[Official] SimShaker for Aviators

[Indyplumber]

I'm still trying to get this to work.  I have the NLR HF8 pad.  I can see it in simshaker and testing and massage all work but when I get into DCS either the bf109 or a-10 i get no feedback.

there must be a step i'm missing

 

nullnull

[Mordants]

On 4/26/2024 at 4:23 PM, FZG_Immel said:

anyone selling a Gametrix controller ? mine seem to be faulty, and 2 right leg motors arent working anymore. It also makes bad short circuit odor.

 

Anyone know if the controller itself can be bought outside of Andre (who unfortunately cannot sell them anymore to my country)

If it's this you are looking for, then I have it along with the inner bits. My jetpad stopped working and I dn't know why,but you are welcome to it. I'm in the UK.

[Indyplumber]

got it working...  read thru a lot of pages here and discovered I needed to uninstall the next level racing software

[FZG_Immel]

On 4/29/2024 at 11:01 PM, Mordants said:

If it's this you are looking for, then I have it along with the inner bits. My jetpad stopped working and I dn't know why,but you are welcome to it. I'm in the UK.

that would be great! how much do you want for it ? do you have paypal ?

 

thanks for the offer!

[jasonstory44]

Hey guys…is there a way to get the paid version of SSA to work with mods?  More specifically trying to get it to work with the F-18E Superhornet mod.  It works fine when I’m in the official Charlie jet but I get nothing with the modded jet. Even when I switch to generic jet.  Thanks in advance, Jason

[=Andre=]

13 hours ago, jasonstory44 said:

Hey guys…is there a way to get the paid version of SSA to work with mods?  More specifically trying to get it to work with the F-18E Superhornet mod.  It works fine when I’m in the official Charlie jet but I get nothing with the modded jet. Even when I switch to generic jet.  Thanks in advance, Jason

Hey,
shouldn't be hard to get it working with this little tool https://simshaker.com/attachments/get/11/simshaker_mods_support_gear_v.0.0.zip

[dsc106]

10 hours ago, =Andre= said:

Hey,
shouldn't be hard to get it working with this little tool https://simshaker.com/attachments/get/11/simshaker_mods_support_gear_v.0.0.zip

Andre, this is cool! Thanks! I have an additional question for you. I just came here trying to find a way to get helicopter mods to work: most importantly the new OH-6A Loach mod, and secondly, the older classic UH-60L mod. I had seen some people on reddit mention that you could take the Huey LUA file and transplant them over, or something like that?

I see this tool uses SU-27 and I am not sure if it would work well with helicopters. I see you added a couple custom slots here and reserved some for future use. Anyway you could update this tool with a couple slots for these extremely popular helicopter mods? (Especially since they may function distinctly than aircraft mods based upon the SU-27?).

Thanks so much!

NOTE TO ALL: Also if anyone else in the thread here knows of an optimal way to get rotor bass shaker effects working with helicopter mods, input is welcome!

[=Andre=]

52 minutes ago, dsc106 said:

Andre, this is cool! Thanks! I have an additional question for you. I just came here trying to find a way to get helicopter mods to work: most importantly the new OH-6A Loach mod, and secondly, the older classic UH-60L mod. I had seen some people on reddit mention that you could take the Huey LUA file and transplant them over, or something like that?

I see this tool uses SU-27 and I am not sure if it would work well with helicopters. I see you added a couple custom slots here and reserved some for future use. Anyway you could update this tool with a couple slots for these extremely popular helicopter mods? (Especially since they may function distinctly than aircraft mods based upon the SU-27?).

Thanks so much!

NOTE TO ALL: Also if anyone else in the thread here knows of an optimal way to get rotor bass shaker effects working with helicopter mods, input is welcome!

Glad you are happy with it
Well, there is certainly something we can do with mods. To what limit depends on the mod. And SU-27 can be changed to any other from supported in SSA list.
Basically, I've made this tool as a proof of concept piece.  Haven't invested a lot of time in this as I'm busy with my new vibrating pad project.

Edited May 6, 2024 by =Andre=

[jasonstory44]

Hey,
shouldn't be hard to get it working with this little tool https://simshaker.com/attachments/get/11/simshaker_mods_support_gear_v.0.0.zip

Thank you Andre! This worked great!


Sent from my iPhone using Tapatalk

[bflo]

Some months back I was able to run SSA & HFS with no problem, but not at the same time.  Then something changed, & started getting the error message when running SSA with DCS.   I know about commenting out  in Export.lua, but it didn't help.   SSA works fine in MSFS,  only DCS has this problem.   One more thing to get SSA working in DCS again, I had to uninstalled HFS, but also had get rid of any left overs from it.  Any ideas on how  to fix this problem ?

