Baldawg Posted January 24, 2019 Share Posted January 24, 2019 I've never had any issues with SRS but since yesterday when others are talking to me their voice starts low and increases in volume until it is so loud its distorted. Any thoughts on this? cheers Ive had this too. What is your speaker boost set to. I had mine all the way up. I set mine to 16 and that seems to have fixed it. It seemed to only happen with two radios in receiving at once though. Win 10 Pro - Intel I7 12700k@4.9ghz water cooled - ASUS TUF Z690 -EVGA RTX 3080 12G Hybrid - EVGA 1000W PSU - 32GB 3200 G-Skill XMP- Reverb G2 -Custom mip and side panels - Leo Bodnar BBI32x2, BBI64x4 - TM Warthog HOTAS - TM Cougar MFD's x 3 - TM TPR pedals Link to comment Share on other sites More sharing options...
Markeebo Posted January 26, 2019 Share Posted January 26, 2019 (edited) Ok gents. I've got an issue that's had me baffled. Hope someone can provide some feedback. I've been using SRS fro a very long time, but had never tackled presets until recently. Issue 1. A10C. VHF AM. I set dial to "Pre" with radio on, and SRS never shows in the overlay the "C". So essentially, the mode switch isnt actually working.(Might not be and SRS issue, but thought I would drop it here to see if someone else is getting it.) Issue 2. I have opened the .TXT files for both the VHF AM and UHF radios for the A10C in SRS and edited them. Issue 1 above prevents me from testing VHF AM, however, the UHF radio actually SHOWS that I am on "Preset", but it doesn't read the .txt file within SRS for the UHF. So its still reading the internal freqs set God knows where in DCS. So how do I get DCS/SRS to make nice and actually read the .txt files for channels in the SRS folder? Issue 3. Which is more like a clue I'm tossing out in hopes that it leads to a resolution. When I open the overlay on the desktop as opposed to the Shift+ctrl+ESC, I can select to CH tab of each radio, but the dropdown doesn't work and the RELOAD button is grayed out. If I've miss something in the forums, I humbly apologize for the repeat, but I've scoured the thread pretty heavily before posting. I am hoping that its something REAL dumb and simple that I am missing. Markeebo Found my answer. Edited January 27, 2019 by Markeebo Link to comment Share on other sites More sharing options...
Emmy Posted January 29, 2019 Share Posted January 29, 2019 Ok gents. I've got an issue that's had me baffled. Hope someone can provide some feedback. I've been using SRS fro a very long time, but had never tackled presets until recently. Issue 1. A10C. VHF AM. I set dial to "Pre" with radio on, and SRS never shows in the overlay the "C". So essentially, the mode switch isnt actually working.(Might not be and SRS issue, but thought I would drop it here to see if someone else is getting it.) Issue 2. I have opened the .TXT files for both the VHF AM and UHF radios for the A10C in SRS and edited them. Issue 1 above prevents me from testing VHF AM, however, the UHF radio actually SHOWS that I am on "Preset", but it doesn't read the .txt file within SRS for the UHF. So its still reading the internal freqs set God knows where in DCS. So how do I get DCS/SRS to make nice and actually read the .txt files for channels in the SRS folder? Issue 3. Which is more like a clue I'm tossing out in hopes that it leads to a resolution. When I open the overlay on the desktop as opposed to the Shift+ctrl+ESC, I can select to CH tab of each radio, but the dropdown doesn't work and the RELOAD button is grayed out. If I've miss something in the forums, I humbly apologize for the repeat, but I've scoured the thread pretty heavily before posting. I am hoping that its something REAL dumb and simple that I am missing. Markeebo Found my answer. Um, care to share? [sIGPIC][/sIGPIC] http://www.476vfightergroup.com/content.php High Quality Aviation Photography For Personal Enjoyment And Editorial Use. www.crosswindimages.com Link to comment Share on other sites More sharing options...
overlord Posted February 5, 2019 Share Posted February 5, 2019 Hi all! I have a problem, every time I run the simple radio I get this message every time I run it: "The SRS client windows is no longer visible likely to a monitor reconfiguration" IT seems that works but the reality is that I try to connect as a client and it is impossible for me, never connect. The only way to fix it that I have found is to reinstall SRS every time that I want to use it. There is some way to repair this inconvenience. Greetings and thank you. >> Blog Tanques y Blindados: Historia del carro de combate. >> DCS Overlord Briefings >> Youtube Channel Link to comment Share on other sites More sharing options...
Auntystatic Posted February 7, 2019 Share Posted February 7, 2019 crash just after startup running the server the normal window pops up then goes of after about 3 seconds, same occurs with the client, I've tried reinstalling both 1.5.8 and rolling back to 1.5.7 but both do the same now, no new software was put on the pc, logs attached http://auntystatic.uk/dcsworld/serverlog.txt http://auntystatic.uk/dcsworld/clientlog.txt Any help would be grateful Also would it be possible to have an option to set a single global frequency option that both red and blue could hear, a guard frequency as such if you will, just we did an op recently where we had to escort red fighters out of controlled air space but we could not contact them as we had coalition radios set, so a single guard frequency option would be a great addition Thanks for providing the community with some very software Auntystatic Link to comment Share on other sites More sharing options...
ersx Posted February 9, 2019 Share Posted February 9, 2019 Hello! I need help! How to close this windows in DCS app: Link to comment Share on other sites More sharing options...
Ciribob Posted February 9, 2019 Author Share Posted February 9, 2019 Hello! I need help! How to close this windows in DCS app:Cntrl + left shift + ESC - see installation page or the first post of this thread Sent from my ONEPLUS A3003 using Tapatalk Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
ersx Posted February 9, 2019 Share Posted February 9, 2019 Cntrl + left shift + ESC - see installation page or the first post of this thread Sent from my ONEPLUS A3003 using Tapatalk Thank you!!!:thumbup: Link to comment Share on other sites More sharing options...
Casimir06 Posted February 11, 2019 Share Posted February 11, 2019 (edited) I'm having a weird situation with version 1.5.8.0 where even when I'm not running SRS at all I'm still seeing the DCS-SRS Client in-game window. It will show the familiar: No Radio Connected Connect to SRS Server and start or join a mission I've checked Task Manager and DCS-ClientRadio.exe isn't running, and checking all through the running programs doesn't show anything that looks like any SRS related driver or program. Is this normal, or is this some kind of setting somewhere? EDIT: As with Ciribob above, I can close the window with the Cntrl + left shift + ESC keys... but my question is why it still appears at all if I'm not running SRS. Edited February 11, 2019 by Casimir06 Link to comment Share on other sites More sharing options...
ricktoberfest Posted February 11, 2019 Share Posted February 11, 2019 Any reason why my mic output options are always overwritten back to nothing each time I close the client? Input seems to stay ok and all my other settings save, even when I manually changed the config file it erased it after closing the client Link to comment Share on other sites More sharing options...
Ciribob Posted February 11, 2019 Author Share Posted February 11, 2019 I'm having a weird situation with version 1.5.8.0 where even when I'm not running SRS at all I'm still seeing the DCS-SRS Client in-game window. It will show the familiar: No Radio Connected Connect to SRS Server and start or join a mission I've checked Task Manager and DCS-ClientRadio.exe isn't running, and checking all through the running programs doesn't show anything that looks like any SRS related driver or program. Is this normal, or is this some kind of setting somewhere? EDIT: As with Ciribob above, I can close the window with the Cntrl + left shift + ESC keys... but my question is why it still appears at all if I'm not running SRS.That window is native to DCS - it's drawn regardless of SRS running as it doesn't know if SRS is runningAny reason why my mic output options are always overwritten back to nothing each time I close the client? Input seems to stay ok and all my other settings save, even when I manually changed the config file it erased it after closing the clientTry launching SRS directly without a shortcut from where you installed it. Maybe working directory issue? Sent from my ONEPLUS A3003 using Tapatalk Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
Casimir06 Posted February 11, 2019 Share Posted February 11, 2019 That window is native to DCS - it's drawn regardless of SRS running as it doesn't know if SRS is running Ahh. I did not know that. I'd never seen it before using SRS so that was the logical conclusion barring any other info. Thank you. Link to comment Share on other sites More sharing options...
DERacing Posted February 11, 2019 Share Posted February 11, 2019 One of the things I noticed since the last update is that I am not getting the Tx and Rx click sounds now. I am going to try and uninstall and reinstall to see if that corrects the issue. Not sure why that had broken though. Intel i7 9700k, 64GB DDR4 (Corsair), Gigabyte Z390 Master, RTX 2080 Ti AMP 11gb, 500GB Sabrent Rocket (System), 1TB XPG Gammix S11 Pro M.2 (DCS), Windows 11 64-bit Pro, Samsung 49" 4K CRG9 Monitor (5120x1440), Samsung Odyssey Plus, TrackIR 5, Thrustmaster Warthog Hotas, Various streamdecks, button boxes, Logitech Pro Rudder Pedals, Corsair K95 Platinum, Iron Claw mouse. DCS OB, F-14B Tomcat, F-18C Hornet, F-16C Viper, A-10C Warthog, F-5 Tiger II, AV-8B Harrier, P-51D Mustang, FC3, Super Carrier Thrustmaster Warthog Hotas, (3) Cougar MFD's, Logitech Pro Rudder Pedals, (2) Stream Decks, (1) Stream Deck XL, (1) Stream Deck Mini, Misc Button Boxes Link to comment Share on other sites More sharing options...
hancerPL Posted February 11, 2019 Share Posted February 11, 2019 Hello It would be very useful for me to "delay time while slowing down" Specialization A-10C https://vbw304.pl/ Link to comment Share on other sites More sharing options...
Ornithopter Posted February 15, 2019 Share Posted February 15, 2019 I've just recently set up SRS, and the only thing that I cannot get working are the presets. I've put a text file in the Simple Radio root directory (in this case, called 'r828.txt' and filled it with a couple of frequencies for use with the Su-25. I've tried other radios, on other airplanes as well. However, I've not been able to get SRS to read these files to populate the presets. What could I be doing wrong? Link to comment Share on other sites More sharing options...
InteR Posted February 21, 2019 Share Posted February 21, 2019 Hi! How do I do to disable the floating window, inside DCS World that advice us we are not running DCS simple radio? I think it is very annoying. Thanks! DCS Wishlist: DCS: A-10C 2: new suite, flight and system improvements. fix no real things. To include new features. Some real love. Link to comment Share on other sites More sharing options...
Ciribob Posted February 21, 2019 Author Share Posted February 21, 2019 Hi! How do I do to disable the floating window, inside DCS World that advice us we are not running DCS simple radio? I think it is very annoying. Thanks!See https://github.com/ciribob/DCS-SimpleRadioStandalone/releases/latest - VR overlay or the first page of this thread Sent from my ONEPLUS A3003 using Tapatalk Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
gonk Posted February 22, 2019 Share Posted February 22, 2019 Hi! How do I do to disable the floating window, inside DCS World that advice us we are not running DCS simple radio? I think it is very annoying. Thanks! Left Control + Left Shift + Escape Intel Intel Core i7-8086K 32 Gig RAM 1 Tb Nvme SSD EVGA 1080Ti Win 10 64 Pro LG 34UM95 34 inch Monitor Track IR 5 Oculus Rift HOTAS Warthog...mod'd TDC SIMPEDS Pedals Link to comment Share on other sites More sharing options...
gonk Posted February 22, 2019 Share Posted February 22, 2019 Can this program be modified to just work as a standalone on other games ? I.E. BOS/CLOD/Arma... etc. Like TACVIEW which is compatible with multiple sims.. Even it it was an overlay with no terrain masking. Great work... :thumbup: Intel Intel Core i7-8086K 32 Gig RAM 1 Tb Nvme SSD EVGA 1080Ti Win 10 64 Pro LG 34UM95 34 inch Monitor Track IR 5 Oculus Rift HOTAS Warthog...mod'd TDC SIMPEDS Pedals Link to comment Share on other sites More sharing options...
Yurgon Posted February 22, 2019 Share Posted February 22, 2019 Wishlist item: Would it be possible to set the Radio N Audio Channel (Both/Right/Left) depending on aircraft? In the A-10C, I prefer to have Radio 1 set to Both and Radios 2 and 3 to Right and Left, respectively. But in the F/A-18C, I'd actually prefer Radio 1 Left and Radio 2 Both, and it would be a bit cumbersome to change these settings prior to each flight. Link to comment Share on other sites More sharing options...
Gliptal Posted February 22, 2019 Share Posted February 22, 2019 Setup the settings as you want them for each aircraft, and rename the client.cfg appropriately. Then use the "-cfg=" flag to load the appropriate one. Link to comment Share on other sites More sharing options...
Yurgon Posted February 22, 2019 Share Posted February 22, 2019 Setup the settings as you want them for each aircraft, and rename the client.cfg appropriately. Then use the "-cfg=" flag to load the appropriate one. Awesome, works like a charm, thanks a lot! :thumbup: Link to comment Share on other sites More sharing options...
SolUniverse Posted February 25, 2019 Share Posted February 25, 2019 Great app! seems if i set the radio below 118.00 it wont show up on overlay. seems to still work tho. Link to comment Share on other sites More sharing options...
Captain Orso Posted February 25, 2019 Share Posted February 25, 2019 I've searched this thread, but I cannot find a reference to my issue, and I find it unlikely that I would be the very first to have this issue, so... I have a Thrust Master Warthog throttle. I want to use button 15 (left throttle lever, red button at the front) with a modifier (TM HOTAS Joystick paddel) to toggle the Overlay on and off. The button number is what appears in the Windows 10 Test tab: Settings -> Devices -> [Related Devices] Devices and Printers -> Throttle - HOTAS Warthog <Right-Click> -> Game Controller Settings -> [installed game controllers] Throttle - HOTAS Warthog -> Properties -> Test tab. When I press the red button, the 15 lights up on the Test window. When I use the same button in SRS Controls -> [Overlay Toggle] -> Set it records [button] 14, not 15. I use the TM HOTAS Stick Paddel as a modifier, which is 4 in the Windows test, but 3 in SRS. So both are offset by 1, which to me is basically no big deal. But when using them, I cannot toggle the Overlay on and off. Any tips? When you hit the wrong button on take-off System Specs. Spoiler System board: MSI X670E ACE Memory: 64GB DDR5-6000 G.Skill Ripjaw System disk: Crucial P5 M.2 2TB CPU: AMD Ryzen 7 7800X3D PSU: Corsair HX1200 PSU Monitor: ASUS MG279Q, 27" CPU cooling: Noctua NH-D15S Graphics card: MSI RTX 3090Ti SuprimX VR: Oculus Rift CV1 Link to comment Share on other sites More sharing options...
Gizzy Posted February 26, 2019 Share Posted February 26, 2019 There are 2 overlays... (1) the overlay toggled via the hotkeys defined within the SR Control Panel - This can be dragged and re-sized etc... the original overlay.... this should (it does with me) work just fine with your TMWH red button and MODIFIER. If not the problem is probably local. (2) a non scalable overlay primarily but not exclusively used in VR. It has several 'states'. By default this overlay and 'state' is toggled on and off via LCTRL+LSHT+ESC. It will only appear if DCS is running. This toggle combination is defined in C:\Users\Gizzy\Saved Games\DCS.openbeta\Config\SRSConfig.lua currently line 5. ["hotkey"] = "Ctrl+Shift+escape"You may change this combination but as I understand it inly keyboard characters may be used. You could get round this with a mapper if you really wanted.... Hope this helps... Link to comment Share on other sites More sharing options...
Recommended Posts