, 64, 132 from what I´ve seen. I´m out of ideas and hopefully there are people out there with similar problems and hopefully some new ideas. Thanks and have a great night, Xoxen (Roland) EDIT: Uninstalled Windows 10 Creators Update and et voila, my FPS are back where they should be. I fear the time where I have no choice anymore to do the update. But for now I´m fine. I hope this hepls the one or the other over here. Take care, Xoxen

Just did a MP flight. The three of us all had the same issue wit the AP. Latest Patch. Edit: No issues in 1.5. Latest patch as well.

Wenn man sich deren Logo mal genau anschaut könnte man daraus eine F-16 erahnen...... Just my two cents ;) Xoxen Edit: die gezeigten Waffen passen natürlich nicht...

I had the same issue with my 3 WQHD monitors. Editing the server.lua did it for me. Attached you find my settings which is the min and max FOV angle. I also went back with the head by pausing TrackIR with F9, moving back the head with rshift+rctrl+/ (num pad) and also the arrows to get the correct position. Then I saved it with ralt + 0 (num pad). I use the slider at the Warthog throttle to zoom in and out. Attached you also find how to figure out the center view. The formula can be found on top of the picture. I used excel for it. I hope this helps. Take care, Roland P.S.: Integrity Check is OK. But there is a fisheye effect at the sides of the displays.

I would like to give my two boys (5+10) the chance to fly with daddy. They have a pc but nothing else so far. Would be great to show them how cool flight simming in Multiplayer is. Xoxen

Finally it´s time for the F-16.

Wie wir ja schon gemeinsam festgestellt haben bist du nicht alleine. Habe das identische Problem in beiden Versionen. Scheint ein Bug zu sein.

Any outcome of deleting the files? I also have issues with bad FPS. I will give this a try as well. Edit: Did it and it helped me. Figured out that an old export.lua in the scripts folder caused the problem. It was from Helios times I guess. Now I use 3 screens without it. Thanks a lot for the advice.

Hi Boarder, I think about buying the CDU and also would like to have the UFC on the same screen. If I understood it right this is in the works like displayed in the youtube video. Any idea about a release date for this? I would need it immidiately :smilewink: Take care. Roland

Gimme gimme gimme

I'm following this thread with great interest since a long time already. But to be honest I lost the overview on what is really coming and what are trials only. A list of real upcoming parts would be great. I really appreciate all of your efforts and the approach in general. I will be happy to be on the buyers list. Take care. Xoxen

I´m stupid, message deleted ;)

Hi, die freie Updatmöglichkeit endet am 29.07.16. Danach kostet es Geld. Aber ja, mit dem Win 7 Key kann man Win 10 aktivieren. Beim Update wird er gleich übernommen. Kostenlos aber nur bis zum genannten Datum. Gruß, Xoxen

Very nice time travel back into my youth. Unfortunately I was more the F-19, -16, -15, -14, -18, -22, EF 2000, AH-64 guy at that times. Now I´m a Hawg driver in the first place ;)