norbot Posted December 20, 2018 Share Posted December 20, 2018 Had the same problem as reported by Magot. After replacing the line Guns = {gun_mount("M_2_L1", { count = 0 },{muzzle_pos = {0, 0, 0}})}, with Guns = {}, as described by Automan, DCS starts normally. I also can load a mission with the MB-339. Dind't fly any mission until now, so I don't know if the guns still work, after altering the MB-339PAN.lua. A-10A, A-10C, A-10C II, AV-8B, F-5E, F-16C, F/A-18C, F-86F, Yak-52, Nevada, Persian Gulf, Syria, Supercarrier, Combined Arms, FW 190 A-8, FW 190 D-9, Spitfire LF Mk. IX, Normandy + WWII Assets Pack Link to comment Share on other sites More sharing options...
6S.Duke Posted December 20, 2018 Share Posted December 20, 2018 Had the same problem as reported by Magot. After replacing the line Guns = {gun_mount("M_2_L1", { count = 0 },{muzzle_pos = {0, 0, 0}})}, with Guns = {}, as described by Automan, DCS starts normally. I also can load a mission with the MB-339. Dind't fly any mission until now, so I don't know if the guns still work, after altering the MB-339PAN.lua.The MB339 uses the DEFA as guns, so that line were superfluous, indeed the bullets counter was declared as 0. Anyway we hope that no further problem will appears, if yes please inform us. Frecce Tricolori Virtuali - EFM coder MB339 EFM Coder Frecce Tricolori Virtuali [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Magot Posted December 20, 2018 Share Posted December 20, 2018 Hi Magot, this maybe a rapid fix for the problem: open MB-339PAN.lua with an editor like Notepad++ and replace this line Guns = {gun_mount("M_2_L1", { count = 0 },{muzzle_pos = {0, 0, 0}})}, with Guns = {}, Let me know yea, it works good, thanks :) Link to comment Share on other sites More sharing options...
Automan Posted December 20, 2018 Share Posted December 20, 2018 Ok, just in case someone is scared to use editor, below is attached the file that must be pasted (confirm overwrite:D) in MB-339PAN folder. This will fix the DCS 2.5.4 crash;)MB-339PAN.lua ACER Predator Orion 9000: W10H | Intel i9-7900X OC@4.5Ghz | 8x16GB Crucial Ballistix Sport | Sapphire GTX1080TI | Intel 900P 480GB | Intel 600P 256GB | HP EX950 1TB | Seagate Firecuda 2TB ACER Predator XB281HK: 28" TN G-SYNC 4K@60hz ThrustMaster Warthog Hotas, TPR, MFD Cougar Pack, HP Reverb Pro Link to comment Share on other sites More sharing options...
splash Posted December 20, 2018 Share Posted December 20, 2018 Great job, thanks! Link to comment Share on other sites More sharing options...
Xtan Posted December 21, 2018 Share Posted December 21, 2018 Hi Magot, this maybe a rapid fix for the problem: open MB-339PAN.lua with an editor like Notepad++ and replace this line Guns = {gun_mount("M_2_L1", { count = 0 },{muzzle_pos = {0, 0, 0}})}, with Guns = {}, Let me know Yes, it work very well. Thank you! :thumbup: Link to comment Share on other sites More sharing options...
.Tigre. Posted December 21, 2018 Share Posted December 21, 2018 Thank you! very good as always :) :thumbup: Link to comment Share on other sites More sharing options...
fl0w Posted December 21, 2018 Share Posted December 21, 2018 Hi, I have attempted to taxi on the ground and I seemed to have an error with moving the rudder. It moves but in very small range. Is there any way to fix this/did I forget something? Thanks! Link to comment Share on other sites More sharing options...
pumkins Posted December 21, 2018 Share Posted December 21, 2018 I need help with dcs-bios + MB 339 I could make the led work ok mb339pam DcsBios::LED vor(0x8200, 0x0004, PIN); DcsBios::LED tacan(0x8200, 0x0002, PIN); DcsBios::LED rnav(0x8200, 0x0008, PIN); DcsBios :: LED fltDirAlt (0x8200, 0x0040, PIN); DcsBios :: LED fltDirGs (0x8200, 0x0020, PIN); DcsBios :: LED fltDirRadioNav (0x8200, 0x0010, PIN); what does not work for me are the swich MASTER ARMAMENT Switch DcsBios :: Switch2Pos masterArm ("MASTER_ARM", PIN); WARN TEST Button DcsBios :: Switch2Pos warnLtTestButton ("WARN_LT_TEST_Button", PIN); can help solve swich Link to comment Share on other sites More sharing options...
PONY3_Aracno Posted December 22, 2018 Share Posted December 22, 2018 (edited) It could be related to the export lua but its not easy to solve. We are currently working hard on the efm and we will get rid of the export lua with the next update of the mod I'm sorry but we are a small group and we cannot work on too much things at the same time, and now we are focused on the developement Edited December 22, 2018 by PONY3_Aracno [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
dSAF Dancer Posted December 22, 2018 Share Posted December 22, 2018 we will get rid of the export lua with the next update of the mod This would be a huge relief, but take your time and keep your quality up instead of a rushed release, because your work is amazing. Louis|Dancer, foundation member of the digital Swiss Air Force, a group of enthusiasts trying to imitate everything that has to do with Swiss military aviation on dcs. If you want to join us, contact us via instagram. our youtube chanel:dSAF our instagram:dSAF my rusty pc: msi gtx1080ti / ryzen 5 2600x / ga-ab350 gaming motherboard / 16gb ram / rift cv1 / warthog Link to comment Share on other sites More sharing options...
flyingscotsman Posted December 22, 2018 Share Posted December 22, 2018 Have upgraded to 2.5.4 beta and had to remove the mb339 to get sim back working. I deleted the aircraft from the c:\saved games\dcs open Betaz\Mods\Aircraft. Put the mods back in blocks and kept restarting to confirm working. The mb339 was the only mod I had to leave behind. Any suggestions. No rush Link to comment Share on other sites More sharing options...
