Jump to content

GPatricks

Members
 View Profile  See their activity

  • Posts

    651

  • Joined

  • Last visited

 Content Type 

Everything posted by GPatricks

  1. GPatricks
    This fix?
  2. GPatricks
    Much more up to date info on the Aero on the "Varjo Gamers Club" Discord, and an area just about DCS World.. I hope to have mine by the end of this month.
  3. GPatricks
    Have you gone on the Varjo Gamers Club Discord to look for help? There is a sub-group "flight Sims/#dcs-world" there and Varjo, while not officially, "watches" that discord.. I do believe the Varjo requires SteamVR, is this part of the issue? Seems like many have run DCS with Varjo headsets quite successfully? My biggest worry is getting VRNeckSafer to work with it when it arrives, or pray DCS or IL2 institute their own solutions for checking 6 for us without owl-necks.. I have been in contact (use the form on Varjo's site) with support and they have been extremely quick to respond, and I don't even own one yet! As for the internet connection, you have to remember they are a company that wants their equipment to always be fully updated so every headset is the same to be able to support it well. I have 0 issues with that... IIRC every time I start DCS it looks for an update, no?
  4. GPatricks
    I'm afraid your in for a bit of a shock, I don't hit 90fps with the G2 putting out "acceptable" graphics with an i9-9900k at 5gz and an RTX3090.. i'm close at 85+ with low frame times but I'll take my flat screens over it any time.. Maybe next year something will come out that can be run on a high end system that matches 2D, but it's not here yet..
  5. GPatricks
    Yes, mine is quite sturdy but I think they have changed the design since I got mine so it may be different. I velcro' d the KB on the plate normally used for the Steering wheel and repurposed a spare plate that came with it for the mouse pad.. Something to keep in mind, on my model there is limited space (width) for rudder pedals, only ones I know fit are CH and the MFG w/width adjustment add-on..
  6. GPatricks
    And so it goes... For me it's back to flatscreen and TrackIR, though I am keeping the G2 for a bit. It's substantially better than the Q2 (to me) but still not good enough. Biggest issue right now is for the G2 its one or the other as it uses one of my DisplayPorts so I can't just put it down and fly, have to disconnect it..
  7. GPatricks
    I have to use 1.75x "readers" on my flatscreens, using the G2 everything is clear, sometimes better clarity in one eye vs. the other regardless of lens setting. I'm going to make an appointment with the optometrist to see if any correction is needed (and to get the numbers VROptician needs) and at the very least get an exact pupil distance number to set.
  8. GPatricks
    Try http://www.captzeen.com/helios/index.asp
  9. GPatricks
    G2 arrived today, getting set up and just installed Windows Mixed Reality for SteamVR and I don't have a window like you show (attached) when it starts, just a regular SteamVR window. Assume this has been updated as the new Steam/Mixed came out only a few days ago. Also, what settings are you using above "OpenGL Rendering GPU" in Nvidia 3D settings? My only "complaint" so far is I had to unplug one of my monitors and do a bit of shuffling to the remaining two as the G2 requires a DisplayPort connection..
  10. GPatricks
    Appropriately called VR4DCS !
  11. GPatricks
    Thank you Speed, you came highly recommended on the DCS VR discord also!
  12. GPatricks
    Darn, we could have traded!
  13. GPatricks
    Quest 2 just got returned to Amazon, was not happy with image quality, G2 went on Sale today for €399 and will arrive Wednesday 11/24. This thread goes a ways back, is there a straight-forward guide for basic VR settings for a 3090/G2 somewhere or should I just read/study these 30 pages... ?
  14. GPatricks
    Hardware is in my sig.. Well, it's amazing what 20 hours of reading/watching/resetting/playing and then doing it over and over will get you! The image got to the point where I was *almost* happy, but nowhere near where I was with a flatscreen. Today Amazon sent me a sale notice for a G2 for almost the same price as the Q2 so back in the box it went, then back to Amazon. G2 arrives Wednesday, will spend some time with it and if not satisfied it will go back and i'll move up to the next level of +/- €1000... The Varjo Aero "looks" great, but that's €2,400 with VAT... nah.
  15. GPatricks
    New OC 2 user (arrived yesterday!) and I have been looking for help to get the clarity/sharpness I am used to with a flatscreen.. is that even possible? I have tried (following a YT video for IL2) messing with ODT and setting "Pixel per Display Override" to 2.0 (leaving the Oculus Setup set to 1.0), did not seem to make much difference. I had it set at 120hz at this point. Today going to try another suggestion of setting Oculus to 1.4 @80hz.. and try DCS for the first time in VR. I will look at Matt's thread on VR setup 1st to see what else I don't know.. Using a USB 3.1 -> USB-C cable to connect, tried a USB-C -> USB-C and (on this MB) USB-C is USB 2.0, so using the faster cable..
  16. GPatricks
    If it's the MFD extraction that you are referring to Helios's latest updates have removed the issue in the "other F16" sim. In fact it was updated to ver. 1.6.5101.0000 a day or two ago.. not sure of the implications to DCS but now Helios can be used for all extractions "over there"...
  17. GPatricks
    I've used the calibration tool several times, got the throttle to ignore the "Idle Detent" pull up/back area so the throttle starts at the normal pull back point. No issues whatsoever, but I made sure firmware and software were the latest available. I would hope TM can help you..
  18. GPatricks
    Wild guess but I think you kept it under full power the whole time and cooked the engine, doesn't take long at all. As for emergency landings, I always keep the gear up as it's hard enough to land a 109 with power, let alone in a near-stall attitude.
  19. GPatricks
    Yes to cannons/guns all at once (guns armed and cannons must be charged 1st IIRC), MW50 switch needs to be on, then it engages automatically.
  20. GPatricks
    For me, the easiest solution for the TM Warthog HOTAS in DCS was to run the Target Script that enables DX1-DX128 on the Throttle. Then I simply assign every switch position on the throttle in DCS controls setup, save the setup for each plane, and this is not effected by their countless (appreciated!) updates. TARGET is only working on the Throttle, the stick and rudders are not effected by this script and are assigned normally. This has worked flawlessly for me for quite a while now despite the many TARGET horror stories out there..
  21. GPatricks
    I would say yes to Molykote 55 since you already have it - https://www.worldofchemicals.com/chemicals/chemical-properties/molykote-55.html Nyogel 767a - https://www.worldofchemicals.com/chemicals/chemical-properties/nyogel-767a.html Notice Nyogel 767a is "Used to reduce free motion"..... not a desired result IMO. I would try this, have used it in the past on plastic to reduce friction, worked well and is relatively cheap.. https://www.amazon.es/Super-Lube-21030-Synthetic-Grease/dp/B000XBH9HI/ref=asc_df_B000XBH9HI/?tag=googshopes-21&linkCode=df0&hvadid=264677995153&hvpos=&hvnetw=g&hvrand=4253433881570110535&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1005545&hvtargid=pla-315922229188&psc=1
  22. GPatricks
    Are we still talking about the 8" Lilliput Displays\Monitors?
  23. GPatricks
    Looks very well made for Racing, the flight stick and throttle placement look a bit low and wide for my taste. I will assume the seat can be adjusted for angle and is on sliders. What is neglected is a place for a KB & Mouse, though if the Steering wheel mount is big enough you can possibly velcro the KB and add a mouse plate/pad as I did on my Next Level Racing Flight stand.. IF you look at Next Level keep in mind it isn't wide enough for most sim rudder pedals, the MFG crosswinds with width adj kit or CH Pro is about it...
  24. GPatricks
    Would be happy to, but what are DDI's?
  25. GPatricks
    The ICP was from a guy named Sebastion, i'll look for his contact info. The 8" monitors are Lilliput UM80 Touchscreens but I found the "touch" part unsatisfactory so I added the TM bezels to them using double-sided tape, work MUCH better..
×
×
  • Create New...