Bagpipe Posted July 11, 2020 Share Posted July 11, 2020 https://github.com/Khopa/dcs_liberation/releases/tag/2.0RC9 Thank you Link to comment Share on other sites More sharing options...
JCae2798 Posted July 11, 2020 Share Posted July 11, 2020 What I love about this campaign is it gives you the opportunity to use your different modules. What's missing though is Helo transport missions unless i missing something. Any plans or ways we can help add this in future builds? Link to comment Share on other sites More sharing options...
Bagpipe Posted July 11, 2020 Share Posted July 11, 2020 It has certainly come along since i last tried it with the original build. A lot more dynamic though the AI in DCS is still a nightmare. My first mission my wingman bailed out after burning through his fuel while I still had 5000lbs left...bummer! Link to comment Share on other sites More sharing options...
Rykane Posted July 13, 2020 Share Posted July 13, 2020 Hey guys, I've recently started to get into DCS Liberation however I'm having some issues especially when it comes to the air to ground missions especially strike missions. I've found that whenever I select a flight and load up the mission get to the target I cannot find any objectives or units at the waypoints that were designated. For example, a mission was to take out 3 BTR-80s and I flew to the target waypoints and there was nothing there and the objective marker/steer points were on top of a large building. I also selected a flight to take out some hangars but the steerpoints were out in the middle of the desert with nothing near them. I also flew the mission and there was nothing there to double-check. Does anyone else have this issue or am I doing something wrong? Link to comment Share on other sites More sharing options...
VeeSPIKE Posted July 13, 2020 Share Posted July 13, 2020 What does the mission look like if you open it in the Editor? Link to comment Share on other sites More sharing options...
Rykane Posted July 13, 2020 Share Posted July 13, 2020 (edited) It looks like this currently. The mission is to destroy objectives at DACHSHUND however there are no targets there. Looks like I found the issue, I ticked cull units and set it to 80nm as without it enabled my FPS was in the low teens in VR. However, with it on my FPS was perfect. My thinking was it culled the units and made them appear once you reach that certain distance. It seems to have removed them completely (I'm not sure if this is intended). Is there any way around this or do I just need to increase the cull distance to say 200km? Edited July 13, 2020 by Rykane Link to comment Share on other sites More sharing options...
Bagpipe Posted July 14, 2020 Share Posted July 14, 2020 It looks like this currently. The mission is to destroy objectives at DACHSHUND however there are no targets there. Looks like I found the issue, I ticked cull units and set it to 80nm as without it enabled my FPS was in the low teens in VR. However, with it on my FPS was perfect. My thinking was it culled the units and made them appear once you reach that certain distance. It seems to have removed them completely (I'm not sure if this is intended). Is there any way around this or do I just need to increase the cull distance to say 200km? I would take the headset off until FPS improves :music_whistling::smilewink: I had to, sorry!!! Link to comment Share on other sites More sharing options...
Rykane Posted July 14, 2020 Share Posted July 14, 2020 I would take the headset off until FPS improves :music_whistling::smilewink: I had to, sorry!!! I tried to trust me, haha. I can't go back to non-vr. I talked on the discord and the developer replied with him knowing about the culling issue where it just straight up removes units. He said he wants it to eventually hide them etc. For now, he recommended trying smaller theatres. Link to comment Share on other sites More sharing options...
RglsPhoto Posted July 14, 2020 Share Posted July 14, 2020 (edited) Issue fixed by updateing to the lastest version Edited July 14, 2020 by RglsPhoto I7-6700K OC 4.9G, 896G SSD, 32G RAM @ 2400MHz, NH-D15 cooling system,TM Hotas Warthog,Saitek Pro Flight Rudder Pedals,TrackIr 5, BOSE M2 Link to comment Share on other sites More sharing options...
oscar19681 Posted July 15, 2020 Share Posted July 15, 2020 Gotta give this a try soon. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
oscar19681 Posted July 15, 2020 Share Posted July 15, 2020 Gotto give this a try soon. Does it support The super carrier mod? [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
The_Dan Posted July 15, 2020 Share Posted July 15, 2020 Yes. Link to comment Share on other sites More sharing options...
ZeroReady Posted July 16, 2020 Share Posted July 16, 2020 Thanks to everyone who made this possible. Finally got it working and finished my first mission, took out a Kub site in a harrier, chased halfway back by a mig through the valleys, dodged two of his missiles but he got me in the end. Lots of fun. I just have a question. When I finish the mission and save the debrief, does the filename matter? I just saved it as 1, that seemed to work. Liberation counted the mission and everything seemed to save. Just want to be sure I'm doing it right. Thanks again! Link to comment Share on other sites More sharing options...
Quax456 Posted July 17, 2020 Share Posted July 17, 2020 Yes. How do I implement the SC's instead of the Stennis? It's realy complicated to understand in the description. Any help is highly appreciated My Rig: Windows 11 Pro, Intel i7-13700k@5.4GHz, 64GB DDR5 5200 RAM, Gigabyte Z790 AORUS Elite AX, 1TB Samsung EVO 970, RTX4080, Thrustmaster HOTAS WARTHOG + Saitek Pro Flight Pedals, LG 32" 4K 60FPS, ACER 30" 4K 60FPS GSync Display, HP Reverb G2 V2 Link to comment Share on other sites More sharing options...