Thanks

[LAEK]

Will we see support for F-4E Phantom on Tuesday? Would be great for full immersion from start.

[Baldrick33]

On 5/17/2024 at 7:34 PM, LAEK said:

Will we see support for F-4E Phantom on Tuesday? Would be great for full immersion from start.

Unless the SSA developer is part of the pre release testing team I can’t imagine this happening.

 

Edited May 19, 2024 by Baldrick33

[Ala12Rv-Tundra]

38 minutes ago, Baldrick33 said:

Unless the SSA developer is part of the pre release testing team I can’t imagine this happening.

 

 

With Heatblur Tomcat there was a nice collaboration hope the tradition goes on

[MarcT-NL]

Slowly all motors are dying from the JetPad . On the left, nothing works anymore. On the right one or two still work.

Anybody knows of a solution for this ?  If have looked into buying a new one, but 322 euro's plus taxes... that's rediculous.

[Bazz_Mulder]

10 hours ago, MarcT-NL said:

Slowly all motors are dying from the JetPad . On the left, nothing works anymore. On the right one or two still work.

Anybody knows of a solution for this ?  If have looked into buying a new one, but 322 euro's plus taxes... that's rediculous.

I have this one and it's great: https://nextlevelracing.com/products/hf8-haptic-gaming-pad/

[Hiob]

11 hours ago, MarcT-NL said:

Slowly all motors are dying from the JetPad . On the left, nothing works anymore. On the right one or two still work.

Anybody knows of a solution for this ?  If have looked into buying a new one, but 322 euro's plus taxes... that's rediculous.

It‘s probably not the motors, but the wires from the PCB to the motors. When You open the Jetpad, you‘ll find a very basic construction. The wires to the motors may wear out from all the movement on the seat. With basic soldering skills, you might be able to fix it yourself.

[Ala12Rv-Tundra]

12 hours ago, MarcT-NL said:

Slowly all motors are dying from the JetPad . On the left, nothing works anymore. On the right one or two still work.

Anybody knows of a solution for this ?  If have looked into buying a new one, but 322 euro's plus taxes... that's rediculous.

Or maybe you could lube them, I think Andre mentioned that previously 

[=Andre=]

12 hours ago, Ala12Rv-Tundra said:

Or maybe you could lube them, I think Andre mentioned that previously 

That was mostly about KW-908 motors. If you lubricate JetPad motors, use tiny portions of spray, too much lubricant can get things worse.
I'd recommend to rather replace JetPad motors along with the controller board, but due to the sanctions wall it's not very much easy to get the replacements.

[Mordants]

2 hours ago, =Andre= said:

That was mostly about KW-908 motors. If you lubricate JetPad motors, use tiny portions of spray, too much lubricant can get things worse.
I'd recommend to rather replace JetPad motors along with the controller board, but due to the sanctions wall it's not very much easy to get the replacements.

Mine no longer connects, what are the voltages on the JetPad motors?

[MarcT-NL]

I just measured 7.3 volt. I also measured that it's not the wiring, it's the controller that's not working. It being covered in glue and fabric doens't make it easier !

On 5/20/2024 at 9:30 PM, Bazz_Mulder said:

I have this one and it's great: https://nextlevelracing.com/products/hf8-haptic-gaming-pad/

This is actually a good alternative. Still en few thousand percent of profit I think, but ok... Thanks.

 

[pimp]

Hello @f4l0, should we expect support for the F-4 soon or are you not sure if you're going to get it any time soon? Flying just doesn't feel right without my seat vibrating.

[Uxi]

I was hoping to get a second jetseat for my wingman/RIO setup.  Does the nextlevel work with the same software? 

[eatthis]

7 hours ago, pimp said:

Hello @f4l0, should we expect support for the F-4 soon or are you not sure if you're going to get it any time soon? Flying just doesn't feel right without my seat vibrating.

i came here to ask that lol. itd be nice if the teams worked with andre pre release so it could be patched ready

[Ala12Rv-Tundra]

12 hours ago, pimp said:

Hello @f4l0, should we expect support for the F-4 soon or are you not sure if you're going to get it any time soon? Flying just doesn't feel right without my seat vibrating.

Generic jet settings don't work for me, for whatever reason

[Bazz_Mulder]

57 minutes ago, Ala12Rv-Tundra said:

Generic jet settings don't work for me, for whatever reason