Barthek's CAUCASUS REDONE 2022

[Megalax]

On 12/10/2024 at 10:03 AM, Archangel44 said:

Alright, good to know. Thank you.

I'll check around for other stuff. 

I have the exact same issue with Caucausus now, but even after I've removed all mods it still hangs at Terrain Graphics Init ; 97, caucasus.ng5.

I'm running a deep repair to see if it it helps.

[Scotty Rotten]

If I remember correctly this error-on-loading screen was caused by a C-130 Hercules mod loadout that conflicted with the CJS Superhornet. Check their (CJS) discord, in the FAQ, there is the solution (editing a line in .lua) that fixed it.

Edited December 19, 2024 by Scotty Rotten

[Megalax]

3 hours ago, Scotty Rotten said:

If I remember correctly this error-on-loading screen was caused by a C-130 Hercules mod loadout that conflicted with the CJS Superhornet. Check their (CJS) discord, in the FAQ, there is the solution (editing a line in .lua) that fixed it.

Yeah I just found that.

[Bucic]

Just a heads up - you may be misled into thinking a terrain mod (this or that) is causing a performance drop for you. You may actually be experiencing this

https://forum.dcs.world/topic/366205-performance-trees-huge-performance-hit-especially-up-close/

Also a reminder: MSAA is currently broken.

 

Edited December 19, 2024 by Bucic

[Alighierian]

On 12/19/2024 at 4:23 PM, Scotty Rotten said:

If I remember correctly this error-on-loading screen was caused by a C-130 Hercules mod loadout that conflicted with the CJS Superhornet. Check their (CJS) discord, in the FAQ, there is the solution (editing a line in .lua) that fixed it.

What is the fix in question?

Both the CJS discord links I found were dead.

 

Edit:
Found this post via a different topic

It didn't appear to do much, however, and still got stuck during load.

 

I disabled the 130 and OH-6 for now (dunno if it's affected, but I'm not using it anyway), and ran a deep repair.
Appears to be working for now.

 

Edit 2:
Found the actual issue on my end; bandit's weather mod was still on v10.
Loading went as normal after updating to the latest version (v15 atm).

 

It was rather inconsistent at failing, so it took me a few tries to find it.

Edited December 25, 2024 by Alighierian

[idkmoz]

Can someone help me please? im having this problem with missing hangar textures 

[Hammer1-1]

you installed it incorrectly. IIRC that only happens if you didnt unzip certain files (or they were installed in the wrong directory). Did you install this into your saved games folder or main directory?

[idkmoz]

i drag dropped the Bazar and Mods folders into the Main directory

[MAXsenna]

i drag dropped the Bazar and Mods folders into the Main directory

You really should start using a mod manager. That way, if anything goes wrong, you can just uninstall it and do a repair. For these kind of mods I use SLAM as the mod manager to deploy it quicker and lessn the burden on my drives.
I've had no issues lately with the mod. If I was you, I'd perform a full repair, and then read the instructions one more time.

Sent from my SM-A536B using Tapatalk

[Morpheus]

On 2/11/2025 at 8:26 PM, idkmoz said:

Can someone help me please? im having this problem with missing hangar textures 

Had the same last time I tried it, and using mod manager is essential because you have to uninstall mod before updates. DCS will download original files and erase the mod with every update. For shelter you have a mod for textures or find original one and include it in the mod

[idkmoz]

10 hours ago, Morpheus said:

Had the same last time I tried it, and using mod manager is essential because you have to uninstall mod before updates. DCS will download original files and erase the mod with every update. For shelter you have a mod for textures or find original one and include it in the mod

yes it worked thank you very much

[Tomcatter87]

On 2/11/2025 at 8:26 PM, idkmoz said:

Can someone help me please? im having this problem with missing hangar textures 

Here you go, works well with Barthek's wonderful textures too: Terrain Matching Caucasus Hangar Textures for 2.8

[devnull]

hi folks, i have a question, maybe someone can help me out with it.
i installed the bartek terrain mod. i am often playing a custom mission but i recently noticed, that the mod does not get applied in it? Yesterday i played a default mission from DCS and first saw the difference
Is there a setting or a posibillity to define the terrain used (inclusive bartek mod) for a custom mission? Or what could be the reaseon that the mod gets not applied in my custom mission?!

 

cheers

[Yurgon]

2 hours ago, devnull said:

Is there a setting or a posibillity to define the terrain used (inclusive bartek mod) for a custom mission?

This is probably obvious, but just to get it out of the way: Barthek's mod only works in the Caucasus terrain. If you play a mission in any other terrain, Bathek's mod does nothing at all.

That said, I don't think missions have any influence over terrain mods - there's no way to tell a mission to use this mod or not. Seeing the mod in one mission but not in another (in the same terrain), that's pretty weird, and I don't have any idea how this could happen.

That might point to a faulty or corrupted installation of either DCS or the terrain mod.

A proper cleanup would be:

• Repair DCS from the launcher
• Run a Cleanup from the launcher, remove all obsolete files
• Rename Saved Games\DCS (*) and try again clean
• Install the mod again and try once more, verify it's properly installed

(*) Saved Games\DCS: the full default path is C:\Users\{Your Windows Username}\Saved Games\DCS, or its localized equivalent

Note: The mod goes into the DCS installation directory, not the Saved Games\DCS directory. But it's still possible that other mods within the Saved Games\DCS structure might cause problems

[devnull]

maybed its just my misunderstanding of how it works or my bad explaination. I have Bartek + Snowless winter. Do i have to switch the "season" in the mission somehow? i am expecting to have a little snow .
i have added the mod using JSGME

[MAXsenna]

maybed its just my misunderstanding of how it works or my bad explaination. I have Bartek + Snowless winter. Do i have to switch the "season" in the mission somehow? i am expecting to have a little snow .
i have added the mod using JSGME

First you must install Barthek's mod, then the snow less winter on top. Then set the date to winter, obviously.

Sent from my SM-A536B using Tapatalk

[devnull]

install is ok, that was the trick, just under weather select a month in winter or autumn Thanx guys for helping me out.  thinking in the correct direction.

[MAXsenna]

install is ok, that was the trick, just under weather select a month in winter or autumn Thanx guys for helping me out.  thinking in the correct direction.

Awesome!

Sent from my SM-A536B using Tapatalk

[ouky1991]

I tried to make something similar to the early tests Barthek posted some time ago and edited some of his textures. Not as good but I kinda like it

[Pingodingo]

So i have been using these textures for a long time and just recently after the latest update they stopped working. i have removed the old ones before installing the new ones but i cant get it working. anyone have the same problem?

 

EDIT: Important to set your terrain textures to high lol otherwise it will just be vanilla textures

 

Edited March 31 by Pingodingo

[Patryk991]

Sorry that here but after a total computer failure I lost the settings for reshade from Bartek, maybe someone has them and is willing to share them. Thanks, have a nice day!

[tomeye]

There is a reshade preset on the first post, does this work?

[Patryk991]

1 hour ago, tomeye said:

There is a reshade preset on the first post, does this work?

Unfortunately not The requested file does not exist.

Check if the URL is correct and if the file exists.

 

That's why I'm asking for the file.

[Blazkovitch]

I think that this is the preset.

Barthek.ini

[Patryk991]

Blazkovitch Thank you very much. Have a nice day!