The_Dan Posted July 17, 2020 Share Posted July 17, 2020 Go to settings and the search for a checkbox like "use supercarrier". Click on it and then the sc module is used in the missions instead of the Stennis. Link to comment Share on other sites More sharing options...
Quax456 Posted July 17, 2020 Share Posted July 17, 2020 Go to settings and the search for a checkbox like "use supercarrier". Click on it and then the sc module is used in the missions instead of the Stennis. There is no Settings Page/Button. In the Configuration is not SC checkbox either! My Rig: Windows 11 Pro, Intel i7-13700k@5.4GHz, 64GB DDR5 5200 RAM, Gigabyte Z790 AORUS Elite AX, 1TB Samsung EVO 970, RTX4080, Thrustmaster HOTAS WARTHOG + Saitek Pro Flight Pedals, LG 32" 4K 60FPS, ACER 30" 4K 60FPS GSync Display, HP Reverb G2 V2 Link to comment Share on other sites More sharing options...
The_Dan Posted July 17, 2020 Share Posted July 17, 2020 Then you might use the original Version. Try Khopa's forked Version which has a lot of improvements: https://github.com/Khopa/dcs_liberation/releases/tag/2.0RC9 Link to comment Share on other sites More sharing options...
Quax456 Posted July 17, 2020 Share Posted July 17, 2020 Thx....was on the old 1.5 Version....big Thx Buddy! My Rig: Windows 11 Pro, Intel i7-13700k@5.4GHz, 64GB DDR5 5200 RAM, Gigabyte Z790 AORUS Elite AX, 1TB Samsung EVO 970, RTX4080, Thrustmaster HOTAS WARTHOG + Saitek Pro Flight Pedals, LG 32" 4K 60FPS, ACER 30" 4K 60FPS GSync Display, HP Reverb G2 V2 Link to comment Share on other sites More sharing options...
itarrow Posted July 18, 2020 Share Posted July 18, 2020 Hey there, used this campaign long time ago... is there now the possibility to fly air to air missions ? Link to comment Share on other sites More sharing options...
Recluse Posted July 18, 2020 Share Posted July 18, 2020 Resolution of GUI window? Sorry if this has been covered already. I couldn't read every message in the thread and searches didn't pick it up. I run at 1680x1050 and when I use the screen to configure the assets I cannot get to the bottom of the screen to select AWACS, or in fact to even OK the selections to generate the campaign. I must be missing something simple, but I haven't been able to scroll, drag, resize or do anything else to get to the bottom of the screen. Help :dunno::dunno: Link to comment Share on other sites More sharing options...
Gioepyon Posted July 18, 2020 Share Posted July 18, 2020 Hi, Is there a way to edit the aircraft and ground units that the coalitions use? Link to comment Share on other sites More sharing options...
Quax456 Posted July 19, 2020 Share Posted July 19, 2020 FIRST: That is a hell of a good Frontend for a real dynamic campaign. Thats it what the comunity was looking for.... BIG BIG THX to the CODERS! My Rig: Windows 11 Pro, Intel i7-13700k@5.4GHz, 64GB DDR5 5200 RAM, Gigabyte Z790 AORUS Elite AX, 1TB Samsung EVO 970, RTX4080, Thrustmaster HOTAS WARTHOG + Saitek Pro Flight Pedals, LG 32" 4K 60FPS, ACER 30" 4K 60FPS GSync Display, HP Reverb G2 V2 Link to comment Share on other sites More sharing options...
dokken1212 Posted July 19, 2020 Share Posted July 19, 2020 FIRST: That is a hell of a good Frontend for a real dynamic campaign. Thats it what the comunity was looking for.... BIG BIG THX to the CODERS! Totally agree with this, brilliant work :-) Thank you Computer Specs: AMD Ryzen 9 3900x Thermaltake 360 AIO Water Cooler 32GB Corsair Vengeance 3600Mhz RGB RAM GeForce RTX 2080 Super [ NVIDIA] 512GB Adata M2 NVME (boot drive) 1TB Adata M2 NVME 1TB WD Blue SSD Corsair RM850x Power Supply Phanteks Enthoo Evolve Case Samsung 43" 4K Smart TV (used as monitor) TRACK IR 5 + Wireless DelanClip Head Tracker Thrustmaster Warthog HOTAS :pilotfly::pilotfly::pilotfly::pilotfly::pilotfly::pilotfly::pilotfly: Link to comment Share on other sites More sharing options...
ccamillo Posted July 19, 2020 Share Posted July 19, 2020 Sorry if this has been covered already. I couldn't read every message in the thread and searches didn't pick it up. I run at 1680x1050 and when I use the screen to configure the assets I cannot get to the bottom of the screen to select AWACS, or in fact to even OK the selections to generate the campaign. I must be missing something simple, but I haven't been able to scroll, drag, resize or do anything else to get to the bottom of the screen. Help :dunno::dunno: I think you are using the old version. Try this https://github.com/Khopa/dcs_liberation/releases/tag/2.0RC9 Link to comment Share on other sites More sharing options...
fille_swe Posted July 19, 2020 Share Posted July 19, 2020 Found out about this today, really nice. Got a few missions going but i have a question. Are you able to callout for groundforces or other air assets to strike a certain object or help you. Link to comment Share on other sites More sharing options...
Recommended Posts