bwRavencl Posted May 11, 2018 Posted May 11, 2018 Since we are pretty close to the early access release now, could we perhaps already get a list of all the Hornet's input commands and their corresponding key strokes? (Or simply a list of all the commands present on the HOTAS, if the preparation of a complete list would be too time consuming.) This way people using external controller mapping software could already start preparing profiles for the Hornet now and have them pretty much ready on release. :joystick: Thanks! ControllerBuddy - A highly advanced game controller mapping software (for flight simulators)
Wizard 1 Posted May 11, 2018 Posted May 11, 2018 +1 Homecockpit F/A 18C MK4 von Dogfight Boss | i7-8700k | Asus Rog Strix Z370-F | ASUS GEFORCE® GTX 1080 ROG STRIX | 16 GB RAM 2666 | 500 GB Samsung EU 860 EVO SSD | Corsair Hydro H100i V2 | TM Warthog |3 * TM MFD‘s | MFG Crosswind Rudder Pedals
Steel Jaw Posted May 11, 2018 Posted May 11, 2018 +2 Cheers "You see, IronHand is my thing" My specs: W10 Pro, I5/11600K o/c to 4800 @1.32v, 64 GB 3200 XML RAM, Red Dragon 7800XT/16GB.
VirusAM Posted May 11, 2018 Posted May 11, 2018 Yes...would be great... Would be great also to have early access manual R7-5800X3D 64GB RTX-4090 LG-38GN950 N/A Realsimulator FFSB MKII Ultra+F-16 grip+F/A-18 grip, VKB Stecs Max, VKB T-Rudder MKV, Razer Tartarus V2 Secrets Lab Tytan, Monstertech ChairMounts
LieutenantFalcon Posted May 11, 2018 Posted May 11, 2018 This is what I've gathered from other threads, I'd assume there buttons are all bindable
probad Posted May 12, 2018 Posted May 12, 2018 why dont we just ask for the entire rest of the module while we're at it
Vampyr Posted May 12, 2018 Posted May 12, 2018 for carrier landings or takeoffs, remember ctrl+E x 3.
Mad Dog 7.62 Posted May 13, 2018 Posted May 13, 2018 It would be great if it came set up for plug n play with the TM Warthog.... [sIGPIC][/sIGPIC] Gigabyte GA97XSLI Core i7 4790 @ 4.0 Ghz MSI GTX 1080ti 32 Mb RAM DDR3-2133 512GB SSD for DCS HP Reverb VR HMD Thrustmaster Warthog & MFG Crosswind
BrassEm Posted May 13, 2018 Posted May 13, 2018 +3 It would be great to be able to pre-configure the controllers so that it will be a sit in and fly on release. It takes a lot of effort to set up a full X-55 configuration. Not that the keys are going to change much from the press release version. The next couple of weeks are really going to drag and it would be better doing something productive. www.brass-em.com
Eaglewings Posted May 13, 2018 Posted May 13, 2018 The waiting has been long. I am very much for everything that we get us ready for fly the FA - 18C right away:manual, Hotas key binding, etc. I have been reading the NATOP manual but it looks quite daunting and deep. Windows 10 Pro 64bit|Ryzen 5600 @3.8Ghz|EVGA RTX 3070 XC3 Ultra|Corair vengence 32G DDR4 @3200mhz|MSI B550|Thrustmaster Flightstick| Virpil CM3 Throttle| Thrustmaster TFRP Rudder Pedal /Samsung Odyssey Plus Headset
malibu43 Posted May 13, 2018 Posted May 13, 2018 Even without the actual key commands, you can look in the NATOPS manual at what the functions are on the real HOTAS and start figuring out where they'll go on yours. I've already done this for my CH HOTAS, and then it's just a matter of looking up the key presses later and assigning them. It would be nice to have the manual, but you can get some of the work done without it.
bwRavencl Posted May 13, 2018 Author Posted May 13, 2018 (edited) The manual would be nice too :) Would be great also to have early access manual If they had the manual in a release-worthy state, we would certainly already have our hands on it. It's pretty obvious (also to ED) that everybody would like to have the manual as early as possible - thus it makes practically zero sense to ask for it. :doh: However, requesting a list of the key commands (which was the actual intention behind me starting this thread) is an entirely different story and not so obvious. ... and then it's just a matter of looking up the key presses later and assigning them. For complex aircraft like the Hornet the creation of a profile can take multiple hours and the "looking up" of the key commands is something that we could already do now while we are waiting for the Hornet to go EA. Of course what I am assuming here is that the definition of the commands is pretty much done right now and won't change drastically until release. Edited May 13, 2018 by bwRavencl fixed typo ControllerBuddy - A highly advanced game controller mapping software (for flight simulators)
Kayos Posted May 14, 2018 Posted May 14, 2018 If they had the manual in a release-worthy state, we would certainly already have our hands on it. It's pretty obvious (also to ED) that everybody would like to have the manual as early as possible - thus it makes practically zero sense to ask for it. :doh: . It's already in the hands of press people, so ya, they could let us see that version. But as you say, it make zero sense to ask for it :bash: [sIGPIC][/sIGPIC]
AG-51_Sabot Posted May 14, 2018 Posted May 14, 2018 Why not ask for it? The worst that’ll happen is you’re told “no.” "There is an art … to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, The Hitchhikers Guide to the Galaxy https://www.cag-51.org/contact
Timotsuky Posted May 14, 2018 Posted May 14, 2018 lol i think this topic is going too much far.. as malibu43 said, that waiting is making youtotally psycho
crab Posted May 17, 2018 Posted May 17, 2018 In one of the live casts Wags says something about including a profile(s), cant recall if it was his personal or what, maybe someone with a better memory will chime in...?
Bullitthead Posted May 17, 2018 Posted May 17, 2018 This video has the key bindings shown for most/all? of the HOTAS. It goes by quick so pause the video and use the , and . keys to advance and rewind the video frame by frame.
bwRavencl Posted May 17, 2018 Author Posted May 17, 2018 Here ya go: Thanks! :thumbup: ControllerBuddy - A highly advanced game controller mapping software (for flight simulators)
Steel Jaw Posted May 17, 2018 Posted May 17, 2018 Cheers. .. that's a good start to keep us busy getting ready. "You see, IronHand is my thing" My specs: W10 Pro, I5/11600K o/c to 4800 @1.32v, 64 GB 3200 XML RAM, Red Dragon 7800XT/16GB.
malibu43 Posted May 17, 2018 Posted May 17, 2018 Where did you find this ? Youtube video linked on the previous page.
malibu43 Posted May 17, 2018 Posted May 17, 2018 Here's my stab at a CH HOTAS layout. No SHIFT commands as I still have some open buttons, but can always change that later after once I learn how things are working.
Recommended Posts