snowsniper

there are other thread on the forum about that. have a look on delanclip (google it or http://www.delanengineering.com/). I've got one with a second hand ps3 eye cam and opentrack and I'm really happy with it. I can't anderstand what an official "Trackir" can do better ;-)

Hi folks here is my new painting/skinning for DCS 2.0 works also in 1.5 P-51 Mustang SurvivorsP-51 Mustang Survivors : 44-63807 N20MS "Daddy's Girl" WWII Vet: assigned 8th Air Force soon in DCS user files ;-)

I would love, someone doing a tutorial "how to" and a miz file with a Drone Reaper laser and a A10C with GBU. to be ready for real 2000C ground operation missions. IRL : " To carry out the tasks entrusted to them , the Mirage 2000C fighter pilots can carry two bombs air-ground GBU- 12 laser guided or Mk 82 unguided in prone points , and they also have the ability to shot gun which unfortunately is not , for now , available on the fleet of Mirage 2000D as this are two-seaters devices." " These patrols are complementary since the 2000D can illuminate a ground target with its laser designation pod , the 2000C can't" http://www.defens-aero.com/2015/10/mirage-2000c-effectue-sa-premiere-passe-canon-dans-bande-sahelo-saharienne.html

There is no laser for gbu on 2000c only on 2000n A drone or a 2000n can do it for it.

edit : You're right. It's not working for FC3 aircraft.

:lol::lol::lol:

Hi my friend. Simply place a trigger with a condition of zone (unit or coalition in zone) or a condition of time ( time more 2 for first message, time more 25 for second message ) trigger -- condition to execute ( time more ) -- action ( message to all)

super !

I haven't seen this thread before. +1 does anyone found the spec file to correct it ?

So far what i anderstood, is that only P51 and F86 have native high gloss spec maps because the original model was imported with reflectiv materials in 3D initial modellers like 3Dsmax and so on. spec files make it visible or not. but original model must have been done like that. Result of your skin is quite good though. Enough reflectiv brilliant paint. But I've got a problem, wich anoy me : since 1.5 mi-8 glasses are like a mirror, and so far I didn't found the right spec file in world texture mi8, to correct it like normal less reflectiv glass. any ideas ?

first I had the same reaction as you. then I re read the manual. Now I can start engine, without keep this "hot start" exhaust flame. before engage starter for turbines, give just a bit rpm but not full, just enough to allow the needles to begin to move as it start, then low rpm until 40. Once Turbine is on and needle stabilize, engage slowy max rpm. no more exhaust flame

some basic kneeboard helper I did for my friends, if it can helps. engage all auto assistance once you're in hover for landing, and take off. Love the mi-8 my best loved module so far. patience IS the key, for sure. check your curvature axes too on collective & X Y. many thread about that.

no issues for me. just put your own .png files in userfiles\savedgames\***dcsalpha**\kneeboard\ you must create that directory "kneeboard" first in your saved games

"All VOR and VORTAC radio navigation beacons" still in project for NTTR. see here, but it seems not yet in alpha unfortunately http://forums.eagle.ru/showpost.php?p=2470752&postcount=2

I'm beginning to be really really fed up with reactivation issues. Mig 21bis is a piece of art, love to fly it, ... but I've just uninstall it. When leatherneck has surely definitely resolved this. I'll reinstall it. The actual clue is to have it only in 1.5 and not installed in 1.2 or 2.0. Ok I'll try that. Next Leatherneck aircraft, i'll have that in mind for sure. Don't anderstand how difficult it is to send a mail to all your customers and tell them " so far don't install it in 2.0 and not in both 1.2 or 1.5" all my modules are in 1.2.16 1.5 and 2 without any advise from LTH.

5. opentrack (free) + 3 normal white led from a bicycle lamp on a hat have worked nicely for me for more than a year, for a cheap and efficient head tracking system + a cheap second hand PS3eye cam, good so far the room was enough dark and no windows just near. I ve recently moved to delanclip, for a few penny, but it still works with my Ps3eye and opentrack software. http://www.delanengineering.com/ 4. try to grab a second hand conventional lcd TV witch can do 1920x1080, quite better and very cheaper than a 4k monitor and you'll have a 1/1 size cockpit : very immersive. I have no noticable problem of lag and response ingame, and I have to put my head vey close to see pixels. My Stick is a MS sidewinder, and I wouldn't give away for nothing. The best so far and very strongly built, unfact there s never enought buttons, I use keyboard and MODIFIERS in DCS config. "but on helos if you dont have a dedicated collective you are going to have a bad time" . the more the better but you can manage to perfom helos with MS FFB. You just have to tweak the collective curve and take care to be very sensitive with the slider. I love Helos they are my favourite modules. And I used to perform them before I bought my rudder pedals and I still have nothing more for the collective than the MS FFB. but It's a good advice to not begin with.

would be nice to have real frequencies from NDB / TACAN too. so we could use realworld Jeppesen chart for arrival and departure for nav training In Huey there's only one NDB usable so far. for departure "MESA" from NELLIS for example A nice realistic ATC, multiplayer compatible,with AI civil trafic would be much more enjoyable.

:megalol::thumbup:

Very nice to read your enthousiasm about all that stuff Thanks for the good ideas and template sharing A populated air base is a great immersion and it will be awesome with new atc in 2 more weeks ;-)

I've just seen the vid, from the gazelle, over NTTR in 29th november Wags news video Very very good job so far ! I love the high fidelity motor/rotor sounds. It looks like that everything inside is highly detailled and modeled. for sure it will be a must buy... ;-) congrat to Pat and the team

essayes ceci : dans DCSbeta\bin shift gauche click droit " ouvrir une fenetre de commande ici" DCS_updater.exe repair entrée si ça ne marche toujours pas après ça. utilise ce fichier reg zippé en pièce jointe relance le jeux et réentre la clef d'activation du F86 obtenue et je l'espere enregistrée par tes soins

same error tonight for me, since an electric fealure. unable to download the reg file, unable to lauch updater or repair same issue only DCS.exe can launch but very slow ... can't find the resolved issue on the forum .... help needed.

good news ! for first step and beta in december, until it is fully implemented in a next futur, you can use simFFB.exe ( lauch it before DCS) wich is enough good to simulate a resistance and friction on all axes on my FFB2 can be used to apply constant centering force too I use it on games like Elite dangerous, and sometimes for Heli. http://forums.eagle.ru/showpost.php?p=1394206&postcount=18

Brilliant ! This vid explain perfectly without a word why I LOVE this SIm & Community, and why nearly all my free time is now in DCS ! thanks for it, a piece of art like your screenshots :thumbup:

great new feature. Is there a way to put alternativ cockpit in the "user files", as we can do with conventional skins ? thanks for the tutorial :thumbup: