Scoll Posted July 16, 2016 Posted July 16, 2016 Hi all, Since last update i get randomly on upper right corner playing on Multiplayers Servers (all i tested): Input device TrackIr unplugged ...lag... then : Input device TrackIr plugged Only on 1.5 not on 2, well i'm not using TrackIR but FreeTrack with Headtracker, no TrackIR on devices list. [sIGPIC][/sIGPIC]
Devrim Posted July 17, 2016 Posted July 17, 2016 I saw that too. I use OpenTrack. Intel i7-14700@5.6GHz | MSI RTX4080 SuperSuprimX | Corsair V. 64GB@6400MHz. | Samsung 1TB 990 PRO SSD (Win10Homex64) Samsung G5 32" + Samsung 18" + 2x8"TFT Displays | TM Warthog Stick w/AVA Base | VPC MongoosT-50CM3 Throttle | TM MFD Cougars | Logitech G13, G230, G510, PZ55 & Farming Sim Panel | TIR5 & M.Quest3 VR >>MY MODS<< | Discord: Devrim#1068
Slazi Posted July 18, 2016 Posted July 18, 2016 Your device is unsupported, so you'll need to hope for community support.
QuiGon Posted July 18, 2016 Posted July 18, 2016 I have the same problem, but with TrackIR. It randomly gets "unplugged" since the latest update, but not "plugged" again, so I have to restart DCS. It's really annoying. It usally happens when I put it to standby, but just sometimes. Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit DCS Panavia Tornado (IDS) really needs to be a thing!
Scoll Posted July 18, 2016 Author Posted July 18, 2016 Your device is unsupported, so you'll need to hope for community support. Thank you very much for your help Slazi, i always appreciate someone takes time helping eachother, nevertheless, don't say anything you might regret :smilewink: My device is well supported as it is a Logitec Camera. This random behavior, in fact : Laaaaag, (freeze about 5 seconds) then : Input device TrackIr unplugged then after some seconds: Input device TrackIr plugged apears just after last update 1.5.4.54855.129, Someone knowing something about that is welcome. [sIGPIC][/sIGPIC]
SkateZilla Posted July 18, 2016 Posted July 18, 2016 Thank you very much for your help Slazi, i always appreciate someone takes time helping eachother, nevertheless, don't say anything you might regret :smilewink: My device is well supported as it is a Logitec Camera. This random behavior, in fact : Laaaaag, (freeze about 5 seconds) then : Input device TrackIr unplugged then after some seconds: Input device TrackIr plugged apears just after last update 1.5.4.54855.129, Someone knowing something about that is welcome. What he means to say, is the tracking interface you are using is unsupported by Eagle Dynamics. ED Does not support FreeTrack/OpenTrack/FaceTrackNoIR etc. However, this issue appears to be a global USB device issue that we are looking into. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
Scoll Posted July 19, 2016 Author Posted July 19, 2016 ED Does not support FreeTrack/OpenTrack/FaceTrackNoIR etc. Always sade to hear that, but that's not the subject, isn't it ? However, this issue appears to be a global USB device issue that we are looking into. Ok, i feel you are in the good direction, Thank you SkateZilla and ED. [sIGPIC][/sIGPIC]
charlesnett Posted July 19, 2016 Posted July 19, 2016 if you are using facetracknoir it can use trackir drivers. you just have to set it to only use that driver in the settings rather than freetrack and maybe see if that fixes the issue. i use this and will report back if i have any problems after setting it to use trackir drivers only. hope this helps Charlesnett Callsign - "Fisherman"
QuiGon Posted July 20, 2016 Posted July 20, 2016 I have this same problem with TrackIR Pro Thank god, I'm not the only one! Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit DCS Panavia Tornado (IDS) really needs to be a thing!
Cool-Hand Posted July 22, 2016 Posted July 22, 2016 I use TrackIR as well and get this error as well. A couple of times I end up having to restart the game to get TrackIR to work again even though when I Alt+Tab out TrackIR is working fine. [sIGPIC][/sIGPIC]
dresoccer4 Posted July 27, 2016 Posted July 27, 2016 hi all. i have a similar problem, but didn't want to start a new thread. whenever i alt-tab out and back in, or even if i just alt+enter, i keep getting "input device trackIR plugged/unplugged" however i am not using any tracking software/hardware. but they key issue for me here is, my force feedback completely goes out, and it won't come back unless i restart. i play with MSFT ForceFeedback 2 and rely on the ff for errything, so basically makes the game unplayable for me :( just wanted to give a heads up. strange times indeed.... Acer Predator Triton 700 || i7-7700HQ || 512GB SSD || 32GB RAM || GTX1080 Max-Q || FFB II and Thrustmaster TWCS Throttle || All DCS Modules
El Hadji Posted July 29, 2016 Posted July 29, 2016 I get the message with TiR 5/ProClip (latest TiR version) but it never stops working (I have reverted back to the old 1.5.3 functionality though since I am not a fan of the "updated" TiR functionality). If I happen to place my hand between the sensor and the LED's for a split second I also get the message but for the most part it pops up randomly. [sIGPIC][/sIGPIC] My computer specs below: CPU: Intel Core i5 3570K@4.2GHz | CPU Cooler: Corsair Hydro H100 | GPU: MSI Nvidia GTX 680 2GB Lightning 2GB VRAM @1.3GHz | RAM: 16GB Corsair Vengeance LP DDR3 1600 | SSD 1: Corsair Force 3 120GB (SATA 6) | SSD 2: Samsung 850 EVO 500GB (SATA 6) | Hybrid disc: Seagate Momentus Hybrid 500/4GB (SATA 3) | Keyboard: QPAD MK-85 | Mouse: QPAD 5K LE | TrackIR 5 + Track Clip Pro | Thrustmaster HOTAS Warthog | MFG Crosswind | OS: Win7/64
SkateZilla Posted August 2, 2016 Posted August 2, 2016 (edited) The Message will appear when Tracking INput from the TrackIR Interface receives no data. This can Happen When: -TrackIR Software is Paused or Stopped/Closed. -IR Pollution Causing Tracking Disruption (IR Light Sources Causing Distortions making points indistinguishable) -Object Obstruction Causing Tracking Disruption (ie Hand over LED/Reflector, Out of camera range/focus etc). -When USB Device is Removed then Re-Initialized within DCS (A separate issue by itself, but can trigger the aforementioned trackIR unplugged/plugged message). Edited August 2, 2016 by SkateZilla Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
Aginor Posted August 2, 2016 Posted August 2, 2016 For me it happened at least once that it stopped working when just loading another mission. I had to exit DCSW completely to get it working again. Not that severe in this case, just noticed. DCSW weapons cheat sheet speed cheat sheet
SkateZilla Posted August 2, 2016 Posted August 2, 2016 For me it happened at least once that it stopped working when just loading another mission. I had to exit DCSW completely to get it working again. Not that severe in this case, just noticed. DCS Version Number? First Mission Aircraft? Second Mission Aircraft? Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
Aginor Posted August 2, 2016 Posted August 2, 2016 It was in the 1.5.4 release version. The first plane I am not 100% sure anymore, I think it was the A-10C. It was still working there. The second plane (when it didn't work anymore) was the M2000C. And I _may_ have alt-tabbed out of DCSW between the missions, if that helps finding the issue. :) DCSW weapons cheat sheet speed cheat sheet
SkateZilla Posted August 4, 2016 Posted August 4, 2016 (edited) It was in the 1.5.4 release version. The first plane I am not 100% sure anymore, I think it was the A-10C. It was still working there. The second plane (when it didn't work anymore) was the M2000C. And I _may_ have alt-tabbed out of DCSW between the missions, if that helps finding the issue. :) Delete /Headtracker/ and /TrackIR/ Folders from: /DCS World/Mods/Aircraft/<module>/Input/<aircraft>/ These are Redundant/Obsolete, and causing DCS to Switch between New and Old Interface, is what's causing TrackIR to Dump on you after the 1st Mission Aircraft that still have these folders are: Hawk C-101 M-2000C MiG-21Bis SA-342 Likely they will be removed in the coming updates, as it was reported internally already. Edited August 4, 2016 by SkateZilla Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
Aginor Posted August 5, 2016 Posted August 5, 2016 Roger, thx. DCSW weapons cheat sheet speed cheat sheet
Pizzicato Posted August 20, 2016 Posted August 20, 2016 Delete /Headtracker/ and /TrackIR/ Folders from: /DCS World/Mods/Aircraft/<module>/Input/<aircraft>/ These are Redundant/Obsolete, and causing DCS to Switch between New and Old Interface, is what's causing TrackIR to Dump on you after the 1st Mission Aircraft that still have these folders are: Hawk C-101 M-2000C MiG-21Bis SA-342 Likely they will be removed in the coming updates, as it was reported internally already. Thanks Skate. Unfortunately, I'm having the same issue with random-but-permanent "Track IR Device Has Been Unplugged" messages with the L-39C, L-39ZA and Mig-15. I've been getting it for several weeks now with all of the latest 1.5.4 updates. It's happened in Instant Missions, self-made missions and, most recently, the Museum Relic campaign. I'm using a TrackIR 5 with the Pro clip, and there's definitely no obstructions or other IR sources/interference in the space. I can't find a consistent, repeatable use case for the "unplugging", but it's definitely infuriating - especially when it happens right in of a really long mission before you've even reached the combat area (Mission 8 of Museum Relic - I'm looking at you). i7-7700K @ 4.9Ghz | 16Gb DDR4 @ 3200Mhz | MSI Z270 Gaming M7 | MSI GeForce GTX 1080ti Gaming X | Win 10 Home | Thrustmaster Warthog | MFG Crosswind pedals | Oculus Rift S
uri_ba Posted August 20, 2016 Posted August 20, 2016 Happens to me too with TIR4. Creator of Hound ELINT script My pit building blog Few DIY projects on Github: DIY Cougar throttle Standalone USB controller | DIY FCC3 Standalone USB Controller
flyco Posted August 21, 2016 Posted August 21, 2016 I suspect this is linked to the re-initialising of other USB devices, such as bespoke switches, which first manifested itself after the same update as spawned the TrackIR unplugged/plugged outbreak.
Skulleader Posted September 6, 2016 Posted September 6, 2016 Hello guys, Me too I have the same problem with my TrackIR, this night I've meet this problem many time during the same fly with Gazelle and F-5, always the same message: TrackIR unplugged/plugged. My DCS is 1.5.4.55952 Stable version and I use the last drivers and software from Natural Point. My Windows 8.1 When my TrackIR is unplugged I use ALT+TAB and the TrackIR work fine again but it's not really one solution. I would like to know if I must unstall all my DCS and after that reinstall DCS for fix this problem because it's really a nightmare... In advance a great thanks Skull. [sIGPIC]http://forums.eagle.ru/signaturepics/sigpic93192_6.gif[/sIGPIC] My Facebook: https://www.facebook.com/profile.php?id=100006748814655 My P-51D's Mod: http://forums.eagle.ru/showthread.php?t=142739 One of my few skins : https://www.digitalcombatsimulator.com/en/files/1452845/
Recommended Posts