PONY3_Aracno Posted December 22, 2018 Share Posted December 22, 2018 Have upgraded to 2.5.4 beta and had to remove the mb339 to get sim back working. I deleted the aircraft from the c:\saved games\dcs open Betaz\Mods\Aircraft. Put the mods back in blocks and kept restarting to confirm working. The mb339 was the only mod I had to leave behind. Any suggestions. No rush here is the fix: https://forums.eagle.ru/attachment.php?attachmentid=200188&d=1545340577 Ok, just in case someone is scared to use editor, below is attached the file that must be pasted (confirm overwrite:D) in MB-339PAN folder. This will fix the DCS 2.5.4 crash;) https://forums.eagle.ru/attachment.php?attachmentid=200188&d=1545340577 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
flyingscotsman Posted December 23, 2018 Share Posted December 23, 2018 Hi Pony3_Aracno, Thanks for that Link to comment Share on other sites More sharing options...
thrustvector Posted December 23, 2018 Share Posted December 23, 2018 guys, not sure what I'm doing wrong, put it on the runway hot start so its not procedure, tootle off down the line, as soon as I rotate it explodes? AI do it fine....dam bots Link to comment Share on other sites More sharing options...
6S.Duke Posted December 23, 2018 Share Posted December 23, 2018 guys, not sure what I'm doing wrong, put it on the runway hot start so its not procedure, tootle off down the line, as soon as I rotate it explodes? AI do it fine....dam botsDo your rotation at about 140-150 kts... this is due to your tail cone hit the ground during the rotation and since the aircraft hasn't a damage model yet, the only way that it has to react is the explosion. Do the same during landing...maintaing your vertical speed low and your IAS around 130 kts (on this last data I don't remember well, but do your test) Frecce Tricolori Virtuali - EFM coder MB339 EFM Coder Frecce Tricolori Virtuali [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
thrustvector Posted December 23, 2018 Share Posted December 23, 2018 excellent, thanks Duke :) Link to comment Share on other sites More sharing options...
flyingscotsman Posted December 24, 2018 Share Posted December 24, 2018 Got may mb339 workng in 2.5.4 thanks for the help Link to comment Share on other sites More sharing options...
6S.Duke Posted December 24, 2018 Share Posted December 24, 2018 You are welcome! We wish you a Merry Christmas! Frecce Tricolori Virtuali - EFM coder MB339 EFM Coder Frecce Tricolori Virtuali [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
6S.Duke Posted December 27, 2018 Share Posted December 27, 2018 (edited) Frecce Tricolori Virtuali - EFM coder Edited December 29, 2018 by 6S.Duke MB339 EFM Coder Frecce Tricolori Virtuali [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
.Tigre. Posted December 28, 2018 Share Posted December 28, 2018 Simply spectacular, very good as always :) :thumbup: Link to comment Share on other sites More sharing options...
fl0w Posted December 29, 2018 Share Posted December 29, 2018 Awesome stuff! For future reference, it is easier for us to see it by using the YOUTUBE tag. Just use like so. Looking forward to this EFM release! [YOU TUBE]video id[/YOU TUBE] get rid of spaces for it to work Link to comment Share on other sites More sharing options...
aaron886 Posted December 29, 2018 Share Posted December 29, 2018 Duke, nice work! Looking good. If you don’t mind me saying, it looks like you’re dealing with reversed yaw-roll coupling, where of course a straight-winged jet will normally exhibit roll in the direction of yaw rate. In your videos it appears to want to do the opposite, especially apparent in spins. I’m trying to imagine why this would happen, but without looking at your code I can’t come up with anything. Have you noticed that and are you still working on it? Link to comment Share on other sites More sharing options...
6S.Duke Posted December 29, 2018 Share Posted December 29, 2018 Duke, nice work! Looking good. If you don’t mind me saying, it looks like you’re dealing with reversed yaw-roll coupling, where of course a straight-winged jet will normally exhibit roll in the direction of yaw rate. In your videos it appears to want to do the opposite, especially apparent in spins. I’m trying to imagine why this would happen, but without looking at your code I can’t come up with anything. Have you noticed that and are you still working on it?Every advice is well accepted ;) Yes, in the spin phase I did an error, I continued to perform the menouvre with opposite rudder while I should have to perform the classical spin. Frecce Tricolori Virtuali - EFM coder MB339 EFM Coder Frecce Tricolori Virtuali [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
6S.Duke Posted December 29, 2018 Share Posted December 29, 2018 Awesome stuff! For future reference, it is easier for us to see it by using the YOUTUBE tag. Just use like so. Looking forward to this EFM release! [YOU TUBE]video id[/YOU TUBE] get rid of spaces for it to work Yeah, sorry but using tapatalk I thought that the youtube tag was automatic. Next time I will place it manually ;) Frecce Tricolori Virtuali - EFM coder MB339 EFM Coder Frecce Tricolori Virtuali [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Recommended Posts