whiteside Posted December 13, 2016 Share Posted December 13, 2016 1. I keep having the drag chute deploy for no known reason. 2. Aileron trim is just way too course. need finer adjustment.(I think this was reported before) 3. Gosh I wish there was an autopilot!!! Thanks guys. If you have not bought and flown the Agressor Campaign....GET IT! Well done! It's a real compliment to this aircraft. Will i9-9900K 3.6(Running at 5.0 GHZ) 32GB Memory 2x M.2 drives Win 10 64bit RTX 2080 Ti FTW3 Ultra OCULUS RIFT CV1 VKB Gunfighter 2 extended/TM Pedals/TM Warthog throttles. Link to comment Share on other sites More sharing options...
Erk104 Posted December 13, 2016 Share Posted December 13, 2016 I haven't had problems with the chute... but I have noticed that the Aileron trimmer is a bit too drastic for comfort not sure this was intended or if the real jet is like this as well. But yes cannot seem to get the plane trimmed as perfectly as I would like. I can do without an autopilot if I can fine tune the trim. :thumbup: Link to comment Share on other sites More sharing options...
razo+r Posted December 13, 2016 Share Posted December 13, 2016 for #3, Trim correctly and you shouldn't drift anywhere once the perfect Trim and travell speed is reached... And same here, didn't had any issues with the Chute Link to comment Share on other sites More sharing options...
ricktoberfest Posted December 13, 2016 Share Posted December 13, 2016 No issues with the chute here. But I will complain about the radar elevation adjust being way to sensitive with buttons (non axis) Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
ST0RM Posted December 13, 2016 Share Posted December 13, 2016 I've never been able to trim completely level in the roll axis. Pitch is fine once my power is set and stable. This is especially noticable carrying a AIM-9 and CATM combo. The AIM-9 is heavier, so you'd trim to compensate. Link to comment Share on other sites More sharing options...
whiteside Posted December 14, 2016 Author Share Posted December 14, 2016 Aileron trim is fine as long as you don't adjust it. Once you disturb it, you cannot trim back to level, trimmed flight. Have pilots found a workaround for this? I'm tired of fighting this aircraft on 1 hour maple flag missions. i9-9900K 3.6(Running at 5.0 GHZ) 32GB Memory 2x M.2 drives Win 10 64bit RTX 2080 Ti FTW3 Ultra OCULUS RIFT CV1 VKB Gunfighter 2 extended/TM Pedals/TM Warthog throttles. Link to comment Share on other sites More sharing options...
Pocket Sized Posted December 14, 2016 Share Posted December 14, 2016 IRL you would trim as close as possible over the course of a few minutes, then compensate for any residual with a pinch of side pressure. You would be flying the whole time anyway so it's not a massive issue. In the Sim it's a bit harder to deal with due to the inherent lack of precision in desktop joysticks. DCS modules are built up to a spec, not down to a schedule. In order to utilize a system to your advantage, you must know how it works. Link to comment Share on other sites More sharing options...
Reflected Posted December 14, 2016 Share Posted December 14, 2016 I also need finer adjustment for the radar antenna elevation. Facebook Instagram YouTube Discord Link to comment Share on other sites More sharing options...
grunf Posted December 14, 2016 Share Posted December 14, 2016 I also need finer adjustment for the radar antenna elevation. +1 Link to comment Share on other sites More sharing options...
whiteside Posted December 14, 2016 Author Share Posted December 14, 2016 It would be great to see what the guys programming the F5 have to say. i9-9900K 3.6(Running at 5.0 GHZ) 32GB Memory 2x M.2 drives Win 10 64bit RTX 2080 Ti FTW3 Ultra OCULUS RIFT CV1 VKB Gunfighter 2 extended/TM Pedals/TM Warthog throttles. Link to comment Share on other sites More sharing options...
Sydy Posted December 14, 2016 Share Posted December 14, 2016 I also need finer adjustment for the radar antenna elevation. I decided to set it in the joystick Z axis. Works like a charm! Link to comment Share on other sites More sharing options...
ricktoberfest Posted December 14, 2016 Share Posted December 14, 2016 I decided to set it in the joystick Z axis. Works like a charm! Unfortunately my x52 is quite old and all the rotaries and slides don't work anymore so I'm stuck with buttons unless I get rid of an essential axis like pitch, roll, or yaw. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
whiteside Posted December 14, 2016 Author Share Posted December 14, 2016 Needs finer adjustment in my opinion. i9-9900K 3.6(Running at 5.0 GHZ) 32GB Memory 2x M.2 drives Win 10 64bit RTX 2080 Ti FTW3 Ultra OCULUS RIFT CV1 VKB Gunfighter 2 extended/TM Pedals/TM Warthog throttles. Link to comment Share on other sites More sharing options...
Svend_Dellepude Posted December 16, 2016 Share Posted December 16, 2016 I second the roll trim being too coarse. I made a target profile for my TMWH and trim the x axis on the stick itself instead of trimming in game. Still sensitive but it's way better. [sIGPIC][/sIGPIC] Win10 64, Asus Maximus VIII Formula, i5 6600K, Geforce 980 GTX Ti, 32 GB Ram, Samsung EVO SSD. Link to comment Share on other sites More sharing options...
ED Team Foxhound_vva Posted December 20, 2016 ED Team Share Posted December 20, 2016 Aileron trim will be better in the future updates.:) Link to comment Share on other sites More sharing options...
Erk104 Posted December 20, 2016 Share Posted December 20, 2016 Aileron trim will be better in the future updates.:) AWESOME!!! :thumbup: Link to comment Share on other sites More sharing options...
ricktoberfest Posted December 20, 2016 Share Posted December 20, 2016 Aileron trim will be better in the future updates.:) Any news on radar elevation sensitivity? